Milagrow iMap10.0 User manual

iMap10.0
A0
User Manual
Thank you for purchasing this Robot.
Please read the user guide carefully before use.
RoboticVacuumCleaner

iMap10.0
Table of Contents
1. Safety Instructions
2. Robot Overview
4. Operating Instructions
5. Maintenance
1.1 Instructions for use
1.2 Safety precautions
1.3 About child safety
1.4 About the batteries
1.5 Scope of use of the product
1.6 Disclaimers
2.1 Robot and its accessories
2.2 Robot and dust box
2.3 Robot and its sensors
3. Robot Installation
2.4 Mop module
2.5 Charging dock
4.1 Use of the machine
4.2 Sweep modes
4.3 Select suction intensity
4.4 Use of mop module
4.5 Map management
4.6 System reset
5.1 Clean the dust box and water tank
5.2 Clean the main brush
7.1 Voice prompts
7.2 Troubleshooting
7.2 Faults in Wi-Fi connection
5.3 Clean the side brushes
5.4 Clean casters
5.5 Clean sensors and charging electrodes
5.6 Clean the mop module
7. Common Faults
8. Warranty Card
6. Basic Parameters
- 01 -
……… 2-4 …………… 17-20
…………… 21
…………… 22-27
…………… 28
……… 5-8
……… 8-11
……… 11-16
Thank you for purchasing the Milagrow iMap 10.0 Intelligent Robotic
Vacuum Cleaner. We hope you will enjoy it!
If you have any questions about the product during use, please call
our service Number 9953476189 or email customercare@milagrow.in

iMap10.0
- 02 -
1.1 Instructions for use
Please pay attention to the following basic safety precautions before using the product:
1.2 Safety precautions
* Read the user manual carefully and follow the instructions in the user annual when using the product.
* Save the user manual for future reference.
* If you need to transfer the product to a third party, please attach the user manual along with the product.
* Any operation not in conformity to the instructions in the user manual may result in serious personal injury
or damage to the product itself.
1. Safety Instructions
This product can only use the adapter, batteries and charging dock
that are provided with this product. Failure to do so may result in
damage to the product, electrical shock, or fire caused by high
voltage.
Do not use this product if the host machine and accessories of this product
are found to be damaged. Contact our after-sales service department.
Except for the service technicians designated or authorized by our company,
no one should disassemble, repair or modify this product.
If the user manual is missing, please contact your local dealer or call the
after-sales service department to obtain an electronic user manual.
Warning
Unplug the product before maintenance.
Do not touch the power plug or the product when your hands are wet, as
this may result in electrical shock.
If the power cord is damaged, it must be replaced by the manufacturer, its
service department or a similar professional to avoid danger.
To prevent the product from falling accidentally, do not use this product in a
suspended place without a protective fence, which may result in personal
injury. keep cleaning the tall sensors regularly
The user shall not replace the batteries privately. from load sources only
original batteries sold by Milagrow are to be used
Do not place the product near fire or flammable/explosive/corrosive
materials.
Prevent clothing or any part of your body (hair, fingers, etc.) from getting
caught in the brush or wheel of the vacuum cleaner. Failure to do so may
result in personal injury.

iMap10.0
- 03 -
* Children under the age of 8 are not allowed
to use this product. Persons with physical,
sensory or intellectual disabilities or lack of
relevant experience/knowledge cannot use the
machine unless under supervision, operating
instructions or awareness of the danger.
Children are not allowed to play with the
machine or clean/repair the machine unless
under supervision.
* Children are not allowed to play with the
1.3 About child safety
product's packaging bag for fear of suffocation.
Do not use this product
in a wet, flammable,
explosive or corrosive
environment.
Do not use this product
to suck in sharp objects
(e.g. shattered glass and
nails) for fear of damage
to the product.
This product can only be
used indoors.
Prevent the suction of
water, oil or other liquids,
which may damage the
vacuum cleaner.
Arrange scattered wires
on the floor before use
for fear of affecting
the normal operation of
the vacuum cleaner.
Remove fragile objects
before use.
When the product is
working, removal of the
charging dock will affect
the normal recharging of
the machine.
Caution
Unplug the charging dock
if it remains unused for
a long time.
The charging dock should
be placed against the
wall and on a flat floor
for fear of affecting
product functionality.
High voltage! Please dry your hands
before operation for fear of
electrical shock!

iMap10.0
- 04 -
1.5 Scope of use of the product
1.6 Disclaimers
Under any of the following circumstances, the product will be excluded from the scope of free warranty, but
paid repair can be provided:
A. Damage due to the user’s failure to operate the product in strict accordance with our user manual or due to
improper storage;
B. The machine or parts have exceeded the free warranty period;
C. Damage due to disassembly by those other than the maintenance personnel of our company or authorized
by our company;
D. A valid purchase voucher number is not available.
E. The product model on the warranty card does not match that of the product to be repaired or is altered;
F. Damage caused by irresistible factors such as natural disasters;
G. Product failure or damage caused by unexpected factors or man-made causes (including operational errors,
liquid ingress, improper plugging/unplugging, scratching, handling, bumping, input of inappropriate voltage,
The product is suitable for the following floors:
etc.)
Wooden floor Ceramic tile Short-staple carpet
Scope of application
1.4 About the batteries
1.Only the batteries provided by the Milagrow are applicable to the product.
2.The batteries should be removed when the product is discarded.
3.If you need to replace the battery of the host machine, please contact our
after-sales service department. Use of wrong batteries may cause a safety
accident.
4.If the batteries leak, prevent the contact of the liquid with the skin or
clothing. Immediately wipe it with a dry cloth and send it to the recycling
station or designated maintenance point. Do not discard it in open or public areas
5.Please properly dispose of the old batteries of the product.The batteries contain
hazardous substances harmful to the environment. Please follow the local
environmental regulations and send them to the designated recycling site.

iMap10.0
A0
Robot Vacuum
User Manual
LSB1
Thank you for purchasing this product.
Please read the user guide carefully before use.
2. Product Overview
2.1 Robot and its accessories
Accessories
Robot
- 05 -
* A side brush and a filter combination
as well as a battery have been
installed in the robot.
Tips:
Charging dock×1 Power adapter×1
User manual×1 Mopping cloth×1
Filter combination×1
Mopping cloth×1
Side brush×1
+
• Press to return for charging. Press again to pause
• Press and hold for 3 seconds to start Spot Cleaning
Recharge button
Sweep/on/off button
Flip port
• Press and hold for 3 seconds to turn on or off (if
it's not being charged)
• Press to start sweep
• Press to pause the task being performed
Power Indicator
Recharge button + on/off button
• White: Battery level ≥20%
• Pink: Battery level < 20%
• Blinking like breathing: Being charged or started
• Blinking fast in red: Fault
• Press and hold both buttons simultaneously
for 3 seconds to reset Wi-Fi connection

iMap10.0
2.2 Robot and dust box
- 06 -
Wi-Fi indicator:
Blinking slowly in white: Wait for connection
Blinking fast in white: Being connected to Wi-Fi
Normally on in white: Wi-Fi connected
System reset button
Water outlet adapter
Dust box and water tank
Button for taking out dust box and water tank
Combination of water tank
and dust box (detachable)
Air outlet
Water tank outlet
Water inlet cap
Filter
Cleaning brush
Water inlet
Buckle
Pre-filter
Foam filter
Dust box and water
tank separation button
High-performance filter
Suction inlet

iMap10.0
2.3 Robot and its sensors
- 07 -
Collision bumper
2.4 Mop module
Along-wall sensor
Anti-drop sensor
Lidar module
Pressure sensor
Side brush
Charging electrode
Caster
Rolling brush
Rolling brush cover
Caster
Water outlet
Buckle
Water outlet
Removal button Washable
mopping cloth
Slot
Stick a mopping
cloth here
Buckle

iMap10.0
Charging dock indicator
- 08 -
Normally on in white: The charging dock has been connected to a power supply
(when the robot is not charging on the charging dock)
2.5 Charging dock
White light off: The robot is correctly connected with the charging dock
Charging electrode
Status indicator
Wiring terminal
Power cord
Power cord take-up bin
Wire outlet
Cover
Power socket
3. Robot Installation
1. Connect the charging dock with the adapter. Prevent the adapter wire
from winding the machine during sweep.
A B C

iMap10.0
- 09 -
2. Based on your personal needs, decide whether to install a waterproof pad.
After installation, connect the adapter to the wall socket and keep the power
on.
3. Place the charging dock on a flat hard ground perpendicular to a wall and
keep it clear of obstacles within 1.5 meters in front of it and within 0.5 meters
Waterproof pad (optional)
on its left and right.
0.5M 0.5M
1.5M
Note:
* Install the charging dock at a location easily accessible by the robot. It is recommended to
place the charging dock on a hard ground, instead of a carpet, against a wall.
* Keep the charging dock powered, or the robot will not automatically return.
* To ensure normal charging, do not move the charging dock frequently. Once the robot
location is changed, the robot may regenerate a map due to repositioning failure (for
details, see Operating Instructions > Map Management).
AB
Press and hold on the robot for 3 seconds to turn it on. Before use for the first
time, the machine shall be fully charged (about 4 hours) to ensure normal operation.
* Place the robot on the charging dock and align it with the charging port. When
4. Startup and charging
the white indicator on the charging dock goes off, charging will begin.
The power indicator color indicates
the battery level:
* White ≥20%
* Pink < 20%
Other manuals for iMap10.0
1
Table of contents
Other Milagrow Vacuum Cleaner manuals

Milagrow
Milagrow RedHawk MGRV01 User manual

Milagrow
Milagrow Seagull Instruction manual

Milagrow
Milagrow iMap10.0 User manual

Milagrow
Milagrow iMap Venii Max User manual

Milagrow
Milagrow Aguabot 5.0 User manual

Milagrow
Milagrow BlackCat MGRV02 User manual

Milagrow
Milagrow BlackCat User manual

Milagrow
Milagrow Spaze Wet User manual

Milagrow
Milagrow RoboPurifier 7.0 User manual

Milagrow
Milagrow BlackCat 21 User manual





















