Mifang Network Technology T16 User manual
True Wireless Earbuds
User Manual
Thank you for purchasing our product. This manual addresses
the safety guidelines, warranty, and operating instructions.
Please review this manual thoroughly before operating your
device.
T16
Package Contents.............................................................
At a Glance.......................................................................
How to Wear.....................................................................
Earbuds LED Indicator Guide...........................................
Charging Case Indicator Guide........................................
Using Your T16.................................................................
FAQS................................................................................
Specifications..................................................................
Safety and Warranty........................................................
1
1
2
3
3
4
9
11
12
English Version
●Wireless Earbuds × 1 pair (left and right)
●Charging Case × 1
●Micro USB cable × 1
●User Manual × 1
Package Contents
At a Glance
Earbuds
- 1 -
Microphone
Touch Button
LED Indicator
Charging Contacts
- 2 -
Charging Case
How to Wear
Insert the earbud into your ear and rotate to fit
comfortably.
Charging Pins
Micro USB Charging Port
Charging
Case Indicator
- 3 -
Earbuds LED Indicator Guide
System State
Power on
Power off
Pairing mode
Charging
Fully Charged
Indicator Activity
The LED indicator stays blue for 1
second.
The LED indicator flashes red twice.
The LED indicator flashes red and
blue alternately.
The LED indicator stays red.
The LED indicator goes off.
Charging Case Indicator Guide
System State
Charging
Fully charged
Indicator Activity
The charging case indicator flashes
blue slowly.
The charging case indicator stays
blue.
- 4 -
Using Your T16
Charge the earbuds
Put the earbuds into the charging case.
Note:
When your earbud battery life is low, you will hear a
voice reminder.
Charge the charging case
1) Plug the small end of the USB cable into the Micro
USB port of the charging case.
2) Plug the other end into a USB wall charger or
computer (DC 5V) that is powered on.
- 5 -
Note:
It takes approximately 2 hours to fully charge the
charging case. A fully charged charging case can
charge the earbuds approximately 3 times.
Power on & off
Automatic operation
Power on: Open the lid of the charging case and take
the earbuds out.
Power off: Put the earbuds back into the charging
case.
Note:
When the charging case is out of power, putting the
earbuds back in the charging case will not turn the
earbuds off.
Manual operation
Power on/off: Tap and hold the touch button on the
left/right earbud for 5 seconds.
Note:
When the two earbuds are paired with the phone, turn
off one earbud manually will make the other one be
off at the same time.
- 6 -
Pairing & Connectivity
1) Turn on the Bluetooth of your Bluetooth device.
2) Take the earbuds out of the charging case and
they will enter pairing mode automatically and the
LED indicator on the earbud will flash red and blue
alternately.
3) Choose "T16" from the list of found Bluetooth
devices on your Bluetooth device to pair.
Notes:
●Make sure the earbuds and your Bluetooth device
are next to each other within 33 feet or 10 meters
and there are no obstacles between.
●If pairing failed, put the earbuds back into the
charging case make sure that they have been
turned off. Then pair the earbuds with your
Bluetooth device again.
●When the earbuds are on but not paired with a
Bluetooth device, they will be automatically off after
5 minutes.
●The earbuds will connect to the last paired
Bluetooth device automatically when they are
turned on. Please turn on the Bluetooth of your
Bluetooth device before turning on the earbuds.
- 7 -
Primary/Secondary mode
These earbuds have primary-secondary switch
function.
●When the earbuds have been connected to a
Bluetooth device, take out either of the two
earbuds, it can be connected and used normally.
During this period, you can take out the other one
and they will pair with each other so you can use
both of the earbuds.
●When both earbuds are connected to your phone,
no matter which one is put back to the charging
case, you can use the other one without
interruption.
Earbuds functions
Function
Play/Pause
Next track
Previous track
What to do
Tap the touch button of the left/right
earbud.
Double-tap the touch button of the
left/right earbud.
Tap the touch button of the left/right
earbud three times.
- 8 -
Call functions
Function
Answer/end a call
Decline an
incoming call
What to do
Tap the touch button of the left/right
earbud.
Double-tap the touch button of the
left/right earbud.
Activate voice control of phone
After the earbuds are connected to your phone, tap
and hold the touch button for 2 seconds and remove
your finger from the touch button.
Tap and hold the touch button for 2 seconds again to
exit. (This function works only when your phone has
voice control function; please refer to the instructions of
your phone for details.)
Clean the earbuds and charging case
Clean the earbuds and charging case only with a dry,
soft cotton swab or equivalent.
Table of contents
