Miele G 7883 User manual

Operating Instructions

Laboratory Glassware

Washer

G 7883

To prevent accidents

and machine damage

read these instructions

before

installation or use.

M.-Nr. 05 893 860

IMPORTANT SAFETY INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Description of the machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

G ide to the lab washer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Opening and closing the door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Water softener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Setting the water softener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Filling the salt reservoir . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Salt indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Adding rinse aid. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Setting the rinse aid dosage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Adding ne tralizing agent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Adding detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Loading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Adjusting the upper basket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Program g ide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Turning on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Starting a program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Drying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Changing a program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

At the end of a program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Turning off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Canceling a program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Programming special f nctions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Machine care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Tro ble shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

After Sales Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Pl mbing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Water inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Contents

This appliance is only intended for

specialized applications. Only use

the appliance for its intended

purpose. Any other use, conversion

or modification is dangerous. The

manufacturer cannot be held

responsible for damages caused by

improper use of this machine.

This appliance complies with current

safety requirements. Improper use of

the appliance can lead to personal

injury and material damage.

Read all instructions before installing

or using this appliance.

Keep these operating instructions in

a safe place and pass them on to

any future user.

Installation and Service

The machine should only be

installed, maintained and repaired

by a Miele authorized service

technician. Repairs by unqualified

persons could be dangerous.

Do not install the machine in an

area where a danger of explosion

or freezing may be present.

Be certain this appliance is

properly installed and grounded by

an authorized technician. To guarantee

the electrical safety of this appliance,

continuity must exist between the

appliance and an effective grounding

system. It is imperative that this basic

safety requirement be met. If there is

any doubt, have the electrical system of

the building checked by a qualified

technician. The manufacturer cannot be

held responsible for damage or injury

caused by the lack of or inadequacy of

an effective grounding system.

A damaged machine is dangerous;

turn off the machine at the main

power supply immediately and call the

Miele Technical Service Department.

Before servicing, disconnect the

power supply by either removing

the fuse or "tripping" the circuit breaker.

IMPORTANT SAFETY INSTRUCTIONS

Use

Personnel operating the machine

should be trained regularly.

Children and untrained personnel must

not be allowed access to the machine

or its controls.

BURN AND SCALD HAZARD

This washer reaches very high

temperatures. Take care when

unloading the unit. Let baskets and

inserts cool before touching them. Any

water which may remain in containers

will be very hot and must be emptied

into the wash cabinet.

BURN HAZARD

The heating elements become

extremely hot during use. Do not touch

the heating elements during or directly

after the end of a program.

Take care when handling liquids

such as detergents, wetting agents

or neutralizing agents. These may

contain irritating or corrosive

ingredients. Do not use an organic

solvent in this washer, as an explosion

may occur. Wear protective gloves and

goggles. The manufacturer’s safety

conditions must be observed for all

chemical agents.

Avoid inhaling powdered

detergent. If swallowed, it can

cause burning in the mouth and throat

or inhibit breathing.

Be careful when sorting items with

sharp pointed ends. If possible,

place the pointed end downwards.

The water in the machine must not

be used as drinking water.

Do not sit or lean on the open door.

Injury or machine damage could

result.

Never use a water hose or a high

pressure hose to clean the

machine or the areas surrounding it.

Only use cleaning agents

formulated for special processes

and approved by Miele for use with this

machine. Use of unsuitable cleaning

agents could adversely affect the

components of the machine.

IMPORTANT SAFETY INSTRUCTIONS

Pre-treatments with cleaning or

disinfecting agents can create

suds, as can certain rinsing agents. For

pre-treatment and / or cleaning, only

use low-sudsing detergents and

disinfecting agents which have been

approved by Miele. Suds can have an

adverse effect on the cleaning process.

When a chemical additive is

recommended on technical

application grounds (for example, with

a cleaning agent), this does not imply

that the manufacturer of the machine

takes responsibility for the effect of the

chemical on the material of the items

being cleaned. Please be aware that

changes in formulation, storage

conditions, etc, which may not be

published by the chemical producer,

can have a negative effect on the

cleaning result.

When using cleaning agents and

specialized products, it is essential

that the manufacturer’s instructions are

followed. Only use the product for the

application described by the

manufacturer to avoid any material

damage or the occurrence of strong

chemical reactions.

The machine is designed only for

operation with water and additive

cleaning agents. Organic solvents must

not be used in the machine. An

explosion or machine corrosion could

occur with the use of organic solvents.

In critical applications where very

exact requirements must be met, it

is highly recommended that all the

relevant factors for the process, such

as cleaning agent, quality of water, etc.,

are discussed with Miele’s Application

Specialist.

The mobile units and special

inserts should only be used for

their specific applications.

Empty any containers or utensils

before arranging them in the

machine.

Do not allow any remains of acids

or solvents, particularly

hydrochloric acid or chloride solutions,

to get into the wash cabinet. The

presence of any solvents should be

minimized.

To prevent corrosion damage,

ensure that solutions or steam

containing hydrochloric acid do not

come into contact with the steel outer

casing of the machine.

IMPORTANT SAFETY INSTRUCTIONS

Accessories

Only genuine Miele parts or

accessories should be used with

the Laboratory Glassware washer. The

performance and safety of non-genuine

parts or accessories cannot be

guaranteed, and use of such parts or

items may void the machine warranty. If

you have specific questions about

machine options or accessories, please

call Miele.

Disposal of an appliance

When discarding a lab washer,

disconnect it from the power

supply, remove the door to the wash

cabinet and cut off the power cord.

For environmental and safety

reasons, ensure the machine is

completely drained of any residual

water and cleaning agent. (Observe

safety regulations and wear safety

goggles and gloves). Make appropriate

arrangements for the safe disposal of

the machine.

SAVE THESE

INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

The G 7883 is the "industry standard"

undercounter washer designed to

handle the vast majority of glassware

cleaning applications.

Description of the machine

a"On/Off" button

b"Door" button

cDisplay

d"Display" indicator

e"Drying" indicator

f"Start" indicator

g"Start" button

h"Drying" button

i"Display" button

(toggles between the elapsed

time, active wash blocks and actual

temperature displays)

j"Add liquid detergent" indicator *

k"Add rinse aid" indicator

l"Add neutralizing agent" indicator

m"Recharge Softener" indicator

n"Check fill/drain" indicator

oProgram sequence display

pProgram selector

* (only with optional DOS-Module)

G ide to the lab washer

aConnection for optional DOS-Module

bFilter combination

cSalt reservoir

(water softener)

dPowdered detergent dispenser

eRinse aid reservoir

(with dosage selector)

fRinse aid level indicators

G ide to the lab washer

Electric door lock

The machine is equipped with an

electric door lock. The door can only be

opened when the electrical supply to

the machine is turned on, and the

"On/Off" button is pressed.

To open the door

^Press the "Door" button in as far as it

will go. At the same time, grip the

handle and open the door.

After the first intake of water, the door

remains locked and cannot be opened

until the end of the program (except

during the "Rinse" and "Drain"

programs). The machine can be

programmed to open during the

"Drying" program, if desired.

Do not touch the heating elements.

They remain hot for some time after

the end of the program and can

cause burns.

To close the door

^Lift the door upwards and push it

until it clicks shut. Do not press the

release catch while shutting the door.

To cancel a program

If a program has to be canceled in an

emergency, e.g. the program has been

interrupted due to a fault, the door will

have to be opened manually.

^Turn the program selector to the

"Stop" fposition. The program is

canceled after approximately

2 seconds.

Opening and closing the door

Other manuals for G 7883

Table of contents

Popular Washer manuals by other brands

Tricity Bendix

Tricity Bendix AW 1000 W Operating & installation instructions

Panasonic

Panasonic NA-F60L5WRB operating instructions

GE WSLP1500 Dimensions and installation information

Electrolux

Electrolux EWF1284EDW Service manual

Bosch

Bosch WAN2829BSN User manual and installation instructions

LG TV2516DV3B owner's manual

LG TH2517DSAV owner's manual

VESTEL

VESTEL CMH-XL 7510 TE user manual

AEG

AEG 74335 User information

Johnson

Johnson JWF721A user manual

Beko

Beko WTE7604XLW0 owner's manual

Danby

Danby DTT100A1WDB Owner's use and care guide

Amica

Amica WA 14 Ex operating instructions

Daewoo

Daewoo DWD-F1222 instruction manual

Bosch

Bosch WAS28461AU instruction manual

Finlux

Finlux FLX108CF220 user manual

Whirlpool

Whirlpool 3LBR5132AN0 Use and care guide

Beko

Beko WKB 51231 PTMA manual