Midea B8 Series User manual

INSTRUCTION MANUAL

VACUUM CLEANER

MBC2080BS

PLEASE READ THE

MANUAL CAREFULLY

BEFORE USING AND

KEEP IT PROPERLY FOR

FUTURE USE

EN, PL, CZ, SK, HU, RU, UK, ET, LT, LV, RO, SL

O P

5 6

2**

3**

9 10

13 14 15

17 18 19

English..................................................................

Polish....................................................................

Czech................................................................

Slovakian..........................................................

Hungarian........................................................

Russian..............................................................

Ukrainian..........................................................

Estonian............................................................

Lithuanian........................................................

Latvian...............................................................

Romanian........................................................

Slovenian...........................................................

5-10

11-17

18-24

25-31

32-38

39-45

46-52

53-59

60-66

67-73

74-80

81-87

GETTING TO KNOW YOUR CLEANER

A.Main cleaner

B.Hose

C.Hose handle

D.Telescopic tube

E.Crevice nozzle

F.Upholstery brush

G.Round brush

H.3in1 tools holder

I.Pet brush

J.Parquet brush

K.Floor brush

L. Dust full indicator

M1. Power button

M2. Cord rewinder button

N. Speed control slide

O. Exhaust foam

P. Exhaust HEPA 13

Q. Front cover

R. Front cover locker

S. Bag holder

T. Textile bag

U. Inlet filer assembly

Product operation

Assembling your cleaner

Take out all components from the packaging.

1. Connect the hose to the cleaner main body, ensuring it locks into position. [1]

To release the hose: rotate the connector counterclockwise and pull it. [2]

2. Connect the hose handle to the end of the fixed tube upper end and store the

accessories on the tube. [3B]

3. Connect the tube lower end to carpet and floor nozzle. [3A]

USING YOUR CLEANER

1. Extract power cord and plug it into the power supply. Do not pull the cord

beyond the red marker. [5]

2. Adjust the telescopic tube to the desired height by moving the telescopic tube

adjuster and raise or lower the tube to the most comfortable cleaning position.

[4]

3. Select Carpet or Floor Nozzle for ideal cleaning mode for the floor type. Hard

Floor – Brushes are lowered to protect the floor.

Carpet – Brushes are raised for the deepest clean.

4. Switch the cleaner on by pressing the on/off Pedal on the cleaner main body.

[6]

5. Adjust the power level by pressing the variable power control button** or by

pushing the variable power control slider**. [7]

6. Adjust the suction regulator* to the desired level. [8]

7. Switch off at the end of use by pressing the on/off Pedal. Unplug and extract

power

cord again to wind the power cord back into the cleaner.

8. Parking and Storage - The tube can be parked for temporary storage while in

use, or

in the storage position when not in use. [9]

Accessories

To obtain the best performance and efficiency it is recommended that the

correct nozzles are used for the main cleaning operations. These nozzles are

indicated in the diagrams by the letters K.

A nozzle type K can be used to clean both carpet and hard floor.

The other nozzles are accessories for specialist cleaning tasks and are recom-

mended for occasional use only.

All accessories can be fitted to the end of the handle or the end of the telescopic

tube.

Accessory Set* – Combines several functions in one, with maximum flexibility

by the rotating body. Reach into awkward areas by rotating the body. The 3 in 1

tool can be stored neatly underneath the hose handle.

Crevice Nozzle* – For corners and hard to reach areas. [E]

Upholstery Brush* – For soft furniture and fabrics. [F]

Round Brush* – For bookshelves, frames, keyboards and other delicate areas.

To extend the brushes push the button on the body of the tool. [G]

Parquet Brush* – For parquet floors and other delicate floors. [J]

Pet Brush* - Use the nozzle on stairs or for deep cleaning on textile surfaces

and other hard to clean areas. Particularly suitable for pet hairs removal. [I]

IMPORTANT: Do not use mini turbo nozzles on rugs with long fringes, animal

hides and carpet pile deeper than 15mm. Do not keep the nozzle stationary

while brush is rotating.

CLEANER MAINTENANCE

Replacing the Dust Bag

If the bag check indicator is red please check and, if necessary, replace the bag.

1. Lift the bag door release latch to open the bag door, pull the bag holder and

pull the

pull the bag collar to remove the bag. [10,11]

2. Apply the peel and seal sticker, located on the bag collar, to the bag inlet. The

full dust

bag should be disposed of correctly and carefully. [12,13]

3. Fold a new bag as shown on the bag and fit by inserting the collar into the

bag holder.

4. Refit the bag holder and close the bag door.

WARNING: The bag door will NOT close if the dust bag and/or the bag holder

are not assembled to the cleaner. Always ensure the bag and bag holder are

present when closing the bag door.

REMEMBER: The bag check indicator may also be lit if an obstruction has

occurred. In this case refer to ‘remove A Blockage from the System.

Cleaning the Filters*

To maintain optimum performance of your cleaner, please wash the filters after

each 5 bag changes.

Cleaning the pre-motor filter:

1. Lift the bag door release latch to open the bag door and remove the bag

holder. [11]

2. Remove the pre-motor filter frame from the cleaner. [14]

3. Remove the filter sponge from the holder. [15]

4. Wash it in hand warm water, and allow it to dry thoroughly before replacing to

the cleaner. [18, 19]

TROUBLESHOOTING

In case of malfunction, please refer to the following table

If the problem still can’t be solved, please contact local service center.

SolutionProblem Possible reason

The vacuum

cleaner does

not switch on

The machine

does not work

The machine

suddenly stops

- Too much dust in the bag

- Filter is blocked

- Brush duct is blocked

- Hasn't been fully dried after washing

-The power plugs are loose on the

socket or the power socket is not live

-The switch fails to be opened

- Empty the dust bag in time

- Clean the sponge filter

- Clean the blockage

- Dry the sponge filter in cool place

after washing

- Inspect whether power plugs are

tight or not or the socket is live or not

- Press the switch button

- The dust bag is full

- The sponge filter is blocked

- Suction inlet of brush or the other

accessory is blocked

- Empty the dust bag in time

- Clean the sponge filter

- Clean the blockage

Brand

Series

Model

Midea

B8MBC2080BS

Power

Rating

Annual Energy

Power cord

Product size

800W

220-240V~50-60Hz

23.3kWh/yr (A)

Capacity 3L

460*310*255mm

Filter HEPA13

GW 9.6kg

This manual suits for next models

Table of contents

Languages:

Popular Vacuum Cleaner manuals by other brands

Bissell

Bissell LittleGreen Proheat 1425 Series user guide

Panasonic

Panasonic MC-YL637S147-AE Service manual

NEFF

NEFF N17XH10 0 Series instruction manual

LG A9 Series owner's manual

Oreck

Oreck Cordless Captura BK51700 Series user guide

Kogan

Kogan KAVACROBVWA user manual

Kränzle

Kränzle VENTOS 50 ID Use and maintenance

EVVO

EVVO Ai35 instruction manual

DeWalt

DeWalt DWH200D instruction manual

Pontec

Pontec Pondomatic Vacuum Cleaner operating instructions

Cleanmaxx

Cleanmaxx PC-P007E instruction manual

Exido

Exido 240-114 manual

RIDGID

RIDGID WD1685AU0 owner's manual

Ezviz

Ezviz RE4P manual

STG global

STG global TANVAC HDV3000 Operator's manual

Shark

Shark ROTATOR PRO COMPLETE NV550 Series manual

Factory

Factory M3340 operating manual

Shop-Vac

Shop-Vac VN92 SERIES user manual