Midea NTK15 User manual

PTC CERAMIC FAN HEATER

Model: NTK15

Instruction Manual

(Please read it carefully before use and save these

important instructions)

FEATURE

SPECIFICATION

IMPORTANT SAFEGUARDS

When using any electrical appliance, basic safety precautions should

always be followed, including the following:

1. Safety

PTC heating element works with a

Temperature around 200℃, no danger of

causing flames even if the unit falls on a

flammable surface, such as carpet, paper or

quilt. Automatic cut off the power when

raved about.

2. Energy saving

High efficiency, superior heat distribution

Achieved by heating 99% of air intake that

creates up to 5200 BTU of useable heat.

Instant heat, no need to wait and no need

to waste.

Substantially reduces your heating bills.

3. Portability

Compact size, light weight, convenient for

every locations where additional heat is

required.

4. Quality

Turbo fan motor ultra quiet in operation.

Power switch with inrush current protective

device guarantees 10,000 on/off cycles

without Malfunction.

Washable/replaceable air intake filter also

serves as air cleaner.

Model

NTK15

Voltage

230V~

Frequency

50Hz

Power consumption

1500W

1. To ensure familiarity with the controls, safety features, and

operation of your heater. Read all instructions before using.

2. To reduce hazard of injury due to electric shock.

2.1 Danger of shock exists even when the appliance is switched off.

ALWAYS unplug when not in use.

2.2 A heater should never be used under conditions where it may

be immersed, or come in contact with water. Similarly do not

plug in your heater if its surfaces are damp.

2.3 Do not insert foreign objects through the intake or discharge

grilles.

2.4 Do not operate the heater if the cord was damaged in any

manne r. Return it to an Authorized Service facility for inspection,

repairing and testing.

2.5 Close supervision is required when any appliance is used by or

near children.

2.6 Shut the power off before cleaning.

2.7 Unplug by grasping plug and pulling it from the outlet. NEVER

YANK ON CORD.

2. 8 When storing your heater, keep it in a cool, dry place.

2. 9 An electrical supply of 230 volts AC only, 50Hz is required.

Make sure that the plug is fitted in a suitable electrical supply

socket. Never use with an extension cord if the plug cannot be

fully inserted. Do not attempt to defeat this safety feature.

3. To reduce hazard of injury or property damage due to heat, fire,

or explosion:

3.1 Position your heater away from furniture or loose hanging

materials. Do not drape clothing or towels, etc. over the

heater to dry.

3.2 Keep the rear grille out from walls or drapes so as not to block

the air intake.

3.3 Use of an extension cord is not recommended. However, if it is

absolutely necessary ensure the cord is short as possible (long

cords coiled up can overheat, as well as cause tripping accidents)

and NOT USED TO SUPPLY POWER TO MORE THAN ONE

APPLIANCE AT A TIME.

3.4 Do not use in the presence of explosive or flammable vapors.

3.5 Do not run in locations when the heater will be left unattended

for long periods of time. (for example gseveral weeks in an

unoccupied summer cottage).

3.6 Use the heater on flat, dry surfaces only.

3.7 LOOSE CONNECTIONS BETWEEN THE HEATER PLUG AND THE

ELECTRICAL OUTLET MAY CAUSE THE PLUG TO OVERHEAT.

REPLACE ANY WORN ELECTRICAL RECEPTACLES PROMPTLY.

3.8 Use on 230-volt 50Hz AC power supply.

3.9 ENSURE NO OTHER APPLIANCES ARE PLUGGED INTO THE SAME

CIRCUIT AS YOUR HEATER. A CIRCUIT OVERLOAD COULD

OCCUR, RESULTING IN DIMMED LIGHTS, BLOWN FUSES,

TRIPPED CIRCUIT BREAKERS, OR FIRE HAZARD.

3.10 Route the cord so that it will not be walked on, or pinched by

furniture.

3.11 This product is intended for normal household use only.

4. AIR FILTER MUST BE USED.

SAVE THESE INSTRUCTIONS

OPERATING INSTRUCTIONS

1. Plug into any 230V, 50HZ, and AC source. (See important

safeguards section 3.3 regarding use of extension cords).

2. Your heater is equipped with a 4-position control switch.

SYMBOL

FUNCTION

OFF

SHUT OFF POWER

LOW

APPROX—1000 WATTS

HIGH

APPROX—1500 WATTS

3. Set the control switch to maximum (HIGH) for fast warm up of a

room. Once the room is comfortable, select a lower setting to

reduce electrical consumption and to prevent the room from

becoming too warm.

4. Adjust the thermostat to maximum and select the desired power

setting. Once the room is comfortable, rotate the thermostat

counterclockwise, until the heater shuts off. The thermostat will

now maintain the temperature by cycling the heater on or off.

During particularly cold weather, the low power setting may be

insufficient to satisfy the thermostat. Select a higher setting for

these periods.

5. Use the oscillation function with the switch on.

REMEMBER: Portable electric heaters are designed for spot heating,

or as a supplementary heat source. They are not intended to be

main sources of heat during the normal heating season.

CAUTION: TO PREVENT ELECTRIC SHOCK. MATCH WIDE BLADE OF

PLUG TO WIDE SLOT, FULLY INSERT.

NOTE: There may be trace of smoke or odor when unit is first

operated. Do not be alarmed, this indicates that a drop of oil fell on

the heating coil during the manufacturing process. It will quickly

evaporate, and should not re-occur.

PILOT LIGHT

The heater fan is equipped with a pilot light that glows whenever

the heater is plugged in and turned on. It will shut off if the

thermostat has cycled the fan and heating elements off. This

feature is to prevent you from being unaware that the heater is

operating and maintaining the temperature of the room. When you

do not wish the heater to control the room temperature, turn the

control switch to (OFF) and remove the plug from the electrical

outlet.

HOW TO CLEAN YOUR CERAMIC HEATER

A) Before any cleaning, make sure that

1. The Power Switch is set to OFF position.

2. Disconnect power supply at source by removing plug from power

outlet.

B) Regular Cleaning

1. To clean the enclosure, use a clean, soft and lightly wet cloth to

gently wipe off the dirt from the surface of unit. Be sure not to

wet the Ceramic Heating Element and the switches. Allow the

unit to dry completely before using it.

2. Do not use cleaning liquid or other chemicals to spray on the

unit.

3. After using the unit for a period of time, dust and other particles

in the air will collect on the air filter at the rear of the unit. Take

out the filter cover, remove the filter and rinse out in warm

water, allowed to dry completely. and reinstalled.

Air filter should be cleaned regularly.

4. Always tighten rear grill. Best is to use vacuum cleaner.

HOW TO STORE YOUR CERAMIC HEATER

1. Perform the cleaning Procedures described in How to clean

your ceramic heater.

2. Wipe all parts to dry.

3. Pack the heater in a plastic bag and store it in a dry place.

Table of contents

Popular Heater manuals by other brands

oventrop

oventrop Regucor Series quick start guide

Blaze King

Blaze King CLARITY CL2118.IPI.1 Operation & installation manual

ELMEKO

ELMEKO ML 150 Installation and operating manual

BN Thermic

BN Thermic 830T instructions

KING

KING K Series Installation, operation & maintenance instructions

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Installation instructions and owner's manual

Well Straler

Well Straler RC-16B user guide

EUROM

EUROM 333299 instruction manual

Heylo

Heylo K 170 operating instructions

Eterna

Eterna TR70W installation instructions

Clarke

Clarke GRH15 Operation & maintenance instructions

IRSAP

IRSAP The Radiator Company Ovali Fitting instructions

Empire Heating Systems

Empire Heating Systems WCC65 Installation and owner's instructions

Wetekom

Wetekom 92 86 43 Original instructions

Desa

Desa SPC170-F owner's manual

Watlow

Watlow Watrod Electric Tubular Heaters Specifications

Haverland

Haverland ECO-DRY GPS Series Instruction & installation manual

Stelpro

Stelpro ASILVC2060 Series user guide