Midea MRU14B3ASL User manual
Upright Freezer
SINGLE DOOR SERIES
MRU14B3ASL
USER MANUAL
Warning notices: Before using this product, please read this manual carefully and keep it for future reference.
The design and specifications are subject to change without prior notice for product improvement.
Consult with your dealer or manufacturer for details.
The diagram above is just for reference. Please take the appearance of the actual product as the standard.
02
EN
THANK YOU LETTER
Thank you for choosing Midea! Before using your new Midea product, please read
this manual thoroughly to ensure that you know how to operate the features and
functions that your new appliance offers in a safe way.
CONTENTS
THANK YOU LETTER ------------------------------------------- 02
SPECIFICATIONS------------------------------------------------- 03
PRODUCT OVERVIEW------------------------------------------ 04
PRODUCT INSTALLATION ------------------------------------ 05
OPERATION INSTRUCTIONS --------------------------------- 09
CLEANING AND MAINTENANCE---------------------------- 13
TROUBLESHOOTING ------------------------------------------- 15
WARRANTY ------------------------------------------------------- 17
03
EN
SPECIFICATIONS
Rated Voltage 115V
Rated Frequency 60Hz
Rated Current 1.8A
Defrost Power 280W
Refrigerant, Amount R600a, 1.76oz(50g)
Foaming Agent Cyclopentane
04
EN
PRODUCT OVERVIEW
Names of components
1Air ow outlet 4Plastic drawer
2Shelf 5Leveling feet
3Air ow inlet 6Door bin
ATTENTION
The picture above is only for reference. The actual conguration will depend on the physical
product or statement by the distributor.
05
EN
PRODUCT INSTALLATION
Install Instruction
Finding a suitable location
• This refrigerator is designed to be free standing only, and should not be
recessed or built-in.
• The refrigerator should be placed in a well-ventilated indoor place; the ground
shall be at and sturdy.
• Keep away from heat and avoid direct sunlight. Do not place the refrigerator in
moist or watery places to prevent rust or reduction of insulating effect.
Dimensions and Clearances
• Too small of a distance from adjacent items may result in the degradation
of freezing capability and increased electricity costs. Allow over 100 mm of
clearance from each adjacent wall when installing the appliance.
>100mm
>100mm
>100mm
Top View
Required space
for air circulation
>100mm
>100mm
>100mm
Providing a proper power supply
• Check your local power source. This refrigerator requires a 115 V, 60 Hz power
supply.
• Use a receptacle that accepts the grounding prong. The power cord is
equipped with a 3-prong (grounding) plug which mates with a standard
3-prong (grounding) wall outlet to minimize the possibility of electric shock
hazard from this refrigerator.
CAUTION
The freezer should always be plugged into its own individual electrical outlet which
has a voltage rating that matches the rating plate.
Never unplug your freezer by pulling on the power cord. Always grip the plug rmly
and pull straight out from the outlet.
Start to use
• The freezer shall stay for half an hour before connecting power when it is rstly
started.
• The freezer shall run 2 to 3 hours before loading fresh or frozen foods; the freezer
shall run for more than 4 hours in summer in advance considering that the ambient
temperature is high.
06
EN
Space requirement diagram (when the door is open and when the door is closed)
B
AC
D
E
135 °
Width Overall
Height Depth
Width
doors open
135o
Depth
doors open
135o
A B C D E
711 1570 750 1230 1242
Notice: All dimensions in mm
07
EN
Leveling feet
To avoid vibration, the unit must be leveled.
If required, adjust the leveling screws to compensate for the uneven oor.
The front should be slightly higher than the rear to aid in door closing.
Leveling screws can be turned easily by tipping the cabinet slightly.
Turn the leveling screws counterclockwise to raise the unit, clockwise to
lower it.
Moving the appliance
1. Remove all food from inside the appliance.
2. Pull the power plug out, insert and x it into the power plug hook at the rear or
on top of the appliance.
3. Tape parts such as shelves and the door handle to prevent from falling off
while moving the appliance.
4. Move the appliance with more than two people carefully. When transporting
the appliance over a long distance, keep the appliance upright.
5. After installing the appliance, connect the power plug into a socket out to
switch on the appliance.
Changing the light
• Any replacement or maintenance of the LED lamps is intended to be made by
the manufacturer, its service agent or similar qualied person.
Connecting the appliance
After installing the appliance, connect the power plug into a socket outlet.
ATTENTION
• After connecting the power supply cord (or plug) to the outlet, wait 2 or 3 hours before you
put food into the appliance. If you add food before the appliance has cooled completely,
your food may spoil.
Precautions before operation:
• Before making changes the refrigerator must be disconnected from power.
• Precautions should be taken to prevent any personal injury.
08
EN
Tips for energy saving
• Do not place the appliance near cookers, radiators or other heat sources. If the
ambient temperature is high, the compressor will run more frequently and for
longer, resulting in increased energy consumption.
• Ensure that there is sufcient ventilation at the base of the appliance, on the sides
of the appliance and at the back of the appliance. Never cover ventilation openings.
• Please also observe the spacing dimensions in the chapter “Installation”.
• The arrangement of drawers, shelves and racks as shown in the illustration offers the
most efcient use of energy and should therefore be retained as far as possible. All
drawers and shelves should remain in the appliance to keep the temperature stable
and save energy.
• To obtain a larger storage space (e.g. for large refrigerated/frozen goods), the
middle drawers can be removed. The top and bottom drawers and shelves should
be removed last if necessary.
• An evenly lled refrigerator/freezer compartment contributes to optimal energy
use. Therefore, avoid empty or half-empty compartments.
• Allow warm food to cool before placing it in the refrigerator/freezer. Food that has
already cooled down increases energy efciency.
• Allow frozen food to defrost in the refrigerator. The coldness of the frozen food
reduces the energy consumption in the refrigerator compartment and thus increases
the energy efciency.
• Open the door only as briey as necessary to minimise cold loss. Opening the door
briey and closing it properly reduces energy consumption.
• The door seals of your appliance must be perfectly intact so that the doors close
properly and energy consumption is not increased unnecessarily.
09
EN
OPERATION INSTRUCTIONS
Control panel
IMPORTANT: The control panel automatically locks after 30 seconds of inactivity
to prevent accidental activation. Unlock the control panel for use.
A High temperature indicator / alert
B Door open indicator / alert
C Decrease temperature button
D Increase temperature button
E Temperature display
F Quick freeze button
G Control panel lock / unlock button
H Freezer / Fridge mode button
Set Temperature
This freezer can be used as either a freezer or refrigerator (fridge) for your food
storage needs; however the default temperature setting is 0 °F (-18 °C).
• Freezer mode temperature range: 10 °F ~ -11 °F (-12 °C ~ -24 °C).
• Fridge mode temperature range: 35 °F ~ 46 °F (2 °C ~ 8 °C).
NOTES:
If the freezer is unplugged or loses power, you must wait 3 to 5 minutes before restarting it.
The freezer will not start if you attempt to restart it sooner.
If you choose to adjust the temperature setting, allow several hours for the temperature to
stabilize between adjustments.
10
EN
Lock
To manually lock or unlock the control panel for use: Press and hold for 3
seconds.
NOTE: Depending on the state of the Control Panel (locked or unlocked), the Lock icon will
either illuminate (locked) or turn off and a beep will sound.
Refrigerator/Freezer Mode
This freezer has an advanced design feature that lets you change it from a freezer
to a refrigerator. You can switch from Freezer mode to Refrigerator mode only by
using the control panel.
The Freezer / Fridge light on the control panel indicates the current mode.
1. Press and hold for 3 seconds to unlock the control panel.
2. Press and hold for 3 seconds to change modes. The panel beeps and the
indicator light changes to the mode selected.
Quick Freeze
The Quick Freeze feature lowers the temperature below the normal operating
temperature to quickly freeze foods.
1. Press and hold for 3 seconds to unlock the control panel.
2. Press to select Quick Freeze mode. The blue snowake icon illuminates.
NOTE: You can press a second time to exit quick freeze mode.
The Quick Freeze mode turns off automatically:
• After 3 hours, if the temperature falls below -13 °F (-25 °C).
• After 24 hours, if the temperature does not fall below -13 °F (-25 °C).
Temp Display (°F VS °C)
1. Press and hold for 3 seconds to unlock the control panel.
2. Press and hold or for 3 seconds to switch between Fahrenheit and
Celsius.
Return to Factory Default Settings
1. Press and hold for 3 seconds to unlock the control panel.
2. Press and buttons at the same time for 3 seconds to reset the freezer
controls to the factory default settings.
NOTE: The control panel will beep and all indicators will illuminate for 3 seconds. If the
compressor is running, it will pause for 5 minutes, and then restart.
Additional Features
High Temperature Alert
If the freezer is having trouble maintaining a cold temperature, the LED on the
control panel will illuminate and a beep will sound.
• FREEZER MODE: The interior temperature is over 18 °F (-8 °C) for 36 hours.
• FRIDGE MODE: If the interior temperature is over 59 °F (15 °C) for 36 hours.
• If the temperature returns to within normal range, the alert turns off automatically.
• Press any button on the control panel to turn off the alert.
Table of contents
Languages:
Other Midea Freezer manuals
Midea
Midea 353545 Wiring diagram
Midea
Midea MU53DSWBR1RCM User manual
Midea
Midea UR-BD100-DQ User manual
Midea
Midea UR-BD143-DQ User manual
Midea
Midea UR-BD481WE1-DT User manual
Midea
Midea WHS-185C1 User manual
Midea
Midea FF172L User manual
Midea
Midea 352276 User manual
Midea
Midea WHS-384C1 User manual
Midea
Midea FZ.411.SS User manual
Midea
Midea UR-BD240WE-ST User manual
Midea
Midea MDRC282FZ Series User manual
Midea
Midea UA-BD295-T User manual
Midea
Midea MRC09M4AWW User manual
Midea
Midea MRC05M3AWW User manual
Midea
Midea HS-377CN User manual
Midea
Midea MRU07M2AWW User manual
Midea
Midea JHSD172 User manual
Midea
Midea MRU14F6AWW User manual
Midea
Midea MRC04M3AWW User manual
