MicroVision S2120-01-USB User manual
Microvision Accessories Guide
Limited Warranty
Manufacturer warrants that this laser bar code scanner will be free of defects in material and workmanship for one (1)
year from the date of shipment. Manufacturer will, at its option, either repair, replace or refund the purchase price paid
by buyer for the defective Products. Such repair, replacement or refund shall be buyer’s sole remedy in the event of
Manufacturer’s breach of this limited warranty. Repaired or replaced parts or product may include new, reconditioned
or re-manufactured parts and equipment at Manufacturer’s option. All costs associated with shipment to Manufacturer
for warranty service, including but not limited to freight, duties, insurance and customs fees are buyer’s responsibil-
ity. Manufacturer will pay the freight costs (duties, insurance, customs and any other fees are buyer’s responsibility)
associated with the return shipment to buyer. The method of shipment will be at Manufacturer’s discretion. Repair or
replacement of any parts or equipment does not extend the period of warranty provided for herein. THIS LIMITED
WARRANTY IS MANUFACTURER’S ONLY WARRANTY. MANUFACTURER DOES NOT GIVE WARRANTIES
OF MERCHANTABILITY OR WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE. To take advantage
of this warranty, buyer should contact the seller not Manufacturer. Manufacturer does not warrant that the Product or
associated software will run error free or without interruptions. Manufacturer is not liable for loss of data, loss of prot,
cost of cover, indirect, incidental or consequential damages.
The warranty set forth herein does not cover and Manufacturer will have no obligations hereunder if any non-confor-
mance is caused in whole or in part by; accident, transportation, neglect, misuse, alteration, modication, or enhance-
ment of the products or incorporation, interfacing, attachment of any feature, program, or device to the products by a
person or entity other than Manufacturer, failure to provide a suitable installation environment, use of the products for
other than the specic purpose for which the products are designed or any use of the product not in accordance with the
User Manual or other misuse or abuse of the product.
Microvision, Inc. 6222 185th Avenue NE Redmond, WA 98052
Microvision and ROV are trademarks of Microvision, Inc. Windows and Windows Mobile are trademarks of Microsoft
Corporation. The Bluetooth word, mark, and logo are owned by the Bluetooth SIG, Inc. and any use of such marks by
Microvision, Inc., is under license.
DA0105216 Rev. E
Microvision Docking Station
The Microvision Docking Station gives you a home for your scanner when
you’re ready to download scanned bar codes from your Microvision scanner
to your host device.
Built of rugged molded plastic, the docking station can sit on your desktop
or be permanently mounted using the built-in screw holes. The docking
station is available in two models, a serial model and USB model. Both
models are compatible with standard Microvision scanners (not cordless
models).
The Microvision Universal Holster is the ideal accessory to make your
scanner portable and easy to use. The holster is easy to attach to your
belt or pocket, yet holds your scanner securely. For stationary applica-
tions, you can mount the holster on any at surface, such as a desk, wall,
or computer monitor. The convenient design can be used with or without
a cable.
Microvision Universal Holster
1. Slide the belt clip into
the grooves in the
holster until the round
button locks into place.
2. Slide the clip over your
belt or pocket.
Page 3Page 6
Page 8
Microvision Accessories
Thank you for purchasing Microvision scanner accessories. Microvision’s
complete line of accessories gives you the ultimate in exibility and con-
venience for virtually any data collection application. Microvision accesso-
ries are easy to install and easy to use.
This document gives you installation instructions for the Docking Station,
Protective Boot, and Universal Holster.
For more information about Microvision accessories go to:
www.microvision.com/barcode/products
For support go to:
www.microvision.com/barcode/support
Attach the holster to a at surface
1. Clean the surface.
2. Attach the adhesive tape to the
holster.
3. Press the holster rmly onto the
clean surface.
Remove the belt clip from your holster
1. Press the button to unlock the belt clip tab.
2. Pull the bottom of the belt clip up.
3. Slide the belt clip up and off.
Microvision Protective Boot
The Microvision Protective Boot makes your Microvision scanner even
more rugged. The boot is made of lightweight, exible Santoprene® that
protects your scanner without reducing ergonomics. The boot has a strain
relief loop for the scanner cable. You can also use the loop to attach a
lanyard. The boot is compatible with standard and Bluetooth scanners,
and the Microvision Universal Holster.
Slide the scanner into
the boot, then push it
down into the boot.
You can attach a
lanyard (not includ-
ed) here.
1. Pull the aps on the strain relief loop apart.
2. Insert the cable between the aps and connect the cable
to the scanner.
3. Release the aps.
You can connect a cable to your Microvision scanner when the scan-
ner is in the boot. The boot helps keep the cable connected.
Strain relief loop detail Connect the cable Cable connected
Page 7
Page 5Page 4
Page 2
This manual suits for next models
3
Other MicroVision Docking Station manuals
