MICROMATIC 941-094 User manual
DEDICATED TO
DRAFT QUALITY
NEW ”HOLDER”
FINGER
REPLACEMENT OF HOLDER AND
FINGER FOR TOOL NO. 941-094
HOLDER/FINGER
FOR 941-094
2 |MICRO-MATIC.COM
Fig. 1
Fig. 2
Fig. 3
FOR TOOL 941-094
HOLDER AND FINGER
Release the set screw.
Pull off the outer tube.
REPLACEMENT OF “HOLDER AND FINGER”
New ”Holder” with
new ”Finger”
Old ”Holder” with
old ”Finger”
MICRO-MATIC.COM |3
Fig. 4
Fig. 5
Fig. 6
1
2
Remove the 1st pin.
Turn the tool 180° and remove the 2nd pin.
Release the set screw.
FOR TOOL 941-094
HOLDER AND FINGER
4 |MICRO-MATIC.COM
Fig. 7
Fig. 8
Fig. 9
FOR TOOL 941-094
HOLDER AND FINGER
Pull out the handle bar.
Remove the plastic plug.
Release the set screw.
MICRO-MATIC.COM |5
Fig. 10
Fig. 11
Fig. 12
Pull out the 3rd pin.
Release the set screw for venting tap.
Release the venting tap.
FOR TOOL 941-094
HOLDER AND FINGER
6 |MICRO-MATIC.COM
Fig. 13
Fig. 14
Fig. 15
FOR TOOL 941-094
HOLDER AND FINGER
Pull out the 4th pin.
Release the set screw.
Remove the 5th pin.
MICRO-MATIC.COM |7
Fig. 16
Fig. 17
Fig. 18
Remove the old “holder with nger” from the tool.
Align the holes.
Turn the tool anti-clock wise 180°.
FOR TOOL 941-094
HOLDER AND FINGER
8 |MICRO-MATIC.COM
Fig. 19
Fig. 20
Fig. 21
FOR TOOL 941-094
HOLDER AND FINGER
Put in the new “holder with nger”.
Mount the Allen key on the “holder with nger”.
Slide-in the “holder with nger” and place it in the
square hole.
MICRO-MATIC.COM |9
Fig. 22
Fig. 23
Fig. 24
Insert the 5th pin. (xxx mm long)
(You are still having the Allen key in the “holder with
nger”).
Tighten the set screw.
Place the 4th pin. (xxx mm long).
FOR TOOL 941-094
HOLDER AND FINGER
10 |MICRO-MATIC.COM
Fig. 25
Fig. 26
Fig. 27
FOR TOOL 941-094
HOLDER AND FINGER
Tighten the set screw.
Put in the venting tap.
Place the 3rd pin.
Other MICROMATIC Brewing System manuals
