MICLON Cybertrack 100 User manual
E-Bike
Model:Cybertrack 100
Thank you for your purchase of the MICLON Cybertrack 100 E-Bike!
MICLON Cybertrack 100 fuses a traditional pedal bike with all-electric power to create a ride unlike anything else. With the MICLON Cybertrack 100
E-Bike, hills seem flattered. Your city feels smaller. Frustrating commutes become fun-filled joyrides. So charge up your new E-Bike and recharge your
love of riding.
To ensure your safety and the safety of others, please read and follow the guidelines in this user manual carefully and thoroughly before and during riding.
If you find any damage or dissatisfaction after receiving the product, you are welcome to contact us as soon as possible, and we will provide you with a
100% satisfactory solution.
Happy Riding!
The MICLOM Team
- 01 -
TABLE OF CONTENTS
Section 1. General Information ...............................3
1.1 What’s In the Box? 3
1.2 Product Overview
...........................................
4............................................
Section 2. Installation Steps .................................. 5
Section 3. Charging the Battery
...............................
11
3.1 Charging Instructions. ..................................... 11
3.2 Battery Security Lock/Removal. ....................... 13
Section 4. Riding Your E-Bike...................................13
4.1 Adjusting the Seat Height ............................. 13
4.2 How to Ride ................................................... 14
4.3 Buttons Information ....................................... 15
4.4 Display Information ....................................... 15
Section 5. Safe Riding Techniques & Tips .............15
5.1 Before Your First Ride .................................... 16
5.2 Routine Bike Inspections ................................ 16
5.3 Semi-Annual Bike Mechanic Inspections ....... 16
Section 6. Maintenance
................................................
17
6.1 Battery maintenance ...................................... 17
6.2 Cleaning .......................................................... 17
6.3 Storage
6.4 Disposal at End-of-Life
............................................................ 18
.................................... 18
Section 7. Specifications .......................................19
One-Year Limited Hardware Warranty ..................20
- 02 -
Section 1. General Information
1.1 What’s In the Box?
1×Bike frame with the rear wheel
1×Wheel
1×Saddle
2×Pedal
1×Disc brake
1×Quick release
2×Reflector
1×Rear derailleur protecting rack
1×Charger
1×Battery
6×ScrewM5*8.5
2×ScrewM5*10
5×Tool
1×User’s Manual
1×Greetingcard
1× Bike frame with the rear wheel 1× Saddle
1× Wheel
L R
2× Pedal
5× Tool 1× Rear derailleur protecting rack 6× ScrewM5*8.5
2× ScrewM5*10
2-in-1 screwdriver
1× Disc brake
1× Charger 1× Battery
1× Quick release 2× Reflector
1× Greeting card
1× Manual
- 03 -
1.2 Product Overview
E-Bike display Gear lever
Handle
Quick release
Front fork
Brake
Battery box ON/OFF switch
Charging port
Disc brake
Pedal
Saddle
Motor
Rear derailleur protecting rack
- 04 -
Section 1. General Information
Before operating your E-Bike, please read all instructions in the manual and follow the steps and descriptions carefully. This manual will guide you
through the installation, functions, operation, and proper maintenance of your MICLON Cybertrack 100 E-Bike.
Before assembling, check that all parts are complete and in good condition. If you have any questions or cannot find the information you need in the
manual, please contact [email protected]. Before contacting customer service, please have your purchase information ready as this may be
inquired.
Turn the stem of the handlebar 180 degrees so that it’s facing forward.
Fasten the 2 bolts that are already on the stem to secure the handlebar in position.
ATTENTION: Do not install the battery and start the meter before it is fully assembled.
NOTE:
180°
Step 1. Adjust the stem
●
●
●
●
- 05 -
Step 2. Install the handlebar
● Loosen the 4 bolts on the stem to remove the stem cover
● Rotate the handlebar so that it’s 90 degrees from the wheel and frame
● Put on the stem cover and tighten the 4 screws in order
Step 3. Install disc brakes for the front wheel
● Align the disc brake with the wheel
● Make sure all of the 6×Bolts M5*8.5 are inserted and the disc brake is tightened with the correct size allen wrench
90°
Loosen
screws screws installing
order
- 06 -
13
2
4
Step 4. Assemble and install the front wheel
● Take out the wheel and the quick-release skewer. Note that there are two cone springs on the quick-release skewer.
● Open the lever and unscrew the thumb nut from the quick release.
● Insert quick-release skewer with each cone spring on both sides into the wheel and pre-fasten thumb nut.
Quick-release thumb nut to be at the same end as the disc brake.
Both cone springs should point toward the wheel hub.
Keep the lever open and thread on the thumb nut a couple of turns leaving enough room for the fork dropouts.
● Lower the front fork onto the front wheel. The brake rotor should go into the brake caliper in between the brake pads and the axle should enter the fork
dropouts fully.
Check the wheel is fully seated in the dropouts.
● Hold the quick release lever in line with the axle and tighten the thumb nut until the lever can stay in parallel to the floor without being held. Use the palm
of your hand to close the lever fully without touching the brake rotor.
The quick-release lever secures the front wheel to the bike so the thumb nut must be tight enough so the closed lever has adequate clamp-
ing force and keeps the axle and wheel firmly in place.
2X Spring
each cone
spring on
both sides
- 07 -
brake rotor
go into the
brake caliper
brake caliper
Step 5. Install rear derailleur protecting rack
● Take out the 2 Bolts M5*10 from the box
● Align the rear derailleur protecting rack to the screw holes ① ② of the rear wheel, and then fasten the 2 Bolts
Step 6. Install pedal
● Look for the ‘R’ or ‘L’ labeled at the threaded end of the pedals to identify the correct side
● Hand tightens at first. The right pedal tightens clockwise. The left pedal tightens counterclockwise
● Completely tighten the pedals with a pedal wrench or an open-end wrench
When installing,
L to L,R to R
2
1
- 08 -
Step 7. Install the saddle
● Open the clamp under the seat post. Pull the seat up or push it down to adjust the height
● Close the clamp to secure the seat in place. Do not raise the saddle higher than the safety line
LR
10
9
8
7
6
5
4
3
2
1
Safety Line
- 09 -
Table of contents
Other MICLON Bicycle manuals
