Ena Heat Manual
________________________________________________________________________________
________________________________________________________________________________
Micerium S.p.A. File: manuale CHC3 (GB) v1.2.2 03-09.doc page 7 of 16
6. Connect the tool to an AC power supply that matches the power unit specifications.
Incorrect voltage supply can cause electrical shock or burns
7. Use only the supplied type of ACDC adapter. Other types than those listed may cause
severe damage to the device and short-circuits to the electrical system.
8. Emergency - Switch off the unit with the main switch and disconnect the plug from the wall
socket.
TOOL USE AND CARE:
1. Do not insert metal objects or liquids into the device.
2. Do not use equipment if switch does not turn it ON or OFF. Any equipment that cannot be
controlled with the switch is dangerous and must be repaired.
3. Disconnect plug from the power source before making any adjustments or storing the tool.
Such preventive safety measures reduce risk of starting tool accidentally.
4. Always control that the tool isn’t damaged – Before using the unit, check with attention its
efficiency and the perfect working of the safety devices and if necessary of damaged parts.
Safety devices or damaged parts must be repaired or changed by an Authorized Center of
Assistance it different indications aren’t given. Many accidents are caused by poorly
maintained tools.
5. If the device falls down, do not use it and send it to an authorized centers of assistance for
the proper functional tests
6. Have qualified people to change the tools – This electric unit is in conformity with the safety
directions in force. The repair of electric tools must be done only by authorized centers of
assistance
7. Inspect equipment, connection plug and cord periodically and replace the ACDC adapter if
they are damaged
.
MAINTENANCE:
1. Tool service must be performed only by qualified repair personnel authorized by Micerium
S.p.A. Service or maintenance performed by unqualified repair personnel are not allowed
and could result in injury.
2. When servicing an equipment, use only identical replacement parts. Follow instructions in
the Maintenance Section of the Instruction Manual. Use of unauthorized parts or failure to
follow maintenance instructions may create a risk of electrical shock or injury.
CLEANING AND DISINFECTION
The structure is of aluminium and plastic. For cleaning and disinfection is recommended to cut off
the ACDC adapter and lightly rub the surface with a cloth dampened with alcohol (do not use
acetone or other aggressive agents for plastics). Dry completely, including syringe and tips slots,
with a dry cloth, if needed.
CAUTION
Do not dip any elements into liquids, nor pour liquids into the syringe and tips slots.
Do not autoclave.
Never spray disinfectant or cleaning agent directly onto the system.
For additional safety instructions, please read any enclosed information about the general
operation of the machines.
