10. Auto Transmitting
8. Compatible remote
( buy separately)
Setting up min brightness with
other remote
1. Long press "SET" button on remote 3 seconds
untill the light is flashing one time and
indicator of dimmer is going to flashing
status.
2. Short press "SET" button on remote to set up
10 different brightness figure :
3%,5%,7%,9%,12%,17%,22%,28%,34%,40%.
3. Short press rotating button on remote to
confirm setting up or waiting 10 seconds for
confirming automatically and log out set up.
The brightness of lamp will recover previous
brightness before setting up.
1. Long press "off" button between remote
and dimmer ( like: " " or " "）untill the
light is flashing one time and indicator of
dimmer is going into flashing status.
Note： The master "OFF" button can set up
min brightness for all connected dimmers.
Dimmer can transmit signal to another one
within 30m, control distance is unlimited if
everything 30m install one dimmer.
Attention:
All dimmer should pair with one remote.
Triac
dimmer
Triac
dimmer
transmitting signal
distance 30m distance 30m
2. Short press " off " button between remote
and dimmer ( like: " " or " "）to set up
10 different brightness figure:
3%,5%,7%,9%,12%,17%,22%,28%,34%,
40%.
3. Short press any button on remote except "OFF"
to confirm setting up or waiting 10 seconds for
confirming automatically and log out set up.
The brightness of lamp will recover previous
brightness before setting up.
