Installation
1. Install the remote to the
selected place; Keep the
two screw on the same
level; Install it with arrow up.
3. Press downward and rotate
to the left to fix it.
2. Install battery(AAA
battery*2pcs), then fix it on
the base.
Dismantling: Rotate to
the right, then pluck it
down.
Made in China
1. Remote only control specified Mi-Light and MiBoxer
products; not all series can work on this remote.
2. In the using of the remote, if the indicated lamp
blinking quickly, pls change the battery in time. Pls
don’t use poor quality battery to avoid the leaking of
battery liquid to damage the remote.
3. This product is precise electronic product; don’t use it
in humid, high temperature, dust and high voltage
environment; Saving it at indoor, dry and no static
electricity environment.
4. Pls don’t use the remote on the wide-range metal or
strong electromagnetic wave area, otherwise, it will
badly affect the controlling distance.
Linking Instructions
Unlinking Instructions
Noet: If the light not blink slowly, the linking failed, Pls
switch off the light again, and follow the above steps
again.
Noet: If the light not blink quickly, the unlink failed, pls
switch off the light again, and follow the above steps to
unlink again.
1. Switch off the light, after 10 seconds switch on again.
2. When the light on, short press press " ON " 3 times
within 3 seconds.
3. The light blink 3 times slowly means the linking is
done successfully.
1. Switch off the light, after 10 seconds switch on again.
2. When the light on, short press " ON " 5 times within 3
seconds.
3. The light blinking 10 times quickly, means the
unlinking successfully.
Linking&Unlinking Attention
Remark: The light can be working after linking with the
remote.
