MF FIRE NOVA Series User manual

NOVA SERIES

REDUCED CLEARANCE KIT

OWNER’S MANUAL

Safety Notice: Please save these instructions for future reference. Please check our

website for the most up to date version of this manual. Please read this entire manual

before you install and use your new room heater. Failure to follow instructions may result

in property damage, bodily injury, or even death. Contact local building or fire officials

about restrictions and installation inspection requirements in your area. Do not install

Nova in a mobile home!

Manufactured by:

MF Fire, Inc.

3031 Washington Blvd STE G,

Baltimore, MD, USA

Report Number F20-590

The Nova Series Reduced Clearance Kit is installed to receive lower back wall clearance to

combustibles. This Owner’s Manual is intended for use as a supplement to:

- Nova and Nova Tower Owner’s Manual, or

- Nova 2 and Nova 2 Tower Owner’s Manual

If any portions of the Nova Series Reduced Clearance Kit are damaged or removed, the

stove cannot be operated unless clearance to combustibles are re-evaluated based on

guidance in the respective product Owner’s Manual. Failure to follow all clearance to

combustible requirements may result in property damage, damage, bodily injury, or even

death.

Top vent, ceiling exit

Nova, Nova Tower

Double Wall Connector Pipe

with Reduced Clearance Kit

Nova 2, Nova 2 Tower

Double Connector Pipe with

Reduced Clearance Kit

Sidewall to unit

20” (508 mm)

22” (559 mm)

Backwall to unit

7.5” (191 mm)

9” (229 mm)

Sidewall to connector

28” (711 mm)

31” (787 mm)

Backwall to connector

13” (330 mm)

12.5” (318 mm)

Your reduced clearance kit is comprised of two parts, depending on your model:

Nova Reduced Clearance Kit

(MF02-RCK)

Nova 2/Nova 2 Tower Reduced Clearance Kit

(MF03-RCK)

Nova Series Pipe Shield (0364-000-C)

Nova Reduced Clearance Air Duct (N92)

Nova 2 Reduced Clearance Air Duct (N93)

The pipe shield should be placed atop the stove, centered behind the double wall connector

pipe. It must be set back by ½” off the back of the double wall pipe. No additional securement is

needed. If the pipe shield is damaged or removed, the stove cannot be operated unless

clearance to combustibles are re-evaluated based on guidance in the respective product

Owner’s Manual. Failure to follow all clearance to combustible requirements may result

in property damage, damage, bodily injury, or even death.

The reduce clearance air duct should be hung from the two rear air duct bolts already installed

on the rear of the stove.

Other MF FIRE Indoor Fireplace manuals

MF FIRE

MF FIRE NOVA INSERT User manual

Popular Indoor Fireplace manuals by other brands

Brigantia

Brigantia 35-DVRS31N-2 User's installation, operation and maintenance manual

Nordpeis

Nordpeis Bergen Installation and user manual

Superior

Superior BCT2536TMN Installation and operation instructions

Quadra-Fire

Quadra-Fire 5100I-GD-B owner's manual

Renaissance

Renaissance RUMFORD 1000 user manual

Lacunza

Lacunza IV-800 Instruction book

Baxi

Baxi 940 Installer and owner guide

Dru

Dru Maestro 60/2 Tall RCH installation manual

Diamond Fireglass

Diamond Fireglass SS-O22 General assembly, installation, and operation instructions

HearthStone

HearthStone Windsor Bay 8830 Owner's manual and installation guide

Napoleon

Napoleon ASCENT B42 quick start guide

Enviro

Enviro E33GI owner's manual

Smeg

Smeg L30 FABE Installation & user's instructions

KEDDY

KEDDY K700 Installation instructions care and firing instructions

Godin

Godin 3451 manual

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Installation and operation instructions

Austro Flamm

Austro Flamm Heidi Back 2.0 945048 operating manual

Desa

Desa CCFPDFT Owner's operating & installation manual