Brush Height Adjustment Storage
To adjust the brush height, simply slide the height-adjusting slide located in front of the exhaust
filter (11) from Low to High (or High to Low). When not in use store the vacuum cleaner, accessories and these instructions in a dry place.
The brush height should be set to low when vacuuming most hard floors (such as linoleum, tiles or
wood) or when vacuuming short piled carpets. If using on highly polished floors you may want to set
the brush height to high so that the brushes do not scuff the polished surface.
SAFETY PROTECTION
The cleaner is fitted with a thermal cut out that protects it from overheating. Should the unit stop suddenly, there
is a chance it may have overheated. If this occurs switch off the vacuum cleaner and allow it to cool for a period
of 40 minutes before recommencing. Should the vacuum cleaner still not operate, contact the service provider
listed.
The brush height can be set to high when vacuuming long piled carpets, or when you do not want the
brush to be utilised.
Carpet / Floor Hose Assembly
For standard carpet or floor use, ensure that the Stretchable Hose is connected to the Vacuum
Cleaner as shown in the diagram on Page 2. Rest the Hose over the top of the Hose Support (14) and
attach the loose end to the Extension Tube. Slide the Extension Tube into the Bracket and push
firmly over the connection socket.
GENERAL SAFETY
Above Floor Cleaning
To use the cleaner accessories for cleaning furniture, curtains or other high areas simply remove the
hose assembly from the power head assembly and attach the desired accessory. The vacuum cleaner
is supplied with 2 extension pipes, a long crevice tool and a small brush head tool. When using electric appliances basic safety precautions should always be followed to reduce the risk of fire,
electric shock and personal injury. Read all these instructions before attempting to use the machine.
Care
Basic Operation of the Vacuum Cleaner Do not vacuum fine abrasive dust particles, lit cigarettes, embers or hot ash. Do not vacuum large objects that
may block the hose or pipes. Do not tilt the vacuum cleaner when in use. Do not drop the vacuum cleaner onto
the floor.
Plug the cord into a suitable electrical outlet ensuring the voltage is 230-240V.
To turn the vacuum cleaner ON, push the power switch (6) down.
This will start rotating the floor brush and activate the suction operation of the unit.
WARNING! The agitator (rotating floor brush) continues to rotate while the vacuum cleaner is in
the upright position. As such, avoid leaving the vacuum cleaner (when operating) in one position for
extended periods of time. Set the brush height to High when using the cleaning attachments. Consider the environment.
Do not use in damp or wet conditions. Do not use without adequate light. Do not use near flammable or
hazardous materials. Do not use outdoors. Do not leave unattended while connected to the power supply.
To turn the vacuum cleaner OFF, push the power switch (6) down again. Keep children away.
Emptying the Dust Canister. This appliance is not intended for use by young children or infirm persons without supervision. Young children
must be supervised to ensure that they do not play with it.
Ensure the vacuum cleaner is disconnected from the power supply. To empty the dust canister
simply press the release button located on the top of the dust compartment canister and pull outwards
(away from the Vacuum Cleaner). To replace simply re-insert the dust canister bottom-first and lock
into place. To remove the dust canister lid turn anti-clockwise. Remove the filters and dispose of
contents. It is recommended that the filter be cleaned when the dust canister is emptied.
Damaged or dropped.
Always inspect your appliance before use. Do not use this appliance if it has been damaged, dropped, left
outdoors or dropped in water. Return it to an authorised service dealer for examination and repair. Do not attempt
to service this appliance yourself. Refer servicing to qualified service personnel.
Filters.
The main filter on this vacuum cleaner is located inside of the dust canister (10). This filter also has
a protective cover, or secondary filter. This main filter and the filter cover can be washed in a
solution of warm water mixed with a small amount of mild detergent. Do not re-use until completely
dry. Remove the main filter and the filter cover by sliding upwards from its position inside the dust
canister.
Store in a safe place
When not in use store your vacuum cleaner and all its accessories and instruction manual in a safe and dry place.
Liability.
No liability can be accepted for any damage or personal injury caused by non-compliance with these instructions
or any other improper use or mishandling. This appliance is intended for household use only.
The other removable filter is located on the front of the unit (11), at the base. This is an exhaust filter
and should only be cleaned by brush or blown air. Remove the exhaust filter cover by pressing the
release button. Remove the filter from the filter holder and clean. Re-insert the filter and cover by
placing the bottom in first and then pressing the top of the cover, which should click back into place.
4 5
