Metrohm 830 User manual

830 IC Interface

Instuctions for Use

8.830.1003

CH-9101 Herisau/Switzerland

E-Mail [email protected]

Internet www.metrohm.com

CH-9101 Herisau/Switzerland

E-Mail [email protected]

Internet www.metrohm.com

830 IC Interface

5.830.0020 Program

Instructions for Use

8.830.1003 07.2003 / pkl

Teachware

Metrohm AG

Oberdorfstrasse 68

CH-9101 Herisau

[email protected]

1st Edition 2003

Although all the information given in these instructions has been checked with great care, errors

cannot be entirely excluded. Should you notice any mistakes please inform the author at the

address given above.

Table of contents

830 IC Interface / 8.830.1003 Instructions for Use I

Table of contents

1Introduction.................................................... 1

1.1 Instrument description ............................................................. 1

1.2 Parts and controls..................................................................... 2

1.3 Information on the Instructions for Use................................... 4

1.3.1 Organization ..................................................................................4

1.3.2 Notation and pictograms ..............................................................5

1.4 Safety notes .............................................................................. 6

2Installation ..................................................... 7

2.1 Setting up the instrument ......................................................... 7

2.1.1 Packaging......................................................................................7

2.1.2 Check.............................................................................................7

2.1.3 Location .........................................................................................7

2.1.4 Arrangement of the instruments....................................................7

2.2 Mains connection...................................................................... 8

2.2.1 Mains voltage and fuses ...............................................................8

2.2.2 Mains cable ...................................................................................8

2.2.3 Switching the instrument on/off.....................................................8

2.3 Connection to the PC................................................................ 9

2.3.1 Connecting cable ..........................................................................9

2.3.2 Software installation ......................................................................9

2.4 Connection of external instruments....................................... 10

2.4.1 General information.....................................................................10

2.4.2 819 IC Detector, 820 IC Separation Center, 818 IC Pump .........12

2.4.3 833 IC Liquid Handling Pump Unit .............................................13

2.4.4 833 IC Liquid Handling Suppressor-Unit ....................................14

2.4.5 833 IC Liquid Handling Sample Prep Unit ..................................15

2.4.6 833 IC Liquid Handling Dialysis Unit...........................................16

2.4.7 833 IC Liquid Handling Ultra Filtration Unit.................................17

2.4.8 Triathlon Autosampler .................................................................18

2.4.9 766 IC Sample Processor ...........................................................19

2.4.10 791 IC VA Detector ......................................................................20

2.4.11 761 Compact IC ..........................................................................21

2.4.12 812 IC Valve Unit and 817 Bioscan.............................................22

2.4.13 816 IC Eluent Selector.................................................................23

2.4.14 828 IC Dual Suppressor ..............................................................24

2.4.15 837 IC Combi Degasser..............................................................25

3Operation...................................................... 26

3.1 Switch instrument on/off ........................................................ 26

3.2 Settings in the "830 IC Interface" window.............................. 27

3.2.1 Event output lines ........................................................................30

4Appendix ....................................................... 34

4.1 Technical data......................................................................... 34

4.2 Scope of delivery .................................................................... 38

4.3 Optional accessories .............................................................. 39

4.4 Validation / GLP ...................................................................... 40

4.5 Warranty and Conformity ....................................................... 41

Table of contents

830 IC Interface / 8.830.1003 Instructions for Use

4.5.1 Warranty ...................................................................................... 41

4.5.2 Declaration of Conformity ........................................................... 42

4.5.3 Quality Management Principles .................................................. 43

4.6 Index ........................................................................................ 44

List of illustrations

Fig. 1: Connection possibilities at 830 IC Interface .............................................. 1

Fig. 2: Front of 830 IC Interface............................................................................ 2

Fig. 3: Rear of 830 IC Interface............................................................................. 3

Fig. 4: Connection of 830 IC Interface to PC........................................................ 9

Fig. 5: Connection of 819, 820 and 818 (MIC 1) ................................................ 12

Fig. 6: Connection of 820, 819, 818 and 833(Pump Unit) (MIC 2) ..................... 13

Fig. 7: Connection of 2×819, 820, 2×818 and 833 (Suppressor Unit) (MIC 3).. 14

Fig. 8: Connection of 833 (Sample Prep Unit) to MIC 6 for Neutralization......... 15

Fig. 9: Connection of 819, 820, 818, 833 (Suppressor Unit)

and 833 (Dialysis Unit) ............................................................................ 16

Fig. 10: Connection of 819, 820, 818, 833 (Suppressor Unit)

and 833 (Ultra Filtration Unit)................................................................... 17

Fig. 11: Connection of 819, 820, 818 and Triathlon ............................................. 18

Fig. 12: Connection of 819, 820, 818 and 766 ..................................................... 19

Fig. 13: Connection of 819, 820, 818 and 791 ..................................................... 20

Fig. 14: Connection of 819, 820, 818 and 761 ..................................................... 21

Fig. 15: Connection of 817, 812 and 818 (MIC 8) ................................................ 22

Fig. 16: Connection to 819, 820, 818 and 816 ..................................................... 23

Fig. 17: Connection to 819, 820, 2x818 and 828 (MIC 10)................................... 24

Fig. 18: Connection to 819, 820, 818 and 837 ..................................................... 25

1.1 Instrument description

1 Introduction

1.1 Instrument description

The 830 IC Interface provides the connection between the PC and ex-

ternal IC or HPLC peripheral instruments. Up to 16 instruments includ-

ing 4 detectors can be connected to the 830 IC Interface and controlled

by means of the «IC Net»PC software. The 830 IC Interface can also

record and convert the analog signals from a maximum of 4 channels

(two at once) which are processed at very high resolution.

Fig. 1 shows an overview of all the Metrohm instruments which can be

connected to the 830 IC Interface and are described in these ‘Instruc-

tions for Use’. It is also possible to connect Bischoff instruments;

please refer to the «IC Net»on-line program help as well as the relevant

Bischoff instruction manuals.

830 IC Interface

819 IC Detector

820 IC Separation Center

818 IC Pump

833 IC Liquid Handling Unit

812 IC Valve Unit

816 IC Eluent Selector

817 Bioscan

761 Compact IC

791 IC VA Detector

766/788 IC Sample Processor

828 IC Dual Suppressor

837 IC Inline Degasser

Triathlon Autosampler

Fig. 1: Connection possibilities at 830 IC Interface

830 IC Interface / 8.830.1003 Instructions for Use 1

1 Introduction

1.2 Parts and controls

In this section you will find the numbers and designations of the parts

and controls of the 830 IC Interface. The numbering applies through-

out the instructions for use, i.e. bold numbers in the text (e.g.

) refer

to the parts and controls illustrated here.

Fig. 2: Front of 830 IC Interface

1Mains pilot lamp

Lights up when instrument is switched

830 IC Interface / 8.830.1003 Instructions for Use

1.2 Parts and controls

2 3

4 5

7 8 9 10 11 12 13 14

Fig. 3: Rear of 830 IC Interface

Earthing socket

Mains switch

For switching the instrument on/off.

4Serial number

5Mains connection plug

Mains connection see section 2.2

6PC connection

RS232 interface

System 1

7Analog signal connection

8Remote input/output lines connec-

tion (RUN)

9Remote input/output lines connec-

tion (COM)

10 RS232 interfaces

System 2

11 Analog signal connection

12 Remote input/output lines connec-

tion (RUN)

13 Remote input/output lines connec-

tion (COM)

14 RS232 interfaces

830 IC Interface / 8.830.1003 Instructions for Use 3

1 Introduction

1.3 Information on the Instructions for Use

Please read through these Instructions for Use carefully before you put

the 830 IC Interface into operation. The Instructions for Use contain

information and warnings to which the user must pay attention in order

to assure safe operation of the instrument.

1.3.1 Organization

These 8.830.1003 Instructions for Use for the 830 IC Interface pro-

vide a comprehensive overview of the installation, startup procedure,

operation and technical specifications of this instrument. The Instruc-

tions for Use are organized as follows:

Section 1 Introduction

General description of instrument, parts and con-

trols and safety notes

Section 2 Installation

Mains connection, connection to PC,

connection of external instruments

Section 3 Operation

Operation via «IC Net»

Section 4 Appendix

Technical data, standard equipment, options, war-

ranty, declarations of conformity, index

To find the required information on the instruments you will find it an

advantage to use either the Table of contents or the Index at the

back.

830 IC Interface / 8.830.1003 Instructions for Use

Table of contents

Popular Recording Equipment manuals by other brands

KV2 Audio

KV2 Audio 500 Series user guide

Robotics Technologies

Robotics Technologies microBus-Cam II installation manual

Seca

Seca 460 quick start guide

Cognex

Cognex MVS-8000 Series Hardware manual

Mect

Mect MPNC006 Series user manual

Bad Caf

Bad Caf THE LEASH operating manual

Strymon

Strymon NIGHTSKY user manual

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U user manual

Tews Technologies

Tews Technologies TPMC465 user manual

Honeywell

Honeywell Excel 50 user guide

SeaLevel

SeaLevel COMM+8.LPCI user manual

Arturia

Arturia AUDIOFUSE STUDIO user manual

Rukra

Rukra RK-1240 quick start guide

Samson

Samson SCOM owner's manual

Dynacord

Dynacord DPS260 owner's manual

Nice

Nice Core user manual

Pyle Pro

Pyle Pro PSS8 manual

RF-System

RF-System TinyGate Assembly and user's manual