A CAREFUL AND KNOWLEDGABLE OPERATOR IS THE BEST INSURANCE
AGAINST AN ACCIDENT.
PERSONAL SAFETY PRECAUTIONS
QUALIFIED PERSONNEL must make all electrical connections
. (“Entela” evaluates our product for
electrical safety and conformity.)
DO NOT operate the saw before reading the entire manual and familiarizing yourself with the location,
function, and safety precautions of the machine.
NEVER allow anyone unfamiliar or untrained to operate the machine.
NEVER place any part of your body near a moving saw blade.
KEEP guards and shields in place and in good working order.
USE EXTREME CARE when making adjustments.
MACHINERY PRECAUTIONS
The caution decal is located on the front top blade cover of the machine and must remain legible. Should it
become damaged we will replace it free of charge.
CAUTION
TO AVOID POTENTIAL HAZARDS, OBSERVE THE FOLLOWING PRECAUTIONS WHEN OPERATING OR SERVICING
THIS MACHINE.
ALWAYS WEAR SAFETY GLASSES.
ALWAYS USE YOUR EMPLOYER PROVIDED SAFETY EQUIPMENT.
ALWAYS WEAR GLOVES WHEN HANDLING SAW BLADE.
ALWAYS ADJUST GUIDE POST HEIGHT TO WORKPIECE AND REMOVE LOOSE ITEMS FROM TABLE BEORE
STARTING MACHINE.
ALWAYS REPLACE BAND WHEEL COVER AND SKIRT DOOR AFTER INSTALLING NEW BLADE.
ALWAYS KEEP FINGERS AND HANDS AWAY FROM MOVING SAW BLADE AND VISE.
ALWAYS STOP MACHINE BEFORE REACHING INTO THE WORK AREA.
ALWAYS AVOID CONTACT WITH COOLANT, ESPECIALLY THE EYES.
ALWAYS USE A HOOK OR RAKE TO REMOVE DEBRIS FROM TABLE.
ALWAYS MAINTAIN PROPER BLADE GUIDE BEARING CLEARANCE.
ALWAYS BE AWARE OF PROPER BAND SPEED AND FEED PRESSURE SETTINGS.
ALWAYS USE VISE PROPERLY.
ALWAYS LOCK OUT POWER WHEN UNATTENDED.
ALWAYS DISCONNECT POWER BEFORE REMOVING COVERS TO SERVICE MACHINE.
ALWAYS REFER TO DATA CHARTS SUPPLIED BY BLADE MANUFACTURERS FOR PROPER SELECTION OF
BLADE, SPEED AND FEED FOR THE TYPE AND SIZE OF THE MATERIAL YOU ARE CUTTING.
NEVER WEAR JEWELRY OR LOOSE CLOTHING WHILE OPERATING MACHINE.
NEVER SAW UNKNOWN MATERIAL.
NEVER SAW A WELD OR A TORCH CUT EDGE.
NEVER OPERATE WITH SAFETY SHIELDS REMOVED.
NEVER ALLOW DEBRIS TO BUILD UP UNDER SAW OR IN COOLANT SUMP.
NEVER RUN THE MACHINE WITHOUT A THOROUGH UNDERSTANDING OF ITS OPERATION.
NEVER LOAD, UNLOAD STOCK OR REMOVE CUT PARTS FROM MACHINE WHILE THE BLADE IS
RUNNING.
