2
5.) Pair and Connect: After the unit is powered on
the blue light will come on and it will automatically
go into Bluetooth pairing mode. The device will get
listed as “Merlin VR Controller”. Once the pairing is
successful the indicator will turn o. Next time the
device is switched on it will automatically pair with
the last device it was connected to. If a new device is
to be paired make sure the unit is o. The press and
hold the “start” button for 8 seconds, the unit will
enter pairing mode and a new device can now be
paired.
6.) To power o the device, press and hold the “start”
button for about 5 seconds. The device will
automatically shut down after 5 minutes if no
connecting to Bluetooth is found or if there is no
activity with the unit.
7.) Key Mode:
The unit has 4 modes available in the key
conguration. Move the slide switch to “key”. When
select one of these modes:
Mode 1: Android music/Shutter, Press “Start” and
“mode 1”.
Mode 2: Android mouse/Shutter, Press “Start” and
“mode 2”.
Mode 3: iOS Shutter/Game, Press “Start” and “mode
3 ”.
Mode 4: VR Mode, Press “Start” and“triangle”.
8.) Game Function: Move the slide switch to the
“Game” position. The controller is now operated by
two hands.
Picture page 3
a.) Game mode in android.
In the menu of the app try and move joystick to
move the cursor. The “X”key in conrm and “@” key is
return. If the keys respond the device is ready for use.
Make sure to download games that have gamepad
support.
For more advanced games use the following
combinations:
Select = Start + @
L1 = Start + X
R1 = Start + triangle
Right joystick = left joystick + Start
L2 = Start + iOS + X
R2 = Start + iOS
b.) Game mode in iOS
The controller supports several games that are
compatible with “icade”. Before playing games
please ensure the keyboard is set to English
language. Some games might need some setting up.
This is done in the game’s setup menu.
Combination keys:
Select = Start + @
L1 = Start + X
R1 = Start + triangle.
9.) VR mode: This device supports VR models such as
storm magic mirror and multicast.
1. To set the VR mode press “Start” and triangle to
enter storm mode. The device will now show up in
the Bluetooth menu. Pair with the device.
2. As an example of the operation please download
the storm app (via the QR code below) and open the
storm magic mirror. The tap mirror mode selection.
The button functions for storm mode is shown in the
picture below.
3. Please remember that VR play mode is a special
mode for 3D video. If you want other functions
please use the other modes.
4. )
10. Charging: When the internal battery is low the 10.
10.) Charging: When the internal battery is low the
power led will ash (red is the default color for
power). Connect to a standard 5V USB port to
charge. The led will be on during the charging cycle.
When charging is complete the led will turn o.
Maintenance:
1.) Do not immerse this product in any liquid such as
water.
2.) Retain these instructions for future use.
3.) Clean the product with a damp cloth.
4.) Do not press buttons with force.
5.) Do not use in high temperature or high humidity.
6.) Do not apply unnecessary pressure.
