Memorex MMP8550 User manual
User’s Guide
256 MB MP3/WMA
Digital Audio Player
MMP8550
Before operating this product,
please read these instructions completely.
COPYRIGHT:
• Distributing copies of MP3, WMA with DRM or WAV tracks without permission is a
violation of international copyright laws.
SAFETY:
• Vibration experienced during walking or exercising will not affect the player. However,
dropping the player or dropping a heavy object on the player may result in damage or
sound distortion.
• Avoid spilling any liquid onto or into the player.
• Do not leave the player in a location near heat sources; in a location subject to direct
sunlight, excessive dust, sand, moisture, rain or mechanical shock; on an unlevel
surface; or in a car with the windows closed during periods of excessive heat.
ROAD SAFETY:
• Do not use headphones while driving, cycling or operating any motorized vehicle. It
may create a traffic hazard and it is illegal in some areas. It can be potentially
dangerous to play your headset at a high volume while walking, especially at pedestrian
crossings. You should exercise extreme caution or discontinue use in potentially
hazardous situations.
FCC WARNING:
• This equipment may generate or use radio frequency energy. Changes or
modifications to this equipment may cause harmful interference unless the
modifications are expressly approved in the instruction manual. The user could lose
the authority to operate this equipment if an unauthorized change or modification is
made.
PRECAUTIONS
1
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003
du Canada.
2
FCC DECLARATION
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: 1) This device may not cause interference, and 2) This
device must accept any interference received, including interference that may cause
undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Shield cable must be used with this unit to ensure
compliance with class B FCC limits.
Dear Customer:
Selecting fine audio equipment such as the unit you’ve just purchased is only the start
of your musical enjoyment. Now it’s time to consider how you can maximize the fun
and excitement your equipment offers. This manufacturer and the Electronic Industries
Association’s Consumer Electronics Group want you to get the most out of your
equipment by playing it at a safe level. One that lets the sound come through loud and
clear without annoying blaring or distortion and, most importantly, without affecting
your sensitive hearing.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher
volumes of sound. So what sounds “normal” can actually be loud and harmful to your
hearing. Guard against this by setting your equipment at a safe level BEFORE your
hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, and without
distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future.
After all, we want you listening for a lifetime.
We Want You Listening For A Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment.
Since hearing damage from loud noise is often undetectable until it is too late, this
manufacturer and the Electronic Industries Association’s Consumer Electronics Group
recommend you avoid prolonged exposure to excessive noise. This list of sound levels
is included for your protection.
3
Decibel
Level Example
30 Quiet library, soft whispers
40 Living room, refrigerator, bedroom away from traffic
50 Light traffic, normal conversation, quiet office
60 Air conditioner at 20 feet, sewing machine
70 Vacuum cleaner, hair dryer, noisy restaurant
80 Average city traffic, garbage disposals, alarm clock at two feet
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE:
90 Subway, motorcycle, truck traffic, lawn mower
100 Garbage truck, chain saw, pneumatic drill
120 Rock band concert in front of speakers, thunderclap
140 Gunshot blast, jet engine
180 Rocket launching pad
Information courtesy of the Deafness Research Foundation.
4
A
S
S
O
C
I
A
T
I
O
N
EST. 1924
E
L
E
C
T
R
O
N
I
C
I
N
D
U
S
T
R
I
E
S
EIA
We
LISTENING
For A Lifetime
Want You
LOCATION OF CONTROLS
5
1
2
3
4
5
6
8
9
7
10
1. Headphone Jack
2. Skip/Search o / n Buttons
3. Function (OFF/ON/MIX)
Switch
4. PLAY/PAUSE ®p Button
(Reverse Side of Unit)
5. USB Port
6. VOLUME +/– Buttons
7. Strap Hole (For neck/hand
strap; strap is not included)
8. LOCK Switch
9. Reset Button (Inside the
Recess Hole)
10. LED (Function) Indicator
POWER SOURCE
6
RECHARGEABLE BATTERY OPERATION
This player has a built-in Lithium Polymer rechargeable battery. It is
recommended that the battery be fully charged before using for the first time
and when the battery is low (when low, the LED indicator will blink red slowly).
In these cases, charge/recharge the battery as follows:
1. Connect your player to the USB port on your computer using the USB
cable as shown. Then the battery will charge automatically. The LED
indicator will light red when charging and will light green when fully
charged.
NOTES:
• It takes approx. three hours to charge the battery from empty to full. When
fully charged, the unit can playback for approx. 12 hours.
• When charging the battery, you can only use your computer to transfer files
to the player; the player’s other functions will be unavailable.
TO INSTALL THE "DIGITAL AUDIO PLAYER" CD SOFTWARE
For Windows ME, Windows2000 or Windows XP:
Windows will automatically detect the audio player without installing the CD software
when the USB cable is connected.
For Macintosh OSX:
Macintosh OSX will automatically detect the audio player without installing the CD
software. Do not install the software when using a Macintosh.
For Windows98SE:
The USB mass storage function will not be activated without driver installation. To
activate the USB mass storage function, please use the installation CD-Rom to install
the driver.
For Windows 98SE, if you are connecting your player to your computer for the first
time, please follow these instructions:
Procedure to Install Player Driver
1. Insert the Installation CD-Rom
into the CD Drive, then the
installation screen will appear. If
the installation screen doesn't
automatically appear, double-
click my computer then double-
click on the CD drive, then the
installation screen will appear.
Click on the Windows 98
firmware icon. Then click on the
MMP8550 icon.
INSTALL “DIGITAL AUDIO PLAYER” SOFTWARE
7
2. At the Welcome screen, click NEXT.
3. Read the License Agreement. If you accept
the terms of the License Agreement, select
and dot the circle at the left of "I accept the
terms of the license agreement". Then click
NEXT.
4. At the Setup screen, click NEXT. It is
recommended to leave the destination folder
as it is.
WINDOWS 98 DRIVER INSTALLATION
8
5. At the Program Folder screen, click NEXT. It
is recommended to leave the program folder
as it is.
6. Click "Install" to start the installation.
7. When finished, the InstallShield Wizard
Complete screen will appear. Click FINISH to
exit the Install program and complete the
Windows 98 Driver installation.
WINDOWS 98 DRIVER INSTALLATION (CONTINUED)
9
This manual suits for next models
4
Table of contents
Other Memorex MP3 Player manuals
Memorex
Memorex MMP8001 Series Quick start guide
Memorex
Memorex MMP8564 - 512 MB Digital Player User manual
Memorex
Memorex MMP3642A User manual
Memorex
Memorex MMP8590-ORG User manual
Memorex
Memorex 8564 User manual
Memorex
Memorex MMP8567 - 2 GB Digital Player User manual
Memorex
Memorex MPD8842SIL - CD / MP3 Player User manual
Memorex
Memorex MMP8568-HIT User manual
Memorex
Memorex TouchMP User manual
Memorex
Memorex NMP4101-SBS - Npower Fission SpongeBob 1 GB Digital... User manual
Memorex
Memorex MPD8400 User manual
Memorex
Memorex MMP8556 User manual
Memorex
Memorex MPD8859 User manual
Memorex
Memorex MMP8500 - Biomorph 128 MB Digital Player User manual
Memorex
Memorex MMP8565 User manual
Memorex
Memorex MMP8002 Series User manual
Memorex
Memorex MMP8565 User manual
Memorex
Memorex MMP8570A User manual
Memorex
Memorex MPD8860 - CD / MP3 Player User manual
Memorex
Memorex MPD8846 User manual
