Memorex MHD8015 User manual
User’s Guide
1.5 GB HardDisk Storage
MP3/WMA Player
MHD8015
Before operating this product,
please read these instructions completely.
SAFETY PRECAUTIONS
1
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DANGEROUS VOLTAGE:
The lightning flash with arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
ATTENTION:
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS UNIT TO RAIN OR MOISTURE.
COPYRIGHT:
• Distributing copies of MP3 or WMA with DRM tracks without permission is
a violation of international copyright laws.
SAFETY:
• Vibration experienced during walking or exercising will not affect the player.
However, dropping the player or dropping a heavy object on the player may result
in damage or sound distortion.
• Avoid spilling any liquid onto or into the player.
•Do not leave the player in a location near heat sources; in a location subject to direct
sunlight, excessive dust, sand, moisture, rain or mechanical shock; on an unlevel
surface; or in a car with the windows closed during periods of excessive heat.
ROAD SAFETY:
• Do not use headphones while driving, cycling or operating any motorized vehicle. It
may create a traffic hazard and it is illegal in some areas. It can be potentially
dangerous to play your headset at a high volume while walking, especially at
pedestrian crossings. You should exercise extreme caution or discontinue use in
potentially hazardous situations.
FCC WARNING:
• This equipment may generate or use radio frequency energy. Changes or
modifications to this equipment may cause harmful interference unless the
modifications are expressly approved in the instruction manual. The user could
lose the authority to operate this equipment if an unauthorized change or
modification is made.
PRECAUTIONS
2
3
FCC DECLARATION
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: 1) This device may not cause interference, and 2) This
device must accept any interference received, including interference that may cause
undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Shield cable must be used with this unit to ensure
compliance with class B FCC limits.
Dear Customer:
Selecting fine audio equipment such as the unit you’ve just purchased is only the start
of your musical enjoyment. Now it’s time to consider how you can maximize the fun
and excitement your equipment offers. This manufacturer and the Electronic Industries
Association’s Consumer Electronics Group want you to get the most out of your
equipment by playing it at a safe level. One that lets the sound come through loud and
clear without annoying blaring or distortion and, most importantly, without affecting
your sensitive hearing.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher
volumes of sound. So what sounds “normal” can actually be loud and harmful to your
hearing. Guard against this by setting your equipment at a safe level BEFORE your
hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, and without
distortion.
Once you have established a comfortable sound level:
•Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future.
After all, we want you listening for a lifetime.
We Want You Listening For A Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment.
Since hearing damage from loud noise is often undetectable until it is too late, this
manufacturer and the Electronic Industries Association’s Consumer Electronics Group
recommend you avoid prolonged exposure to excessive noise. This list of sound levels
is included for your protection.
4
Decibel
Level Example
30 Quiet library, soft whispers
40 Living room, refrigerator, bedroom away from traffic
50 Light traffic, normal conversation, quiet office
60 Air conditioner at 20 feet, sewing machine
70 Vacuum cleaner, hair dryer, noisy restaurant
80 Average city traffic, garbage disposals, alarm clock at two feet
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE:
90 Subway, motorcycle, truck traffic, lawn mower
100 Garbage truck, chain saw, pneumatic drill
120 Rock band concert in front of speakers, thunderclap
140 Gunshot blast, jet engine
180 Rocket launching pad
Information courtesy of the Deafness Research Foundation.
5
A
S
S
O
C
I
A
T
I
O
N
EST. 1924
E
L
E
C
T
R
O
N
I
C
I
N
D
U
S
T
R
I
E
S
EIA
We
LISTENING
For A Lifetime
Want You
LOCATION OF CONTROLS
6
2
3
4
6
5
7
1
8
9
13
14
10
11
12
1. Headphone Jack
2. FWD Button
3. REV Button
4. DC IN 5V Jack z
5. Play/Pause ®p Button
6. Skip/Search mButton
7. Stop XButton
8. Volume (+/-)/Scroll
(Up/Down) Control
9. Display
10. USB Cover and Port
11. HOLD Switch
12. Reset Button
13. (Power On/Off)/M (Main
Menu) Button
14. Skip/Search lButton
POWER SOURCES
7
AC OPERATION
To operate the unit using AC power, connect the AC adapter (included) to an AC
outlet having 120V, 60Hz AC only. Plug the small end into the DC 5V jack on the side
of the unit and connect the other end into the AC outlet. It is recommended to use
the AC adapter when possible to save battery life, particularly when transferring files.
DC5V z
RECHARGEABLE BATTERY OPERATION
This unit comes with a built-in Lithium Polymer rechargeable battery. It is
recommended that the battery be fully charged before using for the first time and
when the battery indicator at the top right becomes low.
Below are the icons which will give the rechargeable battery status:
To charge the battery with the unit on:
1. Connect to AC as described above and turn the unit on; the AC/Recharging
() indicator (at the top right side of the display) will appear and blink.
2. When the battery is fully charged, the AC/Recharging indicator ( ) will light on
and stop blinking. When you unplug the AC adapter, the Full indicator ( ) will
appear in the display.
To charge the battery with the unit off:
1. Connect to AC as described above. (To check the battery condition, unplug the
AC adapter and turn on the unit to view the battery status icon.)
NOTE: It takes approximately 3 hours to charge the battery from empty to full.
1:23
1:23
1:23
1:23
AC Charging
TO INSTALL THE "DIGITAL AUDIO PLAYER" CD SOFTWARE
For Windows ME, Windows2000 or Windows XP:
Windows will automatically detect the audio player without installing the CD software
when the USB cable is connected.
For Macintosh OSX:
Macintosh OSX will automatically detect the audio player without installing the CD
software. Do not install the software when using a Macintosh.
For Windows98SE:
The USB mass storage function will not be activated without driver installation. To
activate the USB mass storage function, please use the installation CD-Rom to install
the driver.
For Windows 98SE, if you are connecting your player to your computer for the first
time, please follow these instructions:
Procedure to Install Player Driver
1. Insert the CD-Rom into the CD
Driver; open the CD Drive window
to view files using Windows
Explorer.
2. Double click the “Software
Setup.html” icon.
DOWNLOADING AND TRANSFERRING FILES
8
3. Then click “Windows 98
Driver” in the Installation
CD Explorer.
4. Then the “Windows 98 Driver Installation Guide” Explorer will appear on the
computer screen. Follow the Installation Guide’s procedure to install the Driver to
your computer.
WINDOWS 98 DRIVER INSTALLATION (CONTINUED)
9
Table of contents
Other Memorex MP3 Player manuals
Memorex
Memorex MMP8568-HIT User manual
Memorex
Memorex MMP8570 - 512 MB Digital Player User manual
Memorex
Memorex MPD8400 User manual
Memorex
Memorex MMP3682 User manual
Memorex
Memorex MMP3774 User manual
Memorex
Memorex MMP8595 Quick start guide
Memorex
Memorex MPD8861PLL User manual
Memorex
Memorex MPD8507CP User manual
Memorex
Memorex MMP8585C - 4 GB Digital Player Quick start guide
Memorex
Memorex MMP8563 User manual
Memorex
Memorex MMP8556 User manual
Memorex
Memorex MMP3774 User manual
Memorex
Memorex MMP8570A User manual
Memorex
Memorex MMP8565 User manual
Memorex
Memorex MPD8842SIL - CD / MP3 Player User manual
Memorex
Memorex MMP8590 Quick start guide
Memorex
Memorex MHD8021 - 2 GB Digital Player User manual
Memorex
Memorex MMP8567 - 2 GB Digital Player User manual
Memorex
Memorex MMP3731 User manual
Memorex
Memorex MMP8551 User manual
