Melbourne Fire Brick D105 User manual
D105 PreCast Oven Stand Height Guide - US Page 1
D105 Stand Height Guide
Rev 3.1
D105 PreCast Oven Stand Height Guide - US Page 2
DETERMINING THE BEST HEIGHT FOR YOUR OVEN STAND
One of the most commonly asked questions that we receive from people building a Wood Fired Oven
at home is “How high should I make the stand?” It’s a good question to ask – if you build the stand
too high the shorter members of your family will find it hard to reach into the oven to get to oven
trays and the like. If you build it too low, you’ll find yourself stooping constantly to look into the oven,
to check on the crust of your pizza, or see how that roast is coming along.
Remember, the most important consideration for setting the oven stand height is LINE OF SIGHT.
You’ll spend much more time looking into the oven to check on your food than you will using oven
tools, so you want to be able to look in from a comfortable standing position.
For the purpose of this guide, we have assumed that you’ll be standing approximately 2’ from the
front of the oven stand. Please note that we have removed the granite landing from the drawings to
avoid any confusion, which is why the oven is set back from the front of the stand.
We suggest you build the oven at one of three possible heights; 36”, 40” or 44” from ground level.
We say this because if you build with 8” high concrete blocks, and pour a 4.75” suspended slab (as
we recommend in our instructions on How To Build an Oven Stand) then it’s fairly easy to build to
these heights. Note that 8” concrete cinder blocks are typically slightly less than the full 8” which is
why 4 Blocks + 4.75” of concrete can add up to 36”.
36” Stand Height: 4No. 8” blocks + 4.75” Suspended Slab
40” Stand Height: 4 and a Half 8” blocks + 4.75” Suspended Slab
44” Stand Height: 5 No. 8” blocks + 4.75” Suspended Slab
To best illustrate the line of sight, we have made three CAD models for each Stand Height;
for a 5’4” user, for a 5’9” user and lastly for a 6’3” user, to show the impact that your height will have
on your ability to see into the oven.
Use the images on the following pages to see what stand height will work best for you.
D105 PreCast Oven Stand Height Guide - US Page 3
D105 PRECUT BRICK OVEN WITH 36” HIGH STAND
Tall users of the D105 oven with a 36” stand height will find themselves bending over frequently
to look into the oven. If the primary user is tall, we recommend going higher.
D105 PreCast Oven Stand Height Guide - US Page 4
D105 PRECUT BRICK OVEN WITH 40” HIGH STAND
The 40” stand height is the sweet spot for the D105 PreCut Brick Oven. This height gives all the
users good line of sight, while not being so high that it’s awkward to reach into.
D105 PreCast Oven Stand Height Guide - US Page 5
D105 PRECUT BRICK OVEN WITH 44” HIGH STAND
The 44” stand height will suit the taller users very well, however the shorter users may find it
difficult to reach into the oven to pull out trays and the like.
Table of contents
Other Melbourne Fire Brick Oven manuals
