Megmeet MC5000 Series User manual

IO extension module user quick

reference manual

Thank you for using MC5000 series PLC of Megmeet. Before using the

PLC product, please carefully read this booklet so as to better

understand it, fully use it, and ensure safety.This user manual is to offer

you a quick guide to the design, installation, connection and

maintenance of MC5000 series IO extension module.This quick

reference manual is used for the design, installation, connection and

maintenance of the MC5000 series IO extension module. It is

convenient for users to consult the required information on the spot, as

well as the introduction of the relevant optional accessories, FAQ, etc.,

for easy reference.

This manual for the following members:

MC5000-0016ERN-T

Version 1.0

Revision date Dec 02, 2018

BOM

If you need more detailed product information, please refer to MC5000

series PLC user manual ,MStart programming software user manual

and MC5000 series PLC programming reference manual issued by our

company. Consult the supplier if necessary.

1. Appearance and parts name

1.1 Appearance and terminal of module

Figure 1-1 Appearance and terminal diagram

The IO terminal of the MC5000-0016ERN-T module is a palisade screw

terminal, which can be used when the user wires directly. PIN is defined

as follows, and the functions are shown in the following table.

Table 1-1 terminal definitions

Terminal

Single name

Terminal

Single name

Y00

CH1 output

Y01

CH2 input

Y02

CH3 output

Y03

CH4 output

Y04

CH5 output

Y05

CH6 output

Y06

CH7 output

Y07

CH8 output

Y10

CH9 output

Y11

CH10 output

Y12

CH11 output

Y13

CH12 output

Y14

CH13 output

Y15

CH14 output

Y16

CH15 output

Y17

CH16 output

COM

Common port

COM

Common port

IO terminal definition of MC5000-0016ERN-T as shown bellow

16 channels Y output Y0~Y17

Output common port: COM

2. Model specification

2.1 models and main technical indicators

Table 2-1 technical indicators

Model specification

MC5000-0016ERN-T

Appearance size (H×L×W)

102.00 X 34.20 X 103.50 （mm）

Input points

Output points

Connect terminal

Screw terminal

24V power consumption current

150mA

3. Installation

3.1 Install and fix with DIN slot

The module are installed with DIN slots 35mm wide, and the extension

modules are connected by clips. After the modules are connected to

each other, push the connection card forward to the module and lock

the module. Open the DIN clasp at the bottom of the module and attach

the bottom of the module to the DIN guide rail. Rotate the module close

to the DIN guide rail and close the DIN clasp. Carefully check whether

the DIN clasp on the module is tightly fixed with the DIN guide rail, as

shown below:

Figure 3-1 Module connection diagram

3.2 Cable connect and specification

When wiring PLC, it is recommended to use multiple copper wires and

prefabricate insulated terminals to ensure the quality of wiring. The

recommended cross-sectional area and type of wire are shown in the

following table.

Cable

Recommend

ed stripping

length

Allowed

cable

number

Matching terminal

and heat shrinkable

tube

Input single

wire(X)

0.8～1.0mm²

AWG18、20

UT1-3 or OT1-3

cold-pressing end,

Φ3 or Φ4 heat

shrinkable tube

Output

single wire

(Y)

0.8～1.0mm²

AWG18、20

Fix the machined cable head on the connection terminal of PLC with

screws. Pay attention to the correct position of the screws. The

tightening torque of the screws is between 0.5~ 0.8Nm to ensure

reliable connection without damaging the screws. The recommended

cable preparation method is shown in figure 3-2.

Figure 3-2 Cable schematic

3.3 Wiring requirements

Figure 3-3 Schematic diagram of internal wiring

Wiring precautions

When connecting the cable, avoid being tied with the power line

(high voltage line, high current) and other cables that transmit

strong interference signals. Separate the drive line and avoid

parallel running.

It is recommended to use shielded cable to improve

anti-interference capability.

4. Technical Parameters

4.1 Environmental index

PLC use environment temperature range: 0℃~ 55℃. When the

ambient temperature exceeds 55℃for a long time, choose a

place with good ventilation.

Places free from corrosion, flammable and explosive gases and

liquids.

A firm, vibration-free place.

This PLC is designed for the application of installing environment

II standard and pollution level 2.

4.2 Performance

5. Indicator definition

Table 5-1 function description table of panel indicator light

Item

Function

Troubleshooting

Lnk indicator

(yellow-green)

The extension module

is connected with the

main module

successful: ON

connection failed:

OFF

1. Check whether the

supply voltage of the

main module is normal.

2. Check whether the

expansion clasp is

clamped tightly.

3. Check whether the

baffle cover is installed

firmly.

Output

indicator

Y0~Y7

Each output point

corresponds to an

indicator light, which

is numbered in base

Item

Specification

Output channel

Output connect method

18PIN screw terminal

Output type

Digital output

Output voltage level

24V DC/220V AC

MAX. load

2A/ channel,in total 8A

ON response time

< 20ms

OFF response time

< 20ms

Isolation method

Relay isolation

Output action display

LED display

Output common

Y0~Y17/ COM

1. Warranty scope refers to the programmable controller body.

2. The warranty period is 18 months. If the product breaks down or is

damaged during normal use, our company will repair it free of charge.

3. The warranty period starts from the date the product is manufactured.

Machine code is the only basis for judging the warranty period.

Equipment without machine code shall be treated as under warranty.

4. Even within the warranty period, a maintenance fee will be charged

if:

Failure of the machine caused by failure to operate in accordance

with the user's manual.

Damage to machinery caused by fire, flood, abnormal voltage,

etc.

Damage caused when a programmable controller is used for

abnormal functions.

Self-disassemble the programmable controller.

5. The service fee shall be calculated according to the actual cost. If

there is another contract, the contract shall take precedence.

6. If you have any questions, please contact the agent or our company

directly.

SHENZHEN MEGMEET CONTROL TECHNOLOGY CO.，LTD

Add：floor 5, tower B, qinghua information port, langshan road, north

district, science and technology park, nanshan district, shenzhen

Tel：400-6662163

Fax：(+86)0755-26897197

Zip code：518067

Web：www.megmeet.com

This manual suits for next models

Other Megmeet Control Unit manuals

Megmeet

Megmeet MC5000 Series User manual

Megmeet

Megmeet MC5000 Series User manual

Megmeet

Megmeet MC5000 Series User manual

Megmeet

Megmeet MC100 Series User manual

Megmeet

Megmeet MC200-5AM User manual

Megmeet

Megmeet MC200-4AM User manual

Megmeet

Megmeet MC5000 Series User manual

Megmeet

Megmeet MC200-8AD User manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual