Megavoice Envision B Series User manual
Envision B Series User Manual 20211213.docx || © 2021 MegaVoice Ltd. || Page 1 of 44
Envision models B01 and B02
Envision B Series User Manual 20211213.docx || © 2021 MegaVoice Ltd. || Page 2 of 44
Easy Start!
To turn your MegaVoice Envision on, press and hold the power
button on the back of the player until the “Starting Up…” screen
is displayed. Once the Home Screen is displayed the tablet is
ready.
To begin use, make sure the currently selected input source is
populated with the correct folder structure and file types.
To turn the tablet off, press the power button again for about 2
seconds. The power-off dialog will appear with a confirmation
bar. Swipe to the right to shut Envision down. 1
1Envision may also be shut down or restarted from the Information Screen.
About the Screen
Your Envision includes a 10.1”, 800 x 1280 pixels, IPS touch screen.
•“Tap” works practically everywhere. “Drag” works for all sliders. “Swipe” works in the browser views. 2
•After 1 minute of inactivity, the screen will time out automatically, but the tablet is still on. 3
•If the screen is still untouched for an additional 15 minutes, and playback inactive, Envision turns itself off.
•At any time during operation, a click on the power button will turn the screen off, but the player is still on. A
second click restores the screen. 3
•If the screen is turned off during active playback, the player will remain on as long as playback continues.
2See Trackpad for behavior when A/V is active. 3Except when output is to an active A/V device.
Envision B Series User Manual 20211213.docx || © 2021 MegaVoice Ltd. || Page 3 of 44
Important Features
Power on/off
Screen on/off
Hardware
reset switch
Type-C USB
charge and
data connector
Right hand
grip
Left hand
grip
Label area
Charge LED
microSD
card reader
3.5mm Stereo
Audio Jack
Type-A USB
OTG
connector
Audio/Visual
connector
(B02 only)
Envision B Series User Manual 20211213.docx || © 2021 MegaVoice Ltd. || Page 4 of 44
Audio/Visual (A/V)
Envision model B02 provides an A/V connector for output to most A/V compliant devices
(computer monitors, TVs, etc.). Use the 2m A/V cable included, or your standard A/V cable
with the adaptor (shown at left) to attach an A/V device. 1
When an A/V device is connected, the A/V icon will appear at the top of the screen.
Tap this icon to open a menu.
The menu choices are as follows:
•A/V device (audio/video) 2
•A/V device (audio/video) + TABLET (audio) 3
•TABLET (audio/video) 4
The current setting is always the highlighted one. Tapping on any of the 3 options will
transfer audio and video output to your selection and close the menu.
1For devices that provide multiple A/V input connections, make sure it is set to use the correct A/V port.
2Minor cropping of the top edge of the display may occur with some large screen TVs or monitors.
3This option causes audio to be output to both the A/V device (if it has speakers) and to Envision’s internal
speakers concurrently. If both are working, and the sound is not good, try muting the audio from one or the other.
4This option returns full audio/video control to the tablet, terminating the A/V connection.
Envision B Series User Manual 20211213.docx || © 2021 MegaVoice Ltd. || Page 5 of 44
Trackpad
When Envision is in A/V mode (B02 only), the touch screen becomes a trackpad (or touchpad). A pointer (or
cursor) appears on the A/V device screen. Using the pointer is the method for operating the tablet while in A/V
mode.
Placing your finger on the Envision touch screen surface and moving it changes the cursor location in the same
manner. Once you lift your finger, movement ceases and the cursor remains in place.
•To select an item or toggle a setting, hover the pointer over it and tap once.
•To “drag” an item (like a slider or browser view list) double-tap it while keeping your finger on the surface and
then move in the desired direction. While dragging, the cursor will change format . As long as your finger
remains on the tablet surface, “drag” will continue to work.
•If you cannot readily see the pointer because it blends into the background of the current screen, it is possible
to force it to the center by tapping 4 times anywhere on the screen within 3 seconds.
•See some screen examples below…
Envision B Series User Manual 20211213.docx || © 2021 MegaVoice Ltd. || Page 6 of 44
In the example above, the A/V menu is open while the pointer is just below the volume adjustment icon. The volume icon is
tapped once to close the A/V menu, and a second time to select and open the volume slider control.
In the example above, if you double-tap the screen while pointing to the slider, the cursor changes format and enables you to
“grab” the slider so that it can be moved to the left or right. Once you remove your finger, the “grab” is released and the
cursor changes back to the white pointer. Or you could simply point to the area desired and double-tap. The slider control will
jump to that position.
Envision B Series User Manual 20211213.docx || © 2021 MegaVoice Ltd. || Page 7 of 44
Player Storage
Envision “B” series supports 3 types of accessible storage:
•Internal/fixed
•External/removable microSD
•External/removable Type-A/OTG
The current input device is user selectable from the Input Device Selection Screen and remains current until
changed2or removed2(external storage only) by the user. For device details and specifications, please see Input
Devices.
To connect a microSD card, insert it into the card reader slot with the brass contacts
facing away from you (with the label side up as in the illustration). Gently press the
card inwards until it locks in place. To remove1the card, use your fingernail and
gently press it in until the card releases so you can reach it.
1When removing a card, take care that it does not spring out when released!
To connect an OTG device, gently insert it into the Type-A connector next to the
microSD card reader slot. It will only fit in correctly when the side with the 2
openings is facing you (per the illustration).
2To ensure that bookmarks are saved, please return to the Home Screen before removing either device.
Envision B Series User Manual 20211213.docx || © 2021 MegaVoice Ltd. || Page 8 of 44
Player Security/USB Access
The following security settings and USB access are configured for the B01 and B02 models:
•Internal Storage: Encrypted1or Unencrypted files accessible only by USB SLS2cable
•External microSD4: Encrypted1files only accessible by USB Data or SLS2cables
•External Type-A/OTG5: Encrypted1files only NOT accessible by USB cable3
1Requires special Encryption Tool software. Contact your sales representative for details.
When encrypted files are required and unencrypted are encountered by Envision, they are skipped/ignored.
2SLS Type-C USB cables are only available from MegaVoice. Contact your sales representative for details.
3Due to internal USB limitations, when an SLS or data-only cable is connected and an OTG device is present in the
Type-A connector, the connection becomes charge-only. If, however, an OTG device is not connected at the time,
Envision will switch to computer communication mode and the Internal storage and External microSD card (if
present) will be accessible.
For access to the contents of the OTG device, please connect it directly to a computer or a connected USB hub.
Regardless of the cable type, charging also occurs while connected.
4For access to the External microSD, please make sure it is present in the microSD card reader before connecting
the USB cable.
5 Faulty or low-quality OTG devices may cause Envision to lock up when connecting them.
Envision B Series User Manual 20211213.docx || © 2021 MegaVoice Ltd. || Page 9 of 44
The Home Screen
Above: Envision is connected for charging (completed), an external audio device is connected, A/V device is connected (but not
active), the volume is being adjusted, external microSD and OTG are connected but Internal Storage is the selected input.
Charge Indication
(fully charged)
Battery
Capacity
Volume
Adjustment
Brightness
Adjustment
Go to
Image
Screen
Go to
Video
Screen
Go to
Info
Screen
Volume /
Brightness
Sliders
microSD
(connected)
Go to
Audio
Screen
Go to Input
Device Selection
Screen
Internal
Storage
(selected)
OTG
(connected)
A/V device
(B02 only /
connected)
Envision B Series User Manual 20211213.docx || © 2021 MegaVoice Ltd. || Page 10 of 44
Charge indication
When the Type-C USB charging cable is connected to the charging port on the back of the player, the battery will
charge, the charge indication icon will appear at the top of the screen and blink. The charge LED will also light up
in red on the back of the device (but does not blink). Once fully charged the screen icon stops blinking, becomes
highlighted and the LED will turn green. Both the icon and LED will persist until the cable is disconnected.
See Charging Instructions for more details.
Battery capacity
This icon always shows the current battery capacity according to the chart below:
When blinking, capacity is 5% or lower*
When not blinking, capacity is between 6% and 20% Charging is recommended when red!
Capacity is between 21% and 40%
Capacity is between 41% and 60%
Capacity is between 61% and 80%
Capacity is between 81% and 100%
*When the capacity drops below the minimum required for operation, Envision will turn itself off.
Other manuals for Envision B Series
1
This manual suits for next models
2
Table of contents
Other Megavoice Tablet manuals
Popular Tablet manuals by other brands
Laser
Laser MID-1060 Quick operation guide
MUNBYN
MUNBYN IRT09J Easy setup guide
Motorola
Motorola MC3090R - Win CE 5.0 Professional 520 MHz quick start guide
Dell
Dell Latitude ST Setup and features information
Lenovo
Lenovo IdeaTab S6000L Hardware Maintenance Manual
Venturer
Venturer WT9L11 quick start guide
