
Earbud status lights
Charging Breathing blue light
Full charge Steady blue light (Light turn off aer pull out charging cable )
Baery low Blinking blue
Basic Specificaons of Earphone
Size: 23.6×16.5×26.7mm
Weight: 4.5g
Earbuds Charging Current:55mA
Earbuds Charging me: 1 hour
Working Voltage: 3.3V~4.2V
Standby me: about 40 hours
Music Time:2~2.5 hours
Talking Time:2 hours
Bluetooth version: Bluetooth 4.2
Support Profile: HSP, HFP, A2DP, AVRCP
RF transmit: Class-2
Transmission Range (Hz): 2.40GHz ~ 2.48GHz
Transmission distance: 10m
Audio sampling accuracy: 16bits
Audio sampling rate: 44.1~48kHz
Audio encoding format: CVSD,MSBC,SBC,AAC
SNR: >95dB
Working temperature: -15℃~+60℃
Working humidity: 10%~85%( in a non-frozen state)
Earbud Speaker Specificaons
Speaker specificaons / mode: Φ6mm
Impedance: 16Ω/ TYP.
Frequency(Hz): 20Hz~20KHz
Sensivity: 93±3dB
Input Power: 2.0mW (Normal), 5mW (Maximum)
Earbud MIC Specificaons
1.MIC type: Silicon MIC
2.MIC sensivity: -42±3dB
3. SPL:130dB
Basic Specificaons of Charging Case
Size: 59.5*34.5*27.3mmWeight:27.6g
Charging Port: Micro
Charging base(Full) provide power to earphone: 1.5 mes
Charging me : 1-2hrs
Input Voltage :DC5V
Charging current:300mA
Output Voltage:DC5V
Charge the case
Charging the case by plugging in the charging cable. The case
breathing blue light when it is charging
Charge level
Your earbuds let you know when your baery level is low. Every 20
seconds you will hear“Baery low” when there is 5 minutes of
baery level.
Pairing Le & Right earphone Guide:
1. Put both earphone back to the charging case. then Pick out the
both earphone from the charging capsule;
2. Make sure both of earphone didn't connected with any devices;
3. Double click the main buon of le earphone you'll hear
"Pairing" from the le earphone. Then Hold the main buon of
le earphone for 3 seconds, You'll hear "TWS searching". While
the indicator light was flashing blue and green;
4. Double click the MFB buon of right earphone, you'll hear
" pairing"
5. Wait unl you hear "TWS Connected" from right earphone,
Pairing done.
Charging Steady green light(Case with breathing blue light)
Full charge Light turn off (Case turn off breathing light)
Pairing Blinking blue and green
Note: Your baery is designed to last life of the product. It
should only be removed by a recycling facility. And aempt to
remove or replace your baery will damage the product and void
your warranty.
Case status lights
When your case is plugged into a charge cable for charging , you
will see charging lights.