Meade LX200 CLASSIC Assembly instructions
Telescope Service
Meade LX200 “Classic” Telescopes
Bench Test Setup
I find it convenient to test LX200 components outside the telescope on a bench where
access is much easier. Refer to the Fig 1 to Fig 5 for a complete visualization of the
setup. I use a static control pad on my bench to ensure the electronics are protected. Do
not set up the components on metal.
The minimal system is shown in Fig 1 and consists of:
•Main Board
•Power Panel with 34 Conductor Ribbon Cable
•Hand Controller with cable
•RA Motor Assembly
Refer to Figs 3 and 4 for the correct orientation of the Main Board and Power Panel. The
connection of the ribbon cable in the correct orientation and with the connectors correctly
mated is critical to the operation of the system. Incorrect placement may cause damage
to the main board.
Fig 1
Fig 2
Fig 3
Fig 4
Fig 5
Other manuals for LX200 CLASSIC
5
Other Meade Telescope manuals
Meade
Meade LXD 75 Manual
Meade
Meade LX-90 User manual
Meade
Meade RCX400TM User manual
Meade
Meade NG User manual
Meade
Meade LX50 User manual
Meade
Meade 2120 User manual
Meade
Meade 229 User manual
Meade
Meade Starfinder Reflecting Telescope User manual
Meade
Meade 90AZ-ADRB User manual
Meade
Meade LX850 User manual
Meade
Meade 60EQ-A User manual
Meade
Meade 81005 Condor User manual
Meade
Meade Infinity 76 User manual
Meade
Meade ECLIPSE VIEW 60 User manual
Meade
Meade 2045 User manual
Meade
Meade 50AZ-P User manual
Meade
Meade 114EQ-ASTR User manual
Meade
Meade 4400 User manual
Meade
Meade DS-2000 Series User manual
Meade
Meade 70AZ-TR User manual
