Mazda CX-30 User manual
1
4
43
44
Quick GuideQuick Guide
This Quick Guide is provided as a simple explanation of how to operate some of the
features equipped on your MAZDA CX-30.
Essential Safety Equipment
Before Driving
When Driving
Interior Features
Maintenance and Care
The meaning for each of the symbols used in the Quick Guide is as follows:
Detailed explanation pertaining to some information.
If Trouble Arises
For more information regarding the following sections, refer to the main owner's manual.
The content described in the quick guide may differ depending on the vehicle grade and
specification.
10
45
Essential Safety Equipment
1
1. Moving the steering wheel and seat to their default positions.
2. Adjusting the seatback angle.
3. Adjusting the seat position forward and back.
4. Adjusting the seat height.
5. Adjusting the height on the front edge of the seat bottom.
6. Adjusting the steering wheel position.
7. Adjusting the head restraint position.
Seat Operation
The adjustments for the driving position recommended by Mazda are done using
the following procedures.
Adjusting the Driver's Seat
Seat Slide
Height Adjustment
Seat Recline
Height Adjustment for Front
Edge of Seat Bottom
Lumbar Support Adjustment
Lower the lever, move the steering
wheel to the lowest position, and then
push it down and all the way back.
How to move the steering wheel to
its default position
Before making adjustments to the driving position recommended by Mazda
1. Slide the seat all the way back.
2. Lower the seat to its lowest
height.
3. Lower the front edge of the seat
bottom to its lowest height.
4. Sit squarely in the seat and rest
your back against the seatback.
How to move a driver’s seat to
its default position
Power operation
For details, refer to Section 2, “Seats”.
Essential Safety Equipment
Adjust the seatback to the angle providing a comfortable seated posture.
Adjust the seat to the position best for operating the accelerator and brake pedals.
Seat adjustment procedure for the driving position recommended by Mazda
Adjusting the seatback angle (reclining)
Adjusting the seat position forward and back (sliding)
With your posture slightly slouched,
move the seatback forward to the angle
where your waist feels slightly cramped.
Move the seatback backward to a
comfortable seated posture without any
feeling of cramping in your waist.
Place your left foot on the footrest, your
right foot between the accelerator and
brake pedals. With your heel set on the
floor, set your right foot on the brake
pedal and move the seat forward as far
as possible until you feel a slight
cramping in your ankle.
With your right foot set on the brake
pedal, move the seat back until you
no longer feel cramping in your
ankle. For the details, refer to the
owner’s manual.
Seat Operation
For details, refer to Section 2, “Seats”.
2
Essential Safety Equipment
For details, refer to Section 2, “Seats”. 3
Seat Operation
Adjust the seat height to a position where you have a clear forward view and you
can drive the vehicle easily.
Adjusting the seat height
With your back resting against the
seatback, raise the seat to the height
where you can see the rear edge area
of the bonnet surface from the
windscreen.
Adjust the height on the front edge of the seat bottom to the position where
the back of your knees contacts the front edge of the seat bottom.
Adjusting the height on the front edge of the seat bottom
With your right foot set on the
accelerator pedal, adjust the height on
the front edge of the seat bottom so that
the back of your knees lightly contacts
the front edge of the seat bottom.
Depress the accelerator pedal and make
sure that you no longer feel cramping
in the back of your knees.
Adjusting the steering wheel position
Adjust the steering wheel to the position where it can be operated easily and the
gauges can be viewed easily.
Before Driving
Seat Operation
For details, refer to Section 2, “Seats”, refer to Section 3, “Keys” or “Doors and Locks”.
4
Operational Range
Advanced Keyless Entry System
The advanced keyless system operates only when the driver is in the vehicle or
within operational range while the key is being carried.
The advanced keyless function allows you to lock/unlock the door, liftgate, and
fuel-filler flap, or open the liftgate while carrying the key.
Adjusting the head restraint position
Adjust the head restraint so that the centre is even with the top of the passenger's
ears.
Exterior aerial
80 cm (31 in)
Operational range
Lock/Unlock Opening the Liftgate
Before Driving
Fuel Requirements and Capacities
Premium unleaded fuel
(Conforming to EN 228 and
within E10)*1
*1 Europe
Fuel
Research Octane Number
Capacity
95 or above
SKYACTIV-G 2.0, SKYACTIV-X 2.0
The vehicle will operate efficiently on diesel fuel with
specification EN590 or the equivalent.
When refuelling, always add at least 10 L (2.6 US gal, 2.2 Imp gal) of fuel.
Fuel Capacity
SKYACTIV-D 1.8
51.0 L (13.5 US gal, 11.2 Imp gal)
AWD:
48.0 L (12.7 US gal, 10.6 Imp gal)
2WD:
51.0 L (13.5 US gal, 11.2 Imp gal)
AWD:
48.0 L (12.7 US gal, 10.6 Imp gal)
2WD:
By touching the sensing area of the touch sensor, various locking/unlocking
operations can be done without taking the key out of a bag or pocket.
Locking, Unlocking with Touch Sensor, Door Handle
Locking Unlocking
When locking/unlocking with the transmitter carried, securely touch the sensing
area of the touch sensor as follows.
5
For details, refer to Section 3, “Doors and Locks” or “Fuel and Emission”.
Before Driving
6
Refuelling
1. Using the following, unlock the driver’s door.
• Transmitter
• Touch sensor
• Door-lock switch
• Auto lock/unlock function
Fuel-Filler Flap and Cap
2. Press the location shown in the illustration and
open the fuel flap.
3. To remove the fuel-filler cap, turn it
anticlockwise.
4. Attach the removed cap to the inner side of the
fuel-filler flap.
5. Insert the refuelling nozzle all the way and
begin refuelling. Pull out the refuelling nozzle
after the refuelling stops automatically.
6. To close the fuel-filler cap, turn it clockwise
until a click is heard.
7. To close, press the fuel-filler flap until a click
sound is heard.
8. Make sure to lock all the doors when leaving
the vehicle.
Before refuelling, close all the doors, windows, and the liftgate, and switch the
ignition OFF.
Fuel-filler flap
Fuel-filler cap
For details, refer to Section 3, “Fuel and Emission”.
Before Driving
7
Power Liftgate
The power liftgate opens/closes electrically by operating the switches in the
vehicle or the buttons on the keyless entry system transmitter.
Press the power liftgate switch for
about 1 second or longer while the
liftgate is in the fully closed/open
position. The hazard warning lights
flash twice and the liftgate opens/closes
fully after a sound is activated.
Operation using the transmitter
When the power liftgate button on the transmitter is pressed and held for about 1
second or longer with all of the following conditions met, the hazard warning lights
flash 2 times, a beep sound is activated, and the liftgate automatically opens/closes
fully.
• The ignition is switched OFF.
• The vehicle is stopped.
Operation from outside (To close)
Press the power liftgate close switch while the liftgate is fully opened. The
hazard warning lights flash twice and the liftgate closes automatically after
the beep sound is heard.
(With the advanced keyless function) (Without the advanced keyless
function)
Operation from the driver's seat
(To open/close)
For details, refer to Section 3, “Doors and Locks”.
Before Driving
8
Outside Mirrors
1. Press the select switch for the outside
mirror to be adjusted to turn on the
indicator light.
To adjust:
2. Press the adjustment switch to adjust the
angle of the outside mirror.
Indicator light
Select switch
Adjustment switch
Automatic folding function
When the ignition is switched to OFF, the outside
mirrors automatically fold in and out when the
doors are locked and unlocked.
Also, when the ignition is switched ON or the
engine is started, the outside mirrors fold out
automatically.
The ignition must be switched to ACC or ON position.
For details, refer to Section 3, “Mirrors”.
Before Driving
9
Operation of the Power Windows
The window opens while the switch is pressed and it closes while the switch is
pulled up with the ignition switched ON.
Rearview Mirror
Rearview mirror adjustment
Auto-dimming mirror
Front passenger's window
switch/Rear window switches
Before driving, adjust the rearview
mirror to centre on the scene through the
rear window.
The auto-dimming mirror automatically reduces the glare of headlights from
vehicles at the rear when the ignition is switched ON.
Close
Open
Front passenger's
window
Right rear window
Power window lock
switch
Left rear window
Driver's window
Locked position
Unlocked position
Close
Open
Master control switches
For details, refer to Section 3, “Mirrors” or “Windows”.
Other manuals for CX-30
1
Table of contents
Other Mazda Automobile manuals
Mazda
Mazda MX-5 Miata Assembly instructions
Mazda
Mazda Mazda 6 User manual
Mazda
Mazda Mazda6 2011 User manual
Mazda
Mazda 2014 2 User manual
Mazda
Mazda Millenia Assembly instructions
Mazda
Mazda 2008 MX-5 Miata User manual
Mazda
Mazda Mazda6 2011 User manual
Mazda
Mazda 2008 Tribute User manual
Mazda
Mazda RX-8 Assembly instructions
Mazda
Mazda 121 1991 Instruction manual
Mazda
Mazda CX-7i User manual
Mazda
Mazda 2007 MazdaSpeed6 User manual
Mazda
Mazda CX-7 Navigation System User manual
Mazda
Mazda MX-5 Miata User manual
Mazda
Mazda B-Series Truck Assembly instructions
Mazda
Mazda 2012 MX-5 Miata User manual
Mazda
Mazda 3-sport 2016 User manual
Mazda
Mazda MX-5 Miata User manual
Mazda
Mazda 2012 3 User manual
Mazda
Mazda 2006 Tribute Assembly instructions
