Maxtor Built in Digital Video Recorder User manual
VER1.0
4Channel Built in DVR
1
INSTALLATION & SAFEGUARDS
All the safety and operating instructions should be read before the unit is operated.
Environment Condition for Installation
- To prevent electric shock or other hazard, do not expose units to rain, moisture, or dust.
- This unit should be located in an area with low humidity and a minimum of dust..
- Place this unit in a well-ventilated place and do not place heat-generating objects on this unit.
- This unit should not be located in an area where it is likely to be subjected to mechanical shocks.
Before You Start
- Ensure the power switch is in the OFF position prior to starting.
- Do not attempt to service this unit yourself as opening or removing covers may expose you to
dangerous voltage or other hazards.
- Installation should be performed by qualified service personnel only.
- This unit should be operated only from the type of power source indicated on the manufacturer’s
label and with the power supply included with the unit.
Notice
- Be aware thoroughly about the power connection before installation of the unit.
(Please read Instruction for DC Power Adapter which is included in the package)
- Before initial configuration or operation you must first set the TIME/DATE, followed by
setting the unit to the FACTORY DEFAULT settings, lastly clearing the HDD. Please follow
these steps in order.
- Before installing a second HDD, ensure that the drive conforms to the specifications
listed on the specifications page at the end of this manual. When installing a second HDD,
set the drive to SLAVE. After installation, first reset the TIME/DATE, followed by resetting
the unit to the FACTORY DEFAULT settings, lastly clearing the new HDD.
- Pull the unit out of record mode prior to cutting power to the unit. Do this by entering the
setup menu, followed by switching the unit off. Powering off the unit while writing to the
disks can cause critical malfunctions. (ex: Recording Error, Playback Error, System Error)
- When you set the record type, you have to set the Record Configuration and also
Schedule Setup. This unit records as per the Record type & Schedule setup.
- The [REC] button on the front panel is for emergency record using highest image quality.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the
user of this equipment that there are dangerous voltages within the enclosure which may be of
sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to presence of
important operating and maintenance(Servicing) instructions in the literature accompanying the
appliance.
Installation & Safeguards
2
Contents
Contents
CHAP. 1 Features & Package Contents ---------------------------------------------------------------- 4
1-1. Features ---------------------------------------------------------------- 4
1-2. Package Contents ---------------------------------------------------------------- 5
CHAP. 2 Function of Each Button ---------------------------------------------------------------- 6
2-1. Front ---------------------------------------------------------------- 6
2-2. Rear ---------------------------------------------------------------- 7
CHAP. 3 Installation ---------------------------------------------------------------- 8
3-1. Installation Configuration ---------------------------------------------------------------- 8
3-2. Detailed Installation ---------------------------------------------------------------- 9
1) Connector cover bracket ---------------------------------------------------------------- 9
2) Camera ---------------------------------------------------------------- 10
3) Monitor ---------------------------------------------------------------- 10
4) Power ---------------------------------------------------------------- 10
5) VCR, Video Printer ---------------------------------------------------------------- 11
6) Other External Device ---------------------------------------------------------------- 11
7) Connector Pin Assignment ---------------------------------------------------------------- 12
8) RS-232C ASCII-code ---------------------------------------------------------------- 12
CHAP. 4 Operation ---------------------------------------------------------------- 13
4-1. System Log-in ---------------------------------------------------------------- 13
4-2. Factory Default ---------------------------------------------------------------- 13
4-3. Display Configuration ---------------------------------------------------------------- 14
4) Freeze View ---------------------------------------------------------------- 15
5) Zoom View ---------------------------------------------------------------- 15
4-5. Record ---------------------------------------------------------------- 16
4-6. Playback ---------------------------------------------------------------- 16
4-4. Live View Setup ---------------------------------------------------------------- 14
1) Full / Multiple View ---------------------------------------------------------------- 14
2) Sequencing Cameras ---------------------------------------------------------------- 15
3) PIP View ---------------------------------------------------------------- 15
4-7. Search ---------------------------------------------------------------- 17
3
Contents
4-8. PTZ Camera Operation ---------------------------------------------------------------- 18
4-9. Data Back-Up ---------------------------------------------------------------- 18
CHAP. 5 Set Up ---------------------------------------------------------------- 19
5-1. Entering the Menu ---------------------------------------------------------------- 19
5-2. Display Setup ---------------------------------------------------------------- 20
1) Screen Display ---------------------------------------------------------------- 20
2) Monitor Setup ---------------------------------------------------------------- 20
5-3. Configuration ---------------------------------------------------------------- 21
1. HDD Management ---------------------------------------------------------------- 21
2. TIME/DATE Setup ---------------------------------------------------------------- 22
3. Camera Setup ---------------------------------------------------------------- 22
4. Interval Setup ---------------------------------------------------------------- 24
5. Alarm Setup ---------------------------------------------------------------- 24
6. Buzzer Setup ---------------------------------------------------------------- 25
7. Password Setup ---------------------------------------------------------------- 25
8. System Information ---------------------------------------------------------------- 25
5-4. Record Setup ---------------------------------------------------------------- 26
1. Record Configuration ---------------------------------------------------------------- 26
2. Schedule Setup ---------------------------------------------------------------- 27
3. Holiday Setup ---------------------------------------------------------------- 27
5-5. Back-Up ---------------------------------------------------------------- 28
5-6. External Device ---------------------------------------------------------------- 28
1. TCP/IP Setup ---------------------------------------------------------------- 29
2. RS-232C Setup ---------------------------------------------------------------- 29
6-1. DVR Network Configuration ---------------------------------------------------------------- 31
6-2.
6-3.
6-4.
Remote Viewer Program
Back-Up CD Player
FAQ
----------------------------------------------------------------
----------------------------------------------------------------
----------------------------------------------------------------
38
43
45
CHAP. 7 Specifications ---------------------------------------------------------------- 48
3. Pan Tilt Zoom Setup ---------------------------------------------------------------- 29
5-7. FACTORY Default ---------------------------------------------------------------- 30
5-8. Language Setup ---------------------------------------------------------------- 30
CHAP. 6 Network Setup ---------------------------------------------------------------- 31
4
Live View
Real time display per camera
Auto Sequence
PIP (Picture in picture)
Digital Zoom
Display Freeze
Simple Playback mode
Simple PTZ camera control
Record
Variable Record resolution (For higher picture quality or higher recording speed)
Efficient Image Quality setup in 5 steps
Schedule Record / Holiday Record
Event Record (Alarm / Motion)
Network
View Live and Playback images across IP network
Copy images across the network
Playback
Search & Playback by Date/Time, Event and Camera
Outstanding picture quality by JPEG 2000 compression algorithm (No mosaic effect)
Suitable for recording not only images but also text
Various steps in Forward Playback Speed (X1/16, X1/8, X1/4, X1/2, X2, X4, X16, X32, X64)
Various steps in Backward Playback Speed (X1/16, X1/8, X1/4, X1/2, X2, X4, X16, X32, X64)
Easy and convenient search by Remote Controller
Data Back-Up
Simple Back-Up using built-in CD Writer (Back-up CD Player included in the package)
Network Back-Up using Remote Viewer program(Remote Viewer included in the package)
Supports bigger capacity of HDD (300GB or bigger)
Others
Multi-Language (English, Spanish, German, French, Italy, Japan, China)
Lock the system by Password
PAL/NTSC Auto detection
Control the unit by using Remote Controller
CHAP. 1 Features & Package Contents
CHAP. 1 Features & Package Contents
1-1. Features
5
CHAP. 1 Features & Package Contents
1-2. Package Contents
1. Built In DVR Main Unit 2. Remote Controller
3. Power Cable
4. Power Adapter 5. User’s Manual
6. Software CD
7. Battery for remote controller
9. Bolts and Wall
Mount Bracket
Package Contents Description
1. DVR Main Unit STAND-ALONE DIGITAL VIDEO RECORDER
2. Remote Controller DVR control
3. Power Cable AC power supply to adapters for 12 V DC power
4. Power Adapter 12 V DC power supply
5. User’s Manual User’s Manual
6. Software CD Remote Viewer Software & Back up CD player
7. Battery Battery for Remote Controller
8. Connector cover Cable connector cover
Wall mount bracket9. Wall mount bracket /
Bolts For fixing Wall Mount bracket to SET (4ea)
8. Connector cover bracket
6
Name Function
①Camera selection Pressing this button will display a full screen image of that camera
STOP Playback stop and return to Schedule Record from
Emergency Record.
PLAY Playback of recorded data on HDD
Search recorded data on HDD (Press the button at 2 second)
Set up for SYSTEM MENU or Use to exit the menu
Press MENU button before powering off the unit
Selects each menu option
Move to next step
Navigate in the menu
Reduce or increase the option value in the menu
SEARCH
MENU
ENTER
NEXT
▲▼◀▶
+ -
③SETUP
②Record /
Playback
CHAP. 2 Function of Each Button
2-1 FRONT
CHAP. 2 Function of Each Button
①
①②
②③
③④
④⑤
⑤⑥
⑥
IR receiver⑤IR
Displays full screen images in sequence
(Press the button at 2 second)
SEQ
④LIVE View
Control
Shows status of operation
Display in PIP (Picture in Picture) modePIP
Switch to split display (Press the button at 2 second)
MODE button changes screen-division from (to) full screen to
(from) 16-split screen.
MODE
Freezing an imageFRZ
Zooming an imageZOOM
On/Off for PAN/TILT/ZOOM control mode
Press this button first to control PTZ camera connected to
DVR unit via RS-485
PTZ
⑥LED Lamps
7
Name Function
RS 485 Connection with PTZ Camera or other external device using RS 485 interface1
2
3
4
5
6
7
8
SENSOR Input
ETHERNET
RS-232C
CAMERA Input
LOOP Output
MONITOR Output
RELAY Output Relay out terminal
Sensor input terminal
Connection to ETHERNET device
Connection to external device as PC using RS-232C to control the DVR
Connection with camera
Camera loop out
Connection with Composite Monitor
VCR Output Connection with VCR for analog backup
DC Power DC 12V 6.6A Adaptor (Refer to the Instruction for adapter by HDDs capacity)
To avoid accidental deletion of HDD data, please make sure to press
MENU button before powering off the unit.
This takes the unit out of record mode for safe shutdown
CHAP. 2 Function of Each Button
2-2. REAR
③
③
①
①②
②⑤
⑤⑦
⑦⑧
⑧
④
④⑥
⑥
8
3-1. Installation Configuration
CHAP. 3 Installation
CHAP.3 Installation
9
1) Connector cover bracket
CHAP. 3 Installation
3-2. Detailed Installation
Table of contents
Other Maxtor DVR manuals
Maxtor
Maxtor 773W V1.0 User manual
Maxtor
Maxtor AVE MVDR-5000 User manual
Maxtor
Maxtor pmn User manual
Maxtor
Maxtor Standalone DVR 2007 User manual
Maxtor
Maxtor 777 W V1.0 User manual
Maxtor
Maxtor 16 Channel Digital Video Recorder User manual
Maxtor
Maxtor SSA-0412 User manual
Maxtor
Maxtor 4 CH Digital Multiplex Recorder User manual
Maxtor
Maxtor 4Channel Stand-alone DVMR User manual
Maxtor
Maxtor Digital Video Recorder CBC V 0.4 User manual
