Matrix IC3 User manual
CAUTION !
Read all precautions and instructions in this manual before using this equipment. Keep this manual
for future reference.
Improper assembly, maintenance or use can void the warranty terms.
Version 1.0 2013 IC-MXIC3B-01 Copyright by Indoorcycling Group GmbH 2013 | www.indoorcycling.com ENG 1
Matrix IC3
model no.:
IC-MXIC3B-01
Manufactured by:
Indoorcycling Group GmbH
Happurger Str. 86
90482 Nuremberg | Germany
www.indoorcycling.com
MATRIX Fitness Systems Corp.
1610 Landmark Drive
Cottage Grove, WI 53527
Toll-free: 866.693.4863
Local: 608.839.8686
ENG ESP
TABLE OF CONTENTS
Important precautions page 3
Before you begin page 4
How to assemble the Matrix IC3 Indoor Cycle page 5-7
How to operate page 12
Initial install checks page 8
How to adjust the Matrix IC3 Indoor Cycle page 9-11
Resistance adjustment page 12
How to move the Matrix IC3 Indoor Cycle page 12
Preventative maintenance page 13
Daily maintenance page 13
Weekly maintenance page 13
Bi-Weekly maintenance page 14-15
Monthly maintenance page 15-16
Maintenance activity plan & check lists page 17-18
Exploded drawings of structural components page 19-23
Spare part reference list page 24-28
Limited warranty page 29
The Matrix IC3 Bike is, according to EN 957, a Class S product for professional
and / or commercial use. Such training equipment is intended for use in training areas
Foot print: 52 x 120 cm / 20.5 x 47.2 inch
Weight of bike: 57kg / 126,66 lbs
Max saddle height: 115 cm / 45.3 in
Max handlebar height: 115 cm / 45.3 in
Max user weight: 130 kg / 287 lbs
The bike is designed to accommodate most users from 150 to 205 cm / 59.1 to 81.7 in
in body height.
Version 1.0 2013 IC-MXIC3B-01 Copyright by Indoorcycling Group GmbH 2013 | www.indoorcycling.com ENG 2
IMPORTANT PRECAUTIONS
WARNING!
To reduce the risk of serious injury, read the following important precautions and information before
operating the Matrix IC3 Indoor Cycle.
It is the responsibility of the owner to ensure that all users of the Matrix IC3 Indoor Cycle are
informed of all warnings and precautions.
Operate and maintain the Matrix IC3 Indoor Cycle only as described in this manual.
Do not operate the Matrix IC3 Indoor Cycle until it is properly assembled (see page 5-7).
Keep the bike indoors, away from moisture and dust. Do not place the Matrix IC3 Indoor Cycle in
a garage or covered patio or near water.
place a mat beneath the Matrix IC3 Indoor Cycle. Make sure that there is adequate room around
the Matrix IC3 Indoor Cycle to mount, dismount, and operate it.
Regularly inspect and properly tighten all parts of the Matrix IC3 Indoor Cycle as recommended
in this manual. Please replace defective parts immediately, and do not use the bike until repair is
performed. Use only original parts from the manufacturer.
Children under the age of 14 should only be allowed use of the Matrix IC3 Indoor Cycle with
parental consent and guidance by a specially trained instructor.
The Matrix IC3 Indoor Cycle should not be used by persons weighing more than 290 pounds
(130 kg).
Always wear appropriate athletic attire and shoes while operating the Matrix IC3 Indoor Cycle. Do
not wear loose clothing that could become caught on the Matrix IC3 Indoor Cycle or shoes with
loose laces.
Before using the Matrix IC3 Indoor Cycle, make sure that you are familiar with the operation of
the Indoor Cycle (see pages 8-12).
If you feel pain or dizziness while exercising, stop immediately, rest and cool down.
If replacement parts are needed, use only manufacturer-supplied parts.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
WARNING
Before beginning any exercise program, consult your physician. This is especially important for
persons over the age of 35 or persons with pre-existing health problems. Read all instructions
prior to use. Be aware that incorrect or extensive training can result in serious health injuries. The
manufacturer assumes no responsibility for personal injury or property damage sustained by or
through the use of this product.
Version 1.0 2013 IC-MXIC3B-01 Copyright by Indoorcycling Group GmbH 2013 | www.indoorcycling.com ENG 3
ENG ESP
BEFORE YOU BEGIN
Dear Customer,
Congratulations on selecting the Matrix IC3 Indoor Cycle.
The Matrix IC3 Indoor Cycle offers an impressive array of features designed to
are beginners or experienced athletes, the Matrix IC3 Indoor Cycle offers workouts that
Indoor Cycle.
If you have questions after reading this manual, please contact Indoorcycling Group GmbH or
visit the website www.indoorcycling.com. Before reading further, please familiarize
yourself with the parts that are labeled in the drawing below.
Version 1.0 2013 IC-MXIC3B-01 Copyright by Indoorcycling Group GmbH 2013 | www.indoorcycling.com ENG 4
Emergency brake handle
Lever handle
Saddle
Adjustment
knob
Combi
pedal
Chain guard
Resistance knob
Handlebar
Adjustment knob
Brake pad
Flywheel
Transport wheel
Leveling feet
frame. Please refer to this number in servicing and maintenance lists.
Lever handle
HOW TO ASSEMBLE Matrix IC3 Indoor Cycle
Version 1.0 2013 IC-MXIC3B-01 Copyright by Indoorcycling Group GmbH 2013 | www.indoorcycling.com ENG 5
SW 17mm
SW 13mm
3mm
5mm hand tight
1x
15mm Pedal
Wrench
1x
ENG ESP
1
3
2
4
STOP mark STOP mark
Seat clamp must be tightened securely from both sides to minimize loosening during use.
Version 1.0 2013 IC-MXIC3B-01 Copyright by Indoorcycling Group GmbH 2013 | www.indoorcycling.com ENG 6
HOW TO ASSEMBLE Matrix IC3 Indoor Cycle
SW 17mm
SW 13mm hand tight
1x 1x
15mm Pedal
Wrench
7
56
3mm
5mm
Version 1.0 2013 IC-MXIC3B-01 Copyright by Indoorcycling Group GmbH 2013 | www.indoorcycling.com ENG 7
HOW TO ASSEMBLE Matrix IC3 Indoor Cycle
SW 17mm
SW 13mm
3mm
5mm hand tight
1x 1x
Pedal marked R installed on right crank
(clockwise), Pedal marked L installed on left
crank (counterclockwise).
force to avoid loosening with use of the
indoor cycle.
15mm Pedal
Wrench
ENG ESP
8 9
10
R
L
13 mm
Seat clamp must be tightened securely from both sides to minimize loosening during use.
Please follow
instructions
The cycle tune-up must be performed at initial installation of the indoor cycle for optimal performance and
longevity. Please read and follow all instructions below. If the indoor cycle is not installed and tuned as
described, components may wear excessively and the indoor cycle may become damaged. If you have
questions about the installation, please contact
(for
example, BRUNOX) .
leveling feet underneath the front and/or rear stabilizer until the rocking motion is eliminated.
2. Verify emergency brake function to assure that emergency brake functions correctly.
3. Brake pad calibration: Turn resistance knob counterclockwise as far as possible (minimum bra-
can go.
4. Apply spray lubricant to the brake pad using the lubrication holes on the plastic part or the brake
pad and externally on the felt pad. Make sure brake pad is thoroughly soaked from end to end
spray lubricant purchased by the gallon (3.7 L) at the local hardware store.
5. Apply Lithium grease to the threads on the lower end of the brake rod. First, turn the resistance
knob clockwise until it stops. Apply a small amount of white lithium grease to the threads on the
brake rod above the two lock nuts. Then, turn the resistance knob counterclockwise until it stops.
6. Apply Lithium grease on the metal threads of all the adjustment knobs.
7. Check four (4) Allen bolts on RS pulley for tightness. If loose, apply LocTite Threadlocker
Blue-242 and retighten.
8. Verify R and L crank arm Allen bolts for tightness. If loose, apply LocTite Threadlocker Blue-242
and retighten.
9. Wipe down bike frame with rag moistened with solvent-free spray lubricant
10. Some parts of the indoor cycle may become loose during shipment. Check crank arms and check
all exposed screws, bolts and nuts, and make sure that they are properly tightened.
Customer Service
1. Provide basic maintenance instructions for clients and direct them to detailed maintenance
instructions (page 13-18).
Version 1.0 2013 IC-MXIC3B-01 Copyright by Indoorcycling Group GmbH 2013 | www.indoorcycling.com ENG 8
INITIAL INSTALL CHECKS
HOW TO ADJUST THE Matrix IC3 Indoor Cycle
The Matrix IC3 Indoor Cycle can be adjusted for maximum comfort and exercise effec-
tiveness. The instructions below describe one approach to adjusting the Matrix IC3 Indoor
Cycle to ensure optimal user comfort and ideal body positioning.
You may choose to adjust the Matrix IC3 Indoor Cycle differently.
Sit on the saddle and position your feet on the pedals, with the balls of your feet directly
above the spindles of the pedals (see the drawing below). Adjust the pedal straps so the
pedals, the pedals feature toe clips on one surface and SPD cleats on the opposite
surface. If desired, use the SPD cleats with cycling shoes instead of the toe clips.
Sit on the saddle and slowly pedal until the right pedal is in the lowest position. Your knees
should be slightly bent with no dropping of the hips.
Version 1.0 2013 IC-MXIC3B-01 Copyright by Indoorcycling Group GmbH 2013 | www.indoorcycling.com ENG 9
to the vertical aluminum stems.
ENG ESP
Please do not adjust saddle
height beyond the STOP mark
on the stem. Also ensure the
pop pin is fully engaged and
securely tightened (page 5).
Please do not adjust saddle
height beyond the STOP mark
on the stem and ensure the
pop pin is fully engaged and
securely tightened (page 5).
Proper horizontal adjustment of the saddle is very important in avoiding injury to the knees.
Sit on the saddle and move the pedals until the crank arms are in horizontal position.
Using your forward leg as a marker, your kneecap should be directly above the
center of the pedal so that a straight line is created between knee and center of the pedal
dismount the Matrix IC3 Indoor Cycle. Next, loosen the rear lever handle, slide the saddle
forward or backward as required, and then retighten the lever handle.
Version 1.0 2013 IC-MXIC3B-01 Copyright by Indoorcycling Group GmbH 2013 | www.indoorcycling.com ENG 10
HOW TO ADJUST THE Matrix IC3 Indoor Cycle
horizontal adjustment
with lever handle
Other manuals for IC3
2
This manual suits for next models
1
Table of contents
Other Matrix Exercise Bike manuals
Matrix
Matrix R3XE-01 User manual
Matrix
Matrix R7XE-02 Bike User manual
Matrix
Matrix CXP User manual
Matrix
Matrix ES MATRIX INDOOR CYCLE User manual
Matrix
Matrix U7xi User manual
Matrix
Matrix V Series User manual
Matrix
Matrix KranKcycle User manual
Matrix
Matrix U7X-01 User manual
Matrix
Matrix U3x-01 User manual
Matrix
Matrix U30 User manual
Matrix
Matrix U7xi User manual
Matrix
Matrix U3X-05 User manual
Matrix
Matrix R30 User manual
Matrix
Matrix U5x-05 User manual
Matrix
Matrix R1x User manual
Matrix
Matrix IC7 User manual
Matrix
Matrix R3x-01 User manual
Matrix
Matrix IC-MXIC7B-02 User manual
Matrix
Matrix Endurance User manual
Matrix
Matrix H7XE-05 User manual
