Matrix Electronic Technology element P User manual
MUSIC STREAMER COMBO
User Manual
www.matrix-digi.com
HIGH
PERFORMANCE
AUDIO
Matrix Electronic Technology Co., Ltd.
+86-29-86211122
B-801, No.111 Fengcheng 5th Rd.,
Xi'an, China
support@matrix-digi.com
Catalog
1. Packing list
2. Parts and name
2.1 Front panel
2.2 Rear panel
2.3 Display screen
2.3.1 Dispaly in main interface area
2.3.2 Volume control
2.3.3 Display for input channel
2.4 Remote control
3. Connection
3.1 Connect to AC power
3.2 Connect to input source
3.3 Connect to speakers
3.4 Connect to storage devices
3.5 Connect to LAN
3.6 Connect to WLAN
4. Play
4.1 Basic operation
4.1.1 Power on
4.1.2 Select the input source
4.1.3 Volume control
4.1.3.1 Volume adjustment
4.1.3.2 Mute
4.1.3.3 Hearing protection
4.1.4 Filter settings
4.1.5 Auto sleep and wake up
4.1.6 Remote control
4.2 Play music through optical, coaxial or IIS-LVDS port
4.3 Play music through AirPlay or DLNA
4.4 Play music from USB storage devices\SD Card\NAS
4.5 USB Audio mode
5. Settings
5.1 PCM Filters
5.2 DSD Filters
5.3 Dither
5.4 Jitter Eliminator
5.5 DPLL Bandwidth
5.6 IIS-LVDS Port Definition
5.7 Dimmer
5.8 Auto Sleep
5.9 User defined button settings
5.10 Network Type
5.11 Remote Control
5.12 Load Default
5.13 Product information
6. Appendix
6.1 File formats and sampling rate supported
6.2 About MQA
6.3 USB storage device requirements
6.4 IIS-LVDS Port
6.5 Technical specifications
····························01
·····························02
··························02
············02
·······················03
················03
·························03
····························13
····························13
································13
························13
························14
··················14
······························14
····························14
·················08
·······················09
··················09
······························09
···················09
·························10
················10
·······················10
11
···········11
11
·······················11
··········14
·····················14
····················15
······················15
················15
··15
························15
······16
·······················16
··············17
·························08
·····························08
·······················01
·····················01
···························13
······················15
························04
······························08
·····················04
··················05
···················05
················06
·························06
·······················07
Catalog
Packing list
01
2.1
Front panel
1.Packing list 2.Parts and name
1
2 3
4
5
1. Standby
2. Menu
3. User-defined
4. Volume/control knob
5. Display
6. Remote control sensor
7. Indicator light
1. Product ×1
2. Remote×1
3. Wi-Fi antenna×2
4. USB cable×1
5. Power cable×1
7
2
36
451
Parts & name
02
2.3 Display screen
2.2
Rear panel
1. NAS connection status
2. USB storage device connection status
3. MicroSD card status
4. Wi-Fi and LAN connection status
5. Input channel
6. Sampling rate
7. Auxiliary information
8. Volume bar
9. Output volume dB level
1. Right channel speaker - output
2. Right channel speaker + output
3. Left channel speaker - output
4. Left channel speaker + output
5. Coaxial input
6. Wi-Fi antenna jack
7. MicroSD card slot
8. USB HOST port
9. LAN port
10. USB Audio port
11. IIS·LVDS input
12. Optical input
13. Power input
2.3.1 Dispaly in main interface area
PCM 44.1 10.0
Optical 1
Filter 5 dB
k
5 6 7 984321
Speakers
L
RImpedance:4-8Ω
12 12 11 10 8 9
135 5 6 6
7 8421 3
Parts & name
03
2.4 Remote control
1
6
7
8
9
2
3
4
5
COA
OPT
IIS
USB
Filter
1. Current volume dB level
2. Volume bar
dB
10.0
2.3.2 Volume control
1 2
Coaxial 1
Input
1. Input channel
2. Select indicator
2.3.3 Display for input channel
1 2
1. Standby
2. Mute
3. Volume+
4. Volume-
5. Filter
6. Coaxial
7. Optical
8. IIS
9. USB/Network*
*This button can switch input channels between USB and
Network.
Connection
Please use the right three-phase power cable which includes the ground terminal and
ensure the ground is correctly connected, or you will have the possibility of electric
shock when you touch it.
Please unplug the power cable, if you need the element P to be disconnected from the
power.
element P is compatible with AC100-120V and AC220-240V power specifications.
Please make sure to switch the bottom power voltage according to your local valtage
enviroment before using. As shown:
The two sections of the voltage switch are 115V and 230V, each section for:
115V position is fit for AC100V-120V 50/60Hz
230V position is fit for AC220V-240V 50/60Hz
3.1 Connect to AC power
04
3. Connection
230
115
AC 220-240V
AC 100-120V
L
R
XLRXLR
RCA RCA
Connection
05
Connect to front-end devices including S/PDIF output signal through coaxial and
optical port, connect to Matrix digital audio interface products through IIS port.
3.2 Connect to input source
Connect 4-8Ω passive speakers to the connectors at the rear panel of element P.
Please disconnect the power supply of element P before connect the speakers to it,
and make sure the speaker cables are not shorted.
3.3 Connect to speakers
Speakers
L
RImpedance:4-8Ω
TV CD player
Game console Computer
Speakers
L
RImpedance:4-8Ω
Speaker R Speaker L
Connection
06
There are two USB Host ports on the rear panel to connect with standard mass
storage USB devices.
The MicroSD card support up to 128GB，push to install or popup the card.
3.4 Connect to storage devices
XLR
R
XLR
Connect to LAN, please use ethernet cable to connect element P with router ( recom-
mend using CAT-5 or higher version shielded ethernet cable), and let element P in the
network status as shown below:
It is advisable to set up the router as DHCP server, and this function will allocate the
device IP address in LAN automatically.
3.5 Connect to LAN
Speakers
L
RImpedance:4-8Ω
Connect to LAN port
Connect to WAN port
Connect to LAN port
Connect to LAN port
Router
Computer NAS
Internet
Connection
07
3.6.2. Let element P in the network status as shown below:
Connect to LAN port
Connect to WAN port
Connect to LAN port
Router
Computer NAS
Internet
MA Remote APP
3.6.1. Please make sure to properly install the two Wi-Fi antennas on the rear panel
(insert the Wi-Fi antenna into the jack and tighten it clockwise). You can adjust the
antenna angle to change the signal effect.
3.6 Connect to WLAN
Speakers
L
RImpedance:4-8Ω
1 2 3
3.7.3. Scan QR code below to download MA Remote app, please run the app on your
mobile device and follow the configuration wizard to set up the wireless network.
Table of contents
Other Matrix Electronic Technology Media Converter manuals
