Marshall Electronics V-LCD171MD User manual
Marshall Electronics
Model No.
V-LCD171MD
Operang Instrucons
2
This page intenonally leblank
3
Table of Contents
Installaon and Inial Setup.......................................................................................................................................................4
Top and Front Panel Features ----------------------------------------------------------------------------------------------------5
Rear Panel Features-----------------------------------------------------------------------------------------------------------------6
Compable Input Formats---------------------------------------------------------------------------------------------------------7
Main Menu and Navigaon--------------------------------------------------------------------------------------------------------8
Using the menu buons..................................................................................................................................................................8
Using the RotoMenu (BRIGHT) knob...............................................................................................................................................8
Scaling Submenu .............................................................................................................................................................................9
Color Submenu..............................................................................................................................................................................12
Markers Submenu .........................................................................................................................................................................14
Filters Submenu.............................................................................................................................................................................16
Audio Submenu .............................................................................................................................................................................20
Signal Analysis Submenu ...............................................................................................................................................................21
User Sengs Submenu .................................................................................................................................................................22
System Submenu...........................................................................................................................................................................23
Specificaons ----------------------------------------------------------------------------------------------------------------------- 25
Dimensions-------------------------------------------------------------------------------------------------------------------------- 26
Maintenance------------------------------------------------------------------------------------------------------------------------ 27
Warranty---------------------------------------------------------------------------------------------------------------------------- 27
4
Installation and Initial Setup
Unpacking
Carefully unpack the V-LCD171MD monitor and verify thahe following items are included:
•V-LCD171MD Monitor (3G Module Oponal)
•V-PS12-5V-XLR Power Supply
•Operang Instrucons
Inspeche unior any physical damage that may have occurred during shipping. Should there be any damage, immediately
contact Marshall Electronics at (800) 800-6608. If you are not located within the connental United States, call +1 (310) 333-
0606.
Connections, Power-On and Initial Setup
Plug the power supply into an AC power source (100-240 V @ 50/60 Hz). Aach the Power connector to the back ohe monitor.
Conneche required cables for video signal input and output. (Power must be applied to the V-LCD171MD for the acve loop-
though outpuo be acvated.) The monitor defaults to ‘ON’ when power is supplied. Video will automacally be detected and
displayed on the screen.
5
Top and Front Panel Features
Power Button
Turn the display ON or OFF by pressing the power buon. In
the ON state, the LED on the power buon will dim. In the
OFF state, the LED on the buon will be aull power.
Input Select Button
Use the Input select buon to switch between the on-board
HDMI input or (if available) the module Input.
User-Denable Function Buttons
Four user-definable funcon buons can be used for direct
access to various sengs. Funcons are assigned using the on-
screen menu or by highlighng a funcon and pressing one of
the funcon buons. See User Sengs Submenu for
informaon on changing Funcons.
Menu Navigation Buttons
Use the Menu, , , and Select buttons to display and
navigate the on-screen menu. See MAIN MENU AND
NAVIGATION for details on using the Menu.
Image Adjustment Knobs
Use the image adjustment knobs to adjust color saturaon,
brightness and contrast ohe image. The status of each image
adjustment parameter is shown on the boom leohe
screen, with values ranging from 0 to 100. Pressing a knob
once displays the current value. Pressing a knob twice resets
the value to the default seng.
User Control Knob
The USER control knob can be customized to control mulple
funcons. Change the funcon ohis knob in the MENU. See
the User Sengs Submenu for more informaon.
Stereo Headphone Jack
The 1/8” Headphone jack on monitor’s side takes two
channels of embedded HDMI or SDI audio and provides an
audio signal. See the Audio Submenu for informaon on
working with audio capabilies.
Tally LED
Three user acvated LED tallys. Acvate these using the HD15
Connector on the rear ohe unihrough contact closure.
6
RearPanel Features
Power Connector
Power the unihrough this port. Power can be supplied from
the included power supply or from a variety of DC sources
supplying the appropriate voltage on the listed pins. See the
Specificaons secon for more informaon.
HDMI Input and Output
The V-LCD171MD has one HDMI input and one acve loop-
through output. The HDMI Outpus HDCP Compliant and will
NOT pass through HDCP protected content. See Compable
Input Formatsfor details on accepted formats.
Module Slot
Us the Module sloo install the 3GSDI module. Contact
Marshall Electronics for more informaon.
Tally Port
For acvaon ohe tally LEDs on the front ohe unit.
VESA mounting area
Standard VESA mount paern for customized mounng
opons.
7
Compatible Input Formats
MD-3GE
525i/60, 625i/50
720p/25, 29.97, 30, 50, 59.94, 60
1080p/23.98, 23.98sF, 24, 24sF, 25, 29.97, 30
1035i/59.94, 60
1080i/ 50, 59.94, 60
3G – Level A
YCbCr, RGB
1080p/ 60, 59.94, 50
HDMI Input
480p59.94, 576p50
720p/25, 29.97, 30, 50, 59.94, 60
1080p/23.98, 23.98sF, 24, 24sF, 25, 29.97, 30
1080p/ 50, 59.94, 60
1035i/59.94, 60
1080i/ 50, 59.94, 60
8
MAIN MENU AND NAVIGATION
Access and navigate the main menu using the 4 menu buons or the RotoMenu™ knob:
Using the menu buttons
•Press the MENU buon to enter the main menu.
•Use the and buons to scroll through the main menu or each submenu.
•Press the SELECT buon to enter a submenu or choose a seng.
•Press the MENU buon to exihe main menu, or return to the main menu from a submenu.
Using the RotoMenu (BRIGHT) knob
The Marshall Electronics RotoMenu concept has been brougho our line of camera top monitors to make navigang the Main
Menu easier than ever. To RotoMenu funconality has been integrated into the BRIGHT knob, so that whenever the Main Menu
is up,
•Press the MENU buon to enter the main menu.
•Rotate the BRIGHT knob to scroll up or down in the main menu or each submenu.
•Press the BRIGHT knob to enter a submenu or choose a seng.
By default, the menu automacally mes out aer 15 seconds oeing idle.
Main Menu
9
Scaling Submenu
Use the Scaling submenu to adjust various scaling opons and to allow greater control oow your video signal is shown on the
display.
•Input Crop
Enable the Input Crop funcon to seleche area of acve video that you would like shown on the image display. Seleche
desired Input by accessing the Adjust opon below the main funcon:
•Adjust
Use the BRIGHT knob to move the selecon box LEFT and RIGHT.
Use the COLOR knob to move the selecon box UP and DOWN.
Use the CONTRAST knob to move the right border LEFT and RIGHT.
Use the USER knob to move the boom border UP and DOWN.
Scaling Submenu
10
When you are sasfied with the posion, press the SELECT buon or press the BRIGHT knob to confirm your selecon.
The new cropped selecon will be displayed on the screen. If your Aspect Rao is seo AUTO, the monitor will select
the closest aspect rao to the dimensions of your customized Input.
Aspect Ratio
Use this menu opon to switch between several aspect rao sengs.
•In 4:3 mode, images are scaled up or down to fill the maximum 4:3 poron ohe screen.
•In 16:9 mode, images are scaled to fill the enre 16:9 screen.
•In Full Screen, images are scaled to fill the enre screen.
•In Custom mode, images scaling is adjusted to your selecon in the Adjust poron ohe menu:
Adjust
Use any ohe rotary knobs to select your desired aspect rao. Some ohe more common aspect rao
sengs are shown on the Aspect Rao selecon widget. As you move along the scale, your current aspect rao will be
displayed below the widget.
Aspect Ratio sele
ction widget
Table of contents
Other Marshall Electronics Monitor manuals
Marshall Electronics
Marshall Electronics V-MD173 User manual
Marshall Electronics
Marshall Electronics V-R102DP-HDSDI User manual
Marshall Electronics
Marshall Electronics V-R84DP-HDA User manual
Marshall Electronics
Marshall Electronics V-R171-IMD-HDSDI User manual
Marshall Electronics
Marshall Electronics V-R231-IMD-HDSDI User manual
Marshall Electronics
Marshall Electronics QVW-2710 User manual
Marshall Electronics
Marshall Electronics V-R151DP-AFSD User manual
Marshall Electronics
Marshall Electronics V-LCD101MD User manual
Marshall Electronics
Marshall Electronics QV261A-HDSDI User manual
Marshall Electronics
Marshall Electronics M-CT710 User manual
Marshall Electronics
Marshall Electronics V-R653P-HDSDI User manual
Marshall Electronics
Marshall Electronics TFT-MegaPixel Monitor V-R70P-SD User manual
Marshall Electronics
Marshall Electronics V-LCD90MD-3G User manual
Marshall Electronics
Marshall Electronics V-R84DP-2C User manual
Marshall Electronics
Marshall Electronics V-R44P-HDSDI User manual
Marshall Electronics
Marshall Electronics V-LCD5.6-PRO User manual
Marshall Electronics
Marshall Electronics V-LCD173HR User manual
Marshall Electronics
Marshall Electronics V-LCD17HR User manual
Marshall Electronics
Marshall Electronics M-LCD7-HDI User manual
Marshall Electronics
Marshall Electronics V-R72DP User manual
