Marantz LC1510 User manual
R
Model LC1510 User Guide
LCD TV/Monitor
i
RECORD YOUR MODEL NUMBER
(Now, while you can see it)
The model and serial number of your new TV are located
on the back of the TV cabinet. For your future conve-
nience, we suggest that you record these numbers here:
MODEL
NO.____________________________________
SERIAL
NO.____________________________________
WARNING :
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert
the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the pres-
ence of important operating and maintenance (servicing) instructions in the literature accom-
panying the appliance.
WARNING :
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
NOTE TO CABLE/TV INSTALLER:
This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of
the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and,
in particular, specifies that the cable ground shall be connected to the grounding system of
the building, as close to the point of the cable entry as practical.
REGULATORY INFORMATION:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference when the equipment is operated in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful inter-
ference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following mea-
sures: • Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Do not attempt to modify this product in any way without written authorization from
MARANTZ Unauthorized modification could void the user’s authority to operate this product.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ii
AVERTISSEMENT :
AFIN DE RÉDUIRE TOUT RISQUE DE CHOC ÉLECTRIQUE, NE PAS ENLEVER LE COU
VERCLE (OU L’ARRIÈRE).AUCUNE PIÈCE NE PEUT ÊTRE RÉPARÉE PAR L’UTILISATEUR.
CONFIER L’ENTRETIEN ÀUN TECHNICIEN QUALIFIÉ.
Le symbole de l’éclair àpointe de flèche àl’intérieur d’un triangle équilatéral a pour but d’aver-
tir l’utilisateur que l’appareil renferme des circuit non isolés àhaute tension suffisamment puis-
sant pour constituer un risque de chocs électrique.
Le symbole du point d’exclamation àl’intérieur d’un triangle équilatéral a pour but d’avertir
l’utilisateur que des renseignements importants relatifs àl’entretien et au fonctionnement fig-
urent dans la documentation qui accompagne l’appareil.
AVERTISSEMENT :
POUR ÉVITER TOUT RISQUE D’INCENDIE OU DE SECOUSSE ÉLECTRIQUE, NE PAS
EXPOSER CET APPAREIL ÀLA PLUIE OU ÀL’HUMIDITÉ.
AVIS ÀL’INSTALLATEUR DU SYSTÈME DE TÉLÉDISTRIBUTION:
Cet avis a pour but de rappeler àl’installateur du système de télédistribution que l’article 820-
40 du NEC (code national de l’électricitédes É.-U.) fournit des directives quant àla façon
d’effectuer correctement la mise àla terre et précise plus particulièrement que le câble de
mise àla terre doit être connectéau système de mise àla terre de l’édifice aussi près que
possible de l’entrée du câble.
RENSEIGNEMENTS SUR LA RÉGLEMENTATION:
Cet équipement a ététestéet est conforme aux normes des appareils numériques de classe
B, conformément au paragraphe 15 des règlements de la FCC. Ces normes sont conçues
pour assurer une protection raisonnable contre les interférences indésirables pour les instal-
lations résidentielles. Cet équipement génère, utilise et peut émettre de l’énergie de
radiofréquence et, s’il n’est pas installéselon les instructions, il peut causer des interférences
indésirables aux communications radio. Toutefois, il n’y a aucune garantie que des
interférences ne se produiront pas dans le cas d’une installation particulière. Si cet
équipement cause des interférences àla réception radio ou télé, ce qui peut être déterminé
en mettant l’appareil hors circuit, puis en circuit, l’utilisateur est priéd’essayer de corriger
l’interférence en prenant une des mesures suivantes:
•Réorienter l’antenne réceptrice.
•Éloigner l’équipement du récepteur.
•Brancher cet équipement sur une prise autre que celle utilisée avec le récepteur.
•Consulter le marchand ou un technicien radio-téléqualifié.
AVERTISSEMENT:
Ne pas modifier cet appareil sans une autorisation écrite de MARANTZ. Toute modification
non autorisée annule la possibilitépour l’utilisateur d’utiliser cet appareil.
AVERTISSEMENT
RISQUE DE CHOCS ÉLECTRIQUES
NE PAS OUVRIR
Left master page
iii
IMPORTANT SAFETY INSTRUCTIONS
Important safeguards for you and your new product
Your product has been manufactured and tested with your safety in mind. However, improper use
can result in potential electrical shock or fire hazards. To avoid defeating the safeguards that have
been built into your new product, please read and observe the following safety points when
installing and using your new product, and save them for future reference.
Observing the simple precautions discussed in this booklet can help you get many years of enjoy-
ment and safe operation that are built into your new product.
This product complies with all applicable U.S. Federal safety requirements, and those of the
Canadian Standards Association.
(Continued on next page)
1. Read Instructions
All the safety and operating instructions should
be read before the product is operated.
2. Follow Instructions
All operating and use instructions should be fol-
lowed.
3. Retain Instructions
The safety and operating instructions should be
retained for future reference.
4. Heed Warnings
All warnings on the product and in the operating
instructions should be adhered to.
5. Cleaning
Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
6. Water and Moisture
Do not use this product near water - for exam-
ple, near a bath tub, wash bowl, kitchen sink, or
laundry tub, in a wet basement, or near a swim-
ming pool.
7. Accessories
Do not place this product on an unstable cart,
stand, tripod, bracket, or table. The product may
fall, causing serious injury to a child or adult,
and serious damage to the product. Use only
with a cart, stand, tripod, bracket, or table rec-
ommended by the manufacturer, or sold with the
product. Any mounting of the product should fol-
low the manufacturer’s instructions, and should
use a mounting accessory recommended by the
manufacturer.
8. Transporting Product
A product and cart combination should be
moved with care. Quick stops, excessive force,
and uneven surfaces may cause the product
and cart combination to overturn.
9. Attachments
Do not use attachments not recommended by
the product manufacturer as they may cause
hazards.
10. Ventilation
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of
the product and to protect it from overheating,
and these openings must not be blocked or cov-
ered. The openings should never be blocked by
placing the product on a bed, sofa, rug, or other
similar surface. This product should not be
placed in a built-in installation such as a book-
case or rack unless proper ventilation is provid-
ed or the manufacturer’s instructions have been
adhered to.
11. Power Sources
This product should be operated only from the
type of power source indicated on the marking
label. If you are not sure of the type of power
supply to your home, consult your product deal-
er or local power company. For products intend-
ed to operate from battery power, or other
sources, refer to the operating instructions.
12. Line-Cord Polarization
This product is equipped with a three-wire
grounding type alternating-current line plug (a
plug having one blade wider than the other).
This plug will fit into the power outlet only one
way. This is a safety feature. If you are unable
to insert the plug fully into the outlet, contact
your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polar-
ized plug.
13. Power-Cord Protection
Power-supply cords should be routed so that
they are not likely to be walked on or pinched
by items placed upon or against them, paying
particular attention to cords at plugs, conve-
nience receptacles, and the point where they
exit from the product.
PORTABLE CART WARNING
iv
IMPORTANT SAFETY INSTRUCTIONS
(Continued from previous page)
14. Outdoor Antenna Grounding
If an outside antenna or cable system is con-
nected to the product, be sure the antenna or
cable system is grounded so as to provide some
protection against voltage surges and built-up
static charges. Article 810 of the National
Electrical Code (U.S.A.), ANSI/ NFPA 70 pro-
vides information with regard to proper ground-
ing of the mast and supporting structure,
grounding of the lead-in wire to an antenna dis-
charge unit, size of grounding conductors, loca-
tion of antenna-discharge unit, connection to
grounding electrodes, and requirements for the
grounding electrode.
15. Lightning
For added protection for this product (receiver)
during a lightning storm, or when it is left unat-
tended and unused for long periods of time,
unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent dam-
age to the product due to lightning and power-
line surges.
16. Power Lines
An outside antenna system should not be locat-
ed in the vicinity of overhead power lines or
other electric light or power circuits, or where it
can fall into such power lines or circuits. When
installing an outside antenna system, extreme
care should be taken to keep from touching
such power lines or circuits as contact with them
might be fatal.
17. Overloading
Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric
shock.
18. Object and Liquid Entry
Never push objects of any kind into this product
through openings as they may touch dangerous
voltage points or short-out parts that could result
in a fire or electric shock. Never spill liquid of
any kind on the product.
19. Servicing
Do not attempt to service this product yourself
as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
20. Damage Requiring Service
Unplug this product from the wall outlet and
refer servicing to qualified service personnel
under the following conditions:
a. If the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fall-
en into the product.
c. If the product has been exposed to rain or
water.
d. If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions as an improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician
to restore the product to its normal operation.
e. If the product has been dropped or the cabi-
net has been damaged.
f. If the product exhibits a distinct change in
performance.
21. Replacement Parts
When replacement parts are required, be sure
the service technician has used replacement
parts specified by the manufacturer or have the
same characteristics as the original part.
Unauthorized substitutions may result in fire,
electric shock, or other hazards.
22. Safety Check
Upon completion of any service or repairs to this
product, ask the service technician to perform
safety checks to determine that the product is in
proper operating condition.
23. Wall or Ceiling Mounting
The product should be mounted to a wall or ceil-
ing only as recommended by the manufacturer.
24. Heat
The product should be situated away from heat
sources such as radiators, heat registers,
stoves, or other products (including amplifiers)
that produce heat.
Antenna Lead in Wire
Antenna Discharge Unit
(NEC Section 810-20)
Grounding Conductor
(NEC Section 810-21)
Ground Clamps
Power Service Grounding
Electrode System (NEC
Art 250, Part H)
Ground Clamp
Electric Service
Equipment
Example of Grounding According to National
Electrical Code Instructions
NEC - National Electrical Code
v
English
INTRODUCTION
1
INTRODUCTION
CONNECTIONPC
CONNECTION
BASIC
FUNCTIONS
CLOCK
SETTING
AUDIO /
VIDEO
INFORMATION CONNECTION
PC
CONNECTION
BASIC
FUNCTIONS
CLOCK
SETTING
AUDIO /
VIDEO
INFORMATION
1Safety warnings i
Important safety instructions iii
Controls 2
Basic composition of LCD TV 6
2
3
4
5
6
7
Connecting antenna 9
Connecting external equipment 10
Connecting DVD player 12
Connecting DTV 13
Connecting PC as monitor 14
Function checking in PC mode 16
Using remote control 17
Turning on the set 19
Function checking in TV mode 20
Setting language 21
Closed caption function 22
Parental control function 26
Programming / Erasing channels 28
Adjusting audio condition 37
Adjusting video condition 40
Setting current time 30
Setting Off-Timer function 32
Setting On-Timer function 34
Setting sleep time function 36
Product specifications 42
Before operating the
set, please read this
manual carefully.
CONTENTS
INDEX
Controls
2
On/Standby indicator
Remote control sensor
Power button
* Remove vinyl coating for protection from staining before using.
Front of the set
Front of the set
Back of the set
Back of the set
English
INTRODUCTION
3
DC 12V ANT IN
75 Ω
PC/DTV INPUT S-VIDEO
H/P
RLVIDEO IN AUDIO
(MONO)
COMPONENT INPUT(480i)
B
CCR
TV/Video button
Power input
Antenna input Component input
Headphone
jack Audio/Video
input
PC / DTV input
S-Video input
Enter button Channel buttons
Power buttonMenu button
Remote control sensor
Volume buttons
On/Standby indicator
Front control panel
Front control panel
Connecting ports
Connecting ports
Controls
4
POWER BUTTON
NUMBER BUTTONS
FLASHBK BUTTON
MENU BUTTON
CHANNEL (55,∞∞) BUTTONS
Remote Control
Remote Control
●Press the FLASHBK button to view the last
programme you were watching.
TV/PC BUTTON
Other manuals for LC1510
1
Table of contents
Languages:
Other Marantz LCD TV manuals
Marantz
Marantz LC2601 User manual
Marantz
Marantz LC4602e User manual
Marantz
Marantz LC3050 User manual
Marantz
Marantz LC4202e User manual
Marantz
Marantz LC3701E User manual
Marantz
Marantz LC1510 User manual
Marantz
Marantz LC3050 User manual
Marantz
Marantz LC1500 User manual
Marantz
Marantz PV6080 Operating manual
