Marantz PV6080 Operator's manual

123

OUT

SET-UP AND QUICK USE GUIDE

TABLE OF CONTENTS

Getting Started

Warning/Precautions..................................1

Hooking Up Your TV ................................1

How to Use the First Time Set-Up Control ..............2

Basic TV and Remote Control Operation .................3

How to Use the Onscreen Menu Controls.................4

12 1

• For details on product registration, warranty,

and service refer to the other literature included

with your TV information packet.

Please retain all these materials and keep them

handy for future reference.

For homes with Cable

TV Converter

Descrambler Boxes (with

Premium/Movie Channels

scrambled), follow the

steps to the right for an

alternative ANT A and

ANT B PIP feature

hookup. Note the Cable TV

signal will be split before

connection to the

Converter box (an option-

al two-way 75 ohm Signal

Splitter will be required).

CABLE BOX

CABLE CONVERTER BOXES

Connect your Cable

TV signal to the single 75 ohm

INPUT plug on a two-way

Signal Splitter (optional).

Connect one end of RF

Coaxial Cable to each of the

OUTPUT plugs on the 75 ohm

Signal Splitter. The two lengths

of RF Coaxial Cable need F-

type connectors (screw-on or

push type) for both ends.

BEGIN

Round Cable

75ΩOhm Cable TV Company

Cable TV Signal

Connect one of the Signal

Splitter OUTPUTs to the

INput terminal on the Cable

TV Converter Box. Then route

another connection from the

Cable Converter OUTput ter-

minal to the ANT A Input on

the rear of the TV.

STOP

Your TV has two sepa-

rate ANT(enna)/Cable

inputs on the rear of the

set. These two signal

inputs offer convenient

hook-up options for both

normal TV program view-

ing and Picture-In-Picture

(PIP) features.

The ANT(enna) A input is

intended for use and view-

ing on the TV’s main

screen. Your home’s pri-

mary Antenna, or Cable

TV signal, should be con-

nected to this input for

normal TV setup, use and

feature operation.

The ANT(enna) B input is

a second, or auxiliary sig-

nal source, designed to

supply your TV’s Picture-

In-Picture (PIP) feature.

For many homes the use of

a single existing Antenna

(or Cable TV) source, for

both ANT A and B, will be

the preferred method of

connection. This type of

connection (optional

Signal Splitter required)

will work properly for the

TV’s Main on-screen fea-

tures, as well as retain all

the features designed for

PIP. For more details refer

to the Picture-In-Picture

section in your other

owner’s manual.

ANTENNA OR

CABLE TV

ANT(ENNA) A & B INPUTS Note: Your

HD Widescreen

model TV is also

capable for connec-

tion and use with

digital signal Set

Top Box providers.

These optional

Advanced

Television Systems

Committee (ATSC)

equipment convert-

ers can be used to

display digital

broadcast system

programming on

your High

Definition ready

Widescreen TV.

Be sure to set the

TV for the type sig-

nal you've connect-

ed (see "SETUP" on

page 2 of this

Guide.)

Your TV can set itself

to select only the

channel numbers on

your Cable system

(see “Setup" page 2).

If you use a Cable

Converter box, set

the TV to the same

channel as the con-

verter's CH 3/4

switch (on the rear of

the converter.)

To order any option-

al accessory contact

your dealer or call

the toll-free accesso-

ry ordering number

(1-800-851-8885):

• Two Way Splitter

(M61000)

• 300-75 ohm

Adapter

(M61020)

• UHF/VHF

Antenna

Combiner

(SBV111133A01)

SMART

HELP

A typical ANT(enna)

A and B connection (using a

common signal source and an

optional Signal Splitter):

If your Antenna or Cable TV

signal has a round cable con-

nector (75 ohm) on the end,

then you're ready to connect it

to the 75ohm Signal Splitter.

If your antenna has flat twin-

lead wire (300 ohm), you first

need to attach the antenna wires

to the screws on a 300 to 75

ohm adapter before connecting

to the 75ohm Signal Splitter.

Connect your Antenna or

Cable TV signal to the single

75 ohm input plug on the two-

way Signal Splitter (optional).

Then connect two lengths of RF

Coaxial Cable to the two Output

plugs on the two-way Signal

Splitter (F-type connector on

both ends).

300 to 75ΩAdapter

(483521827003)

Twin Lead

Wire

Back of TV

BEGIN

WARNING: TO PREVENT FIRE OR SHOCK

HAZARD DO NOT EXPOSE THIS UNIT TO

RAIN OR EXCESSIVE MOISTURE.

Round Cable

75ΩOhm

- Outdoor or Indoor Antenna -

receives normal broadcast channels

2-13 (VHF) and 14-69 (UHF).

Note: Proper operation of your TV is not dependent upon

connection of the ANT B input. Its main purpose is to provide

an easily connected, dedicated picture source for PIP feature

use. Other signal source options (such as a satellite dish sys-

tem, additional external antenna, VCR, or Video Game) could

also be connected and displayed on the TV screen through the

use of the ANT B input.

Note: Although theANT B input can be used and swapped

as the source for the TV’s Main picture, certain setup fea-

tures (such as Smart Clock) are only based on a signal being

detected at the ANTA input. To ensure that all features are

operating properly, you may not want to rely solely on the ANT

B input as your TV’s Main screen signal source.

Connect the twin Output

plugs on the Signal Splitter to

the ANT A and ANT B inputs

on the rear of the TV. Push the

round connector end of the RF

Coaxial Cable onto the

ANT(enna) plug and screw it

down tight (if using threaded

cables).

OPTIONAL TWO-WAY

SIGNAL SPLITTER

STOP

Combination VHF/UHFAntenna

(single 75ohm Input to twin

75 ohm Outputs - optional

RF Coaxial connecting

cables also required)

ANT(enna) A

Input ANT(enna) B

Input

• The signal routed to the TV’s ANT B input will allow for

the selection and viewing of Cable channels at the TV

(except for the scrambled Premium/Movie channels).

OPTIONAL TWO-WAY

SIGNAL SPLITTER

Cable TV Converter

Box Connection

Cable TV Company

Connect the remaining

Signal Splitter OUTPUT

from the Splitter to the ANT

B Input on the rear of the TV.

• The signal routed to the TV’s ANT A input will allow for

Premium/Movie channels to be viewable on the TV.

• Channel selection will be at the Converter.

• The ANT A input channel on the TV should be set to the same

output channel as the Converter box (usually CH3 or 4).

Connect to ANT A Input Connect to ANT B Input

1 - 3135 015 20901

NOTE: This owner's manual is used with several different

television models. Not all features (and drawings) dis-

cussed in this manual will necessarily match those found

with your television set. This is normal and does not

require you contacting your dealer or requesting service.

HD Widescreen Television

All manuals and user guides at all-guides.com

all-guides.com

FEATURES

EXIT

MAIN MENU

SOUNDPICTURE

1ST TIME SETUP

POWER

SOURCE OFFON ON/OFF

CLONE MACRO MODE

LEARNING REMOTE CONTROL

RC-18SR

MACRO MACRO

VOLCH

LD DVD

AUX

TAPE

TUNER

CD-R

/MD

DSS/

VCR2

VCR1

MUTE

GUIDEAMP

This completes the

First-Time Setup.

Press "M" to Exit Setup

TV GUIDE PLUS +

Setup

10:17a

Where do you live?

B USA

Y CANADA

Press color key to select

STOP

After ALL connections

and First-Time Setup for

the GUIDE PLUS+ system

are completed, the TV

will have to be turned

OFF overnight to receive

program information.

Many of the current TV

control settings will be

modified by continuing

with First-Time Setup.

Press STATUS to Quit

Press "M" to Continue

System is testing for

correct tuning mode

for ANT A.

* Please Wait *

The search for active

channels is complete

for ANT A.

17 channels were found

and saved in memory

Press "M" to Continue

System is searching for

all active channels

on ANT A.

* Please Wait *

Testing channel 2

in cable mode.

The First-Time Setup

provides a simple method

of adjusting the most

important controls for

this television receiver.

Press "M" To Continue

Press "▲▼" to select the

language you would like

the TV displays to use.

ENGLISH

ESPANOL

FRANCAIS

Press "M" to Continue

Please check that your

other antenna or cable is

connected to the plug

marked ANT B on

the TV rear input panel.

This TV is equipped with

the TV Guide Plus+ feature.

This feature is designed

to operate only on the

main antenna, ANT A.

Press "M" to Continue

Please check that your

main antenna or cable is

connected to the plug

marked ANT A on

the TV rear input panel.

Press STATUS to Quit

Press "M" to Continue

System is testing for

correct tuning mode

for ANT B.

* Please Wait *

The search for active

channels is complete

for ANT B.

17 channels were found

and saved in memory

Press "M" to Continue

System is searching for

all active channels

on ANT B.

* Please Wait *

Testing channel 2

in cable mode.

Press STATUS to Quit

Press "M" to Continue

This TV is equipped with

a Surround-Sound system.

Surround Sound requires

the use of additional

speakers being placed

around your room.

Press "M" to Continue

Please thoroughly read

the section in your

owners manual which

details the proper setup

and operation of the

Surround-Sound System.

Press "M" to Continue

CONVERGENCE MENU

ALIGN RED

ALIGN BLUE

CONVERGE MULTI POINT

BACK

PLEASE REFER

TO YOUR

GUIDE PLUS+

INSTRUCTION MANUAL

FOR DETAILS ON

1st TIME SETUP.

HOW TO USE FIRST TIME SETUP

First Time Setup automati-

cally takes care of some

basic TV control settings for

you. Follow the steps in this

section to quickly add area

channel numbers into the

TV's memory, and set the TV

for your connected signal

(Antenna or Cable.) You can

also set the GUIDE Plus+®

system feature (if desired).

AUTOMATIC SETTINGS

SETUP Press the MENU

SELECT button on the TV,

or on the remote’s LCD panel

“D1” control button (Wide

TV - Mode 1 screen active).

Note: You may also use the

OK button area on the

remote to easily select the

TV’s Menu features.

An on-screen list of TV fea-

tures shows on the "MAIN

MENU".

BEGIN

Select "1ST TIME

SETUP" on the TV's Main

Menu. (Selected MENU item

is highlighted in RED.)

Press the remote's OK area

arrow ring buttons to

move UP/DOWN and from

SIDE-TO-SIDE within the

list of on-screen features.

Press CH(annel) ▲ ▼ and

VOL(ume) (+) (-) on the TV

keyboard to also move

UP/DOWN and from SIDE-

TO-SIDE within the list of

on-screen features.

Press the OK Menu

ring button on the remote

(or the Menu button on the

TV) to begin SETUP.

Follow the instructions

shown on the TV screen to

guide you through the First

Time Setup and use of your

new TV.

STO

• Press the STATUS/EXIT but-

ton on the remote or TV to

stop the SETUP at any time.

• Remember, SETUP is a first -use, one-

time operation and will not have to be

repeated (only the clock settings can be

lost).

• Even if there is no Antenna or Cable

signal connected to the ANT(enna) B

input (located on the rear of the TV), 1st

Time Setup will still attempt to add

channels into memory for that source.

In such cases, a channel search in the

Antenna Mode will be completed, and

“0 channels saved in memory” will be

displayed on-screen.

SMART HELP

Note: The GUIDE Plus+®system is

an electronic program service avail-

able with your set to show you cur-

rent and future TV listings; program

content descriptions, and other pro-

gramming information. Your TV may display a GUIDE Plus+ sys-

tem demonstration mode when first turned on for normal opera-

tion and use. Pressing the TV’s control panel or remote control

buttons will enable you to bypass the demonstration and continue

with normal TV program viewing.

Remove the GUIDE Plus+ Demo Mode Pin (tag label attached to

the “G-LINK” connection plug at the rear of TV) when setting up

the GUIDE Plus+ system for use (and to completely disable the

automatic demo). Follow the instructions contained in your sepa-

rate GUIDE Plus+ information manual for feature installation and

other operation details.

Note: Convergence

(or lining up of red

and blue light paths

on the TV screen)

has been preset at

the factory for your conve-

nience and should not need

any further adjustments.

However, Convergence con-

trols are provided (in both the

First Time Setup and Picture

Menu areas) in case the picture on your TV shows color fringing.

Color fringing is when colors “bleed” or appear around the edges

of onscreen images and objects. Please refer to the TV’s Picture

Menu Convergence control page section for further details.

PRESS TO ALIGN BLUE

PRESS MENU TO RETURN

PRESS TO ALIGN RED

PRESS MENU TO RETURN

CONVERGENCE MULTI POINT

CONVERGE RED POINTS

CONVERGE BLUE POINTS

RESTORE FACTORY SETTINGS

SAVE ADJUSTMENTS

BACK

CONVERGE RED POINTS

USE TO ADJUST

DIGIT 2, 4, 6, 8 TO MOVE CURSOR

MENU TO RETURN

PRESS MENU NOW TO CONTINUE

All manuals and user guides at all-guides.com

POWER

ON/OFF

OFF

CLONE MACRO MODE

LEARNING REMOTE CONTROL

RC-18SR

MACRO

DSS/

VCR2

TUNER CD

TAPE AUX CD-R

/MD

VCR1

VOL

AMP

GUIDE MUTE

VOL

STATUS/EXIT

2:30

WABC

VOL

STATUS/EXIT

SOURCE

SELECT

TV AND REMOTE CONTROL OPERATION

TELEVISION

To load the supplied bat-

teries into the remote:

1. Remove the battery

compartment lid on the

back of the remote.

2. Place the batteries (4-

AA) in the remote. Be

sure the (+) and (-) ends

of the batteries line up

correctly (inside of case is

marked.)

3. Reattach the battery lid.

BATTERY INSTALLATION

Press the TV

"System" button on the

remote to be sure the remote

sends its commands to the TV.

Point the remote control

toward the remote sensor win-

dow on the TV when operating

the TV with the remote.

BEGIN

STOP

Press the POWER

button to turn the TV ON. Press the VOLUME UP

(+) or DOWN (-) buttons to

adjust the TV sound level.

Press the CHANNEL UP

(▲) or DOWN (▼)button to

select TV channels.

Note: Always press two number

buttons on the remote when

selecting channels.

For example: press "0" then "6"

for channel 6.

REMOTE

BEGIN

STOP

Your LCD panel universal

remote is designed for

flexible adaptability and use.

Set to automatically work all

Marantz HD Projection TV

Menu system features, the

remote also has preset

“Device” operations for a

variety of Audio and Video

accessory products (such as

VCR, DVD, CD, Tape, etc.)

Although the remote’s prepro-

grammed operating codes

were set to work with

Marantz and Philips branded

products, other manufacturer’s

equipment can easily be con-

trolled through the remote’s

“Learn” mode capabilities.

The remote can also memo-

rize select key button

sequences in order to auto-

mate or “short-cut” a feature

function selection or process.

Once created and placed in

memory, the recorded

“MACRO” buttons will exe-

cute desired commands to

various components in order

to complete, for example, a

VCR movie playback on the

HD PTV or other similar pro-

cedure.

REMOTE LCD PANEL &

"SYSTEM" BUTTONS

POWER

SOURCE OFFON ON/OFF

CLONE MACRO MODE

LEARNING REMOTE CONTROL

RC-18SR

MACRO MACRO

VOLCH

LD DVD

AUX

TAPE

TUNER

CD-R

/MD

DSS/

VCR2

VCR1

MUTE

GUIDEAMP

Menu Select (D1) Button

Press the Menu (D1) button to select the

TV’s Menu screen or highlighted feature

control. Note: You can also use the remote’s

OK and arrow buttons to select and access

Menu controls. The arrow buttons move up

and down (or left and right) through the list

of onscreen controls. The center OK button

selects the highlighted control.

Surf (D2) Button

Press to select previously viewed channels.

With the TV’s “Auto Surf” control ON you

can place up to 10 channels in memory. Then

by pressing the SURF button you can quickly

view the select channels.

See the "Auto Surf" section (in your other

owner's manual) to see how to select a series

of channels using the Surf button.

A/V (D3) Button

Press to quickly display the Auxiliary source

inputs on the TV (AUX1-5 VIDEO, etc.) as

well as Antenna A/B inputs.

Smart/Auto (D4) Button

Press to select from a list of Auto controls.

Auto Picture for factory preset picture con-

trol levels (set for different types of viewing

sources and programs.) Auto Sound to set

TV audio for more consistent volume pro-

gram levels even during commercial breaks.

Auto Surf to quickly select up to 10 chan-

nels (separate from the TV’s normal channel

scan memory). See the "Auto Features" sec-

tion in your other owner's manual for details.

Channel Scan Button

Press to scan up (▲) or down (▼) through

programmed channel numbers.

Number Buttons

Press the number buttons to select TV chan-

nels. Press two number buttons to select sin-

gle digit channels. For example: press "0"

then "6" for channel 6.

M (100+) Button

Press to select channel numbers greater than

99 (by direct button entry). Press the “M”

button then the remaining two digits to select

the desired channel.

Clear Button

Press to Clear current control entries and

return the TV to Factory Settings.

AMP Button

Press to reset the remote’s LCD Display panel

for use with Amplifier device mode controls.

Note: You

can press any of the

TV’s front keyboard

buttons to turn the

TV ON, but the

Power button must

be used to turn the

set OFF (from the

TV’s local key-

board).

The tuned channel

number will always

briefly appear when

the TV is first

turned ON (and

with channel

changes.)

You can also press

the STATUS button

(on the TV or

remote) to see what

channel the TV is

ON.

SMART

HELP

Remote Sensor

Window

Press the HIGHLIGHTING

button to illuminate or light

the remote’s buttons to make

them easier to read and use

in dark room conditions. Power On/Off Buttons

Press the separate ON (OFF) buttons on the

remote to turn the TV ON and OFF. Press

the “Power Source” ON/OFF button to turn

the selected LCD Panel device (TV, VCR,

DVD, etc.) ON or OFF.

Status/Exit (D5) Button

Press to see current channel number infor-

mation on the TV screen.Also press to clear

the TV screen after control adjustments.

Sleep (D6) Button

Press to set the TV to automatically turn

itself Off. Press the Sleep button repeatedly

to select the amount of time (15 minutes to 2

hours) before the TV shuts Off.

VCR+ (D8) Button

Press to display Guide Plus+®electronic TV

program guide schedule. See dedicated

Guide Plus+ feature button callout and

explanation shown below.

LCD Panel System Buttons

Press to send remote signals to either the TV

or other accessory devices (VCR, DVD, etc.).

VCR (LCD Device) Buttons

For use with VCR (Play, Stop, Pause, FF,

etc.) type feature operations. In some cases,

may also function with select LCD Display

devices (i.e., DVD, CD, etc.) See the "Using

the Remote With a VCR" in your other

owner's manual for further details.

Volume Buttons

Press to adjust the TV sound level up (+) or

down (-).

OK/Menu and Arrow Buttons

Press the OK button to show onscreen

Menus and select highlighted controls. Press

the direction arrow buttons to move up and

down (or left and right) through the list of

onscreen controls.

Mute Button

Press to turn the sound OFF on the TV.

Press again to return the sound to its previ-

ous level.

GUIDE Plus+® Button

Press to use the GUIDE Plus+ system elec-

tronic guide for TV program listings. Refer

to your separate GUIDE Plus+ information

manual for setup and use details.

See the following page for further

details on the LCD Display Panel

and its TV related D1-D8 button

functions (contained within the

WIDETV Mode settings).

Note: Due to the amount of

optional components avail-

able within the remote’s

Device Reference and Learn

Code Lists, please refer to

the separate full-use Remote

Control Owner’s Manual

for complete details on its

functions and operations.

All manuals and user guides at all-guides.com

POWER

ON/OFF

OFF

CLONE MACRO MODE

LEARNING REMOTE CONTROL

RC-18SR

MACRO

DSS/

VCR2

TUNER CD

TAPE AUX CD-R

/MD

VCR1

VOL

AMP

GUIDE MUTE

VOL

STATUS/EXIT

VOL

STATUS/EXIT

MAIN MENU

PICTURE

FEATURES

SOUND

EXIT

COLOR

PICTURE MENU

SHARP

PICTURE

CLEARVIEW

EXIT

1 OF 2

TINT

MORE...

BRIGHT

EXIT NEXT...

MIN MAX

COLOR

1ST TIME SETUP

PIP

ON-SCREEN MENU CONTROLS

Features for your HD PTV

can be adjusted from a

MENU screen shown on the

TV. A MENU is nothing more

than an onscreen list of con-

trols. Each MENU item can

be adjusted by viewing the

screen and pressing a button.

FEATURE CONTROLS

MENUS

Press MENU on the

TV (or OK button on the

remote). An on-screen list of

TV features shows on the

screen - "MAIN MENU".

BEGIN

Press CH(annel) ▲ ▼

and VOL(ume) (+) (-) on the

TV to move UP/DOWN and

from SIDE-TO-SIDE within

the list of on-screen features.

The selected MENU item will

be highlighted in RED.

Press the remote's OK area

arrow buttons to move

UP/DOWN and from SIDE-

TO-SIDE within the list of

on-screen features.

Press (+) or (-) button

on the TV (or the OK

arrow buttons on the

remote) to adjust a selected

onscreen feature.

Press STATUS button

on the remote (D5 LCD

Display) or Status/Exit on the

TV to clear the screen after

an adjustment.

The screen can also be

cleared by selecting the Main

Menu's "EXIT" item and

pressing the MENU (OK)

button. Waiting about a

minute, without a button

press, will also remove the

MENU from the screen.

Press MENU on the

TV (or the OK button on the

remote) to select the RED

highlighted feature control.

NOTE: Many Main Menu

features have 2 or 3 screens

of controls listed under its

heading. Select the "MORE"

onscreen item and press the

MENU (M) button to view all

of the individual controls list-

ed under a Main Menu fea-

ture heading.

STOP

ON THE TV

ON THE REMOTE

SELECTED FEATURE CONTROL

HIGHLIGHTED IN RED

Select and then press

MENU (M) button to

return to previous Menu

screens.

Select and then press MENU

(M) button to view addition-

al controls grouped under

same feature heading. For

Example: Tint, Brightness,

Picture, etc.

If the

onscreen Menu dis-

appears and you are

not finished work-

ing with it, press the

MENU or OK but-

ton and the "Main

Menu" will return to

the screen. Continue

to press the MENU

or OK button and

the onscreen Menu

will advance until

you are returned to

the last feature con-

trol screen you had

selected.

SMART

HELP

REMOTE CONTROL OPERATION (CONTINUED)

POWER

SOURCE OFFON ON/OFF

CLONE MACRO MODE

LEARNING REMOTE CONTROL

RC-18SR

MACRO MACRO

VOLCH

LD DVD

AUX

TAPE

TUNER

CD-R

/MD

DSS/

VCR2

VCR1

MUTE

GUIDEAMP

The WIDETV Mode remote

contains four LCD display

screens of TV related Menu

controls. Use of these “TV”

Menu features are made with

the remote’s D1-D8 control

buttons. Features such as PIP

(Picture-In-Picture); Gemstar

(Guide Plus+® electronic

program guide); and Wide

Screen Format (Theater 1/2,

Zoom, etc.) are available for

selection and use with these

various display screen items.

WIDETV MENU CONTROLS

LCD DISPLAY

Note: The

LCD display panels

for other select cate-

gory products work

in much the same

manner as WideTV.

Press the LCD

System button to

select the desired

accessory (VCR,

etc.), then use the

screen arrow keys

to scroll through the

various control item

displays.

SMART

HELP

Mode 2 - Screen Format Buttons

Press to display the TV in various height-to-width screen display options or aspect ratio

controls (4x3 - Standard; Theater 1 & 2 - Zoom, etc.)

PIP Buttons

Press to operate Picture-In-Picture features (such as SWAP, FREEZE, POSITION, etc.).

See the “PIP” section in your other owner’s manual for further details.

GUIDE Plus+® (Gemstar) System Buttons

Press to use the GUIDE Plus+ electronic guide for TV program listings and infor-

mation. Refer to your separate GUIDE Plus+ information manual for setup and use

details.

Mode 1 - Menu TV Feature Buttons

As described on the previous page press the appropriate D1 - D8 button to display for use

select TV features (such as: Sleep, Surf,A/V, Smart, etc.)

NOTE: Press the LCD Panel direction arrows (< or > ) to move through the four separate

screens of WIDETV control features.

All manuals and user guides at all-guides.com

Other manuals for PV6080

Other Marantz HDTV manuals

Marantz

Marantz PV6480 User manual

Popular HDTV manuals by other brands

Vizio

Vizio M602i-B3 user manual

JVC

JVC LT-40C750 quick start guide

Pendo

Pendo PNDLFHU55 quick start guide

RCA

RCA RTU7575-B manual

Sharp

Sharp LC60LE830UN brochure

LEECO

LEECO uMax85 user manual

LG 50PC1DRA Specifications

Samsung

Samsung Tantus HCJ555W instruction manual

Sceptre

Sceptre X23 user manual

Medion

Medion LIFE P13901 user manual

Vizio

Vizio D32h-C0 user manual

JVC

JVC EM39T Specifications

Sceptre

Sceptre X460BV-FHD Specifications

BEA

BEA 49B4KUHD user manual

EQD

EQD Auria EQ3288 Specifications

JVC

JVC LT-24C660 instruction manual

RCA

RCA Scenium D32TF20 user guide

LG M3702C Specifications