Mapex MVBD-MPN User manual
MVBD-MPN marching bass drum carrier
ASSEMBLY INSTRUCTION
Step 1:
Fasten the bass drum attachment to the chest and
shoulder plates in the above order.
How to use the bass drum attachment:
Compress the spring to shorten the length of the attachment and insert one end into
one of the bass drum eye-bolts. Relax the spring to return the attachment to its natural
extended length, and allow the remaining end to slide into the unoccupied eye-bolt.
Tighten the wing nut for additional security.
For further information, please refer to the official MAPEX website. Ver. 2022.07
Step 2:
Fasten the belly plate to the chest plate
(J-Hook fixers should be already attached
to the belly plate).
Step 3:
Fasten back support plates to shoulder
plates.
Step 4:
Adjust width and angle of shoulder plates
to fit comfortably.
Step 5:
Adjust belly plate to suitable position.
Step 6:
Add belt (if required) & padding to the
belly, shoulder and back support plate.
The carrier is now ready for use.
Chest plate
Back support
Belly plate
Shoulder
plate
MAPEX Marching Vest Carriers
Assembly Manual
MVSD-MPN marching snare drum carrier
ASSEMBLY INSTRUCTION MVQD-MPN marching tenor drum carrier
ASSEMBLY INSTRUCTION
Step 1:
Fasten the chest plate to shoulder plates.
Step 2:
Fasten the belly plate to the chest plate
(J-Hook fixers should be already attached
to the belly plate).
Step 3:
Fasten back support plates to shoulder
plates.
Step 4:
Adjust width and angle of shoulder plates
to fit comfortably.
Step 5:
Adjust belly plate to suitable position.
Step 6:
Add belt (if required) & padding to the
belly, shoulder and back support plate.
The carrier is now ready for use.
Chest plate
Back support
Belly plate
Shoulder
plate
Padding
Belt
Padding
Free floating
snare attachment
Step 1:
Fasten the chest plate to shoulder plates.
Step 2:
Fasten the belly plate to the chest plate
(J-Hook fixers should be already attached
to the belly plate).
Step 3:
Fasten back support plates to shoulder
plates.
Step 4:
Adjust width and angle of shoulder plates
to fit comfortably.
Step 5:
Adjust belly plate to suitable position.
Step 6:
Add belt (if required) & padding to the
belly, shoulder and back support plate.
The carrier is now ready for use.
Chest plate
Back support
Belly plate
Shoulder
plate
Padding
Belt
Padding
Other Mapex Drum manuals
