Manhattan 178501 User manual

COMPUTER

POWER

SUPPLY

USER

MANUAL

Models: 178501,

178518, 178525,

178532, 178549

MAN-CPSGP2-UM-0608-02

Shown: Model 178501

Thank you for your purchase of this MANHATTAN®Computer Power

Supply. With the simple steps below for installation, you’ll soon be able

to enjoy the benets of the following features.

• A steady, safe and reliable power source

• Convenient switch selects 115 V or 230 V power input

• Internal fan delivers quiet and efcient cooling

• Short circuit protection prevents power sag and spike damage

• Multiple built-in connectors allow quick, easy peripheral installation

without adapters (including PCI-E on select models)

• Power factor correction (PFC) reduces environmental interference

with nearby electrical devices

• Lifetime Warranty

Safety Precautions

For safety, unplug your PC from the AC outlet before you remove your

old power supply. While power supplies are built with safety in mind,

they can deliver a potentially life-threatening shock. The best way to

avoid this is to rst unplug the three-prong electrical connector from the

wall and then unplug the electrical connector from the power supply.

Replacement

1. Detach all external components; then remove the old power supply.

2. Open the case to begin removing the old power supply. (You may want

to consult your computer owner’s manual for details.)

3. Remove all attached power connections to the motherboard.

4. Once the cables from the power supply to the motherboard are

disconnected, disconnect the cables that attach peripheral devices

(CD drives, hard drives, etc.). NOTE: Cables connecting the motherboard

to other peripherals in your computer, such as the ribbon cables, do

not need to be removed.

5. Remove the power supply from the PC case (removing the screws on

the back). Once the old unit is out, simply reverse this process to install

by slipping the new unit in its place, attaching it and reattaching the

connectors. NOTE: The power supply will come out of your computer

encased in a steel or aluminum box. Do not take apart the power supply

itself. The possibility of a shock from an unplugged power supply is

remote, but it does exist, especially if you remove the protective cover.

New Installation

For a new installation, simply reverse the Replacement steps and:

1. Keep the power supply unplugged until it is ready to be tested.

2. Always refer to your motherboard documentation for plug details.

Specications

Standards & Certications

• UL; FCC; ATX 12 V 2.0

External Ports

• Input power w/ power switch

Internal Connections

• 4 Molex 4-pin (5 for Model

178549)

• ATX 20+4 pin

• 12 V 4-pin auxiliary power

• FDD (oppy disk drive) 4-pin

• 2 SATA power 15-pin

• PCI-E 6-pin (Models 178525,

178532 & 178549 only)

• Voltage (min./max. load):

- Model 178501: +5 V (0.5 A /

18 A), +12 V1 (1 A / 10 A),

+12 V2 (1 A / 10 A), -12 V (0

A / 0.3 A), +3.3 V (0.3 A / 19

A), +5 VSB (0 A / 2.5 A)

- Models 178518: +5 V (0.5 A

/ 18 A), +12 V1 (0.5 A / 12

A), +12 V2 (0.5 A / 12 A), -12

V (0 A / 0.3 A), +3.3 V (0.3 A

/ 21 A), +5 VSB (0 A / 2.5 A)

- Model 178525: +5 V (0.5 A /

18 A), +12 V1 (1 A / 15 A),

+12 V2 (1 A / 15 A), -12 V (0

A / 0.3 A), +3.3 V (0.3 A / 21

A), +5 VSB (0 A / 2.5 A)

- Model 178532: +5 V (0.5

A / 20 A), +12 V1 (1 A / 17

A), +12 V2 (1 A / 17 A),

-12 V (0 A / 0.3 A), +3.3 V

(0.3 A / 24 A), +5 VSB (0

A / 2.5 A)

- Model 178549: +5 V (0.5

A / 28 A), +12 V1 (1 A / 16

A), +12 V2 (1 A / 17 A),

-12 V (0 A / 0.3 A), +3.3 V

(0.3 A / 30 A), +5 VSB (0

A / 3 A)

Power Input

• Voltage: 104–127 V AC

(nom. 115 V) ; 207–253 V AC

(nom. 230 V)

• Wattage:

- Model 178501: 255 W

- Model 178518: 305 W

- Model 178525: 355 W

- Model 178532: 405 W

- Model 178549: 500 W

• Frequency: 47–63 Hz

• Current (max):

- Models 178501, 178518,

178525, 178532: 115 V 4 A /

230 V 2 A

- Model 178549: 115 V 10 A /

230 V 5 A

• Max. inrush current: 100 A

cold start

Power Regulation

• Line regulation: +/- 1%

• Load regulation: +/- 5%

(-12 V +/- 10%)

• Ripple and noise:

- Models 178501, 178518,

178525, 178532: +3.3 V /

50 mV, +5 V / 50 mV, +12

V1 / 120 mV, +12 V2 / 120

mV, -12 V / 120 mV, +5

VSB / 50 mV

- Model 178549: +3.3 V / 50

mV, +5 V / 50 mV, +12 V1 /

100 mV, +12 V2 / 100 mV,

-12 V / 100 mV, +5 VSB /

50 mV

• Efciency: 70% (min.) at

full load

Physical

• 120 mm internal fan (80 mm

on Models 178501 & 178518)

• Dimensions: 150 x 140 x 86

mm (6 x 5.5 x 3.5 in.)

• Weight:

- Models 178501, 178518,

178532, 178549:

1.54 kg (54.4 oz.)

- Model 178525: 1 kg

(35.0 oz.)

Environmental

• Operating temp.: 0–40˚C

(0–105˚F)

• Storage temp.: -20–70˚C

(-20–158˚F)

• Storage humidity: 5–95%

non-condensing

Package Contents

• Computer Power Supply

• User manual

All products mentioned are trademarks or registered trademarks of their respective owners.

www.manhattan-products.com

MANHATTAN®offers a complete line

of PC Components, Peripherals, Cables and Accessories.

Ask your local computer dealer for more information

or visit us online at

This manual suits for next models

Table of contents

Other Manhattan Power Supply manuals

Manhattan

Manhattan 168205 User manual

Popular Power Supply manuals by other brands

Monacor

Monacor PS-12CCD instruction manual

VOLTIMA

VOLTIMA MagicBox 15 Installation and operating instructions

Agilent Technologies

Agilent Technologies 6032A Service manual

Miller

Miller Auto Deltaweld 452 owner's manual

BCP

BCP PUOUBK How to install

HC 2210 manual

Puls

Puls CT5.241 installation manual

OCZ

OCZ ZX1250W Technical specifications

iseg

iseg ECH 238 manual

Power

Power XXL A Series instruction manual

Agilent Technologies

Agilent Technologies 6631B Service manual

Renogy

Renogy PHOENIX 300 user guide

HP 6200B Operating and service manual

Epson

Epson Stylus Scan 2500 Product information sheet

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 manual

Puls

Puls MiniLine ML50.100 instruction manual

Puls

Puls AS-Interface SLA4.100 installation manual

Kenwood

Kenwood PS-60 instruction manual