Manhattan 702775 User manual

MULTI-CARD

READER

WITH BUILT-IN

MULTI-MEDIA PANEL

USER

MANUAL

Model 702775

MAN-702775-UM-0308-01

Thank you for purchasing the MANHATTAN

Multi-Card Reader with

Built-In Multi-Media Panel, Model 702775.

Compatible with most card formats (see Specications), this handy device

lets you easily download and transfer digital images without having to

directly connect the camera or other media device to the computer.

The easy-to-follow instructions in this manual help make installation of

the card quick and simple, so you’ll also soon be enjoying the benets

of these features:

• Convenient front-mount USB, FireWire, microphone and audio ports

• Supports Automatic Card Detection and data transfer speeds up to

480 Mbps

• Windows and Mac compatible; hot swappable; Plug and Play

• Lifetime Warranty

HARDWARE INSTALLATION

NOTE: The position and labeling of USB and other connector ports vary

among computer brands, which may require that you reference the

motherboard specications for clarication. Otherwise, use the images

and wire chart below for guidance.

1. Connect the

included cables to

the card reader.

(Each of the three

connections on the

reader will t only

the corresponding

cable connector.)

2. Mount the reader

into an available

5.25” bay, using

the included screws to secure it in place.

3. Install the included bracket on the back of the computer chassis.

4. Pull the FireWire and audio cables through the bracket and plug them in

to the corresponding ports on the back of the system.

5. Once the multi-card reader

has been connected, turn

on the computer and install

the driver (for Windows

98SE only) as directed

below. For Me/2000/XP/

Vista, go to Conguration.

Right: Examples of how different

computer manufacturers may

label connectors corresponding

to specic cable wires. Also

shown is a typical dual-head

USB connection found on the motherboard.

NOTE: Normally, the connectors are labeled

on the board; if not, contact the manufacturer.

DRIVER INSTALLATION

NOTE: This procedure is for Windows 98SE only. For computers with

Windows Me/2000/XP/Vista, no additional driver installation is needed:

Go to Conguration.

1. When the card reader is

connected to a PC using

Windows 98SE before the

driver is installed, the Add

New Hardware Wizard

screen displays.

Click “Cancel.”

2. Insert the included

driver CD; then, in

the root directory,

double-click “AM_

Reader_98Drv_

Setup” to install the

driver.

Wire Connector Label

Red, orange POWER, VCC, SVCC, +5V

White, yellow P–, DATA–, SBD–

Green, gray P+, DATA+, SBD+

Black, blue, brown GROUND, GRND, GND

1 97

3. Click “Multi-Media Panel”; click “USB 2.0 Multimedia Panel (USB +

Cardreader)”; click “USB 2.0 Cardreader (Alcor)”; then select the

Windows folder.

4. An “InstallShield Wizard Complete” message will display to indicate

the driver has been properly installed and that a reboot is required.

Click “Finish” to wrap up the procedure.

CONFIGURATION

With the Multi-Card Reader connected, there will be four Removable Disk

icons displayed. The disk drive letters (F:, G:, H: & I:, as shown in the

sample image) are determined by the PC’s conguration, which can vary;

however, the sequence of the removable disk drives is xed: SD family

(SD/MMC) rst, CF/MD second, SM third, MS Family (MS/MS Pro) fourth.

NOTE: Windows presents the option of installing a disk icon utility, which

replaces the generic Removable Disk icons with card-specic ones.

1. Click on the Icon AP folder; click “AU6375 AP V1.23(PID6362)support

Multi_language”

to install the

utility.

2. Click through

the subsequent

status screens.

3. When the

InstallShield

Wizard Complete

screen displays,

select “Yes, I

want to restart

my computer

now.” Click

“Finish.”

OPERATING TIPS

• This Multi-Card Reader is a USB device designed to work under bus-

power mode; i.e., the power is drawn from a USB port and no power

adapter is required. Though a full 500 mA can be drawn from the USB

host to supply the card reader, during the initial enumeration stage only

100 mA from the host is available. To expedite and ensure the correct

USB enumeration process between the computer and the card reader,

it’s recommended that the card reader not be connected with cards

inserted in all four of the available slots.

Windows

98/Me/2000

disk icons:

Windows

XP/Vista

disk icons:

• In addition to showing the four

Removable Disk icons on the

Exploring – My Computer

screen, when correctly

connected, the Multi-Card

Reader should display a USB

Mass Storage Device icon in

the Hardware Device Manager

folder. If there’s no Removable

Disk icon displayed in the

explorer’s window and the USB

Mass Storage Device icon in

Hardware Device Manager is

shown with a question mark (?),

it means the driver is not

installed or not ready. If the

reader’s slots are full of cards

while connecting to the PC,

remove the cards and try again.

Or, follow the aforementioned

procedure to install the driver and icon utility.

• If there is no Removable Disk icon in the explorer’s window and the

USB Mass Storage Device icon in Hardware Device Manager is shown

with an exclamation mark (!) or just reads “Unknown Device,” it means

the reader is not recognized by the PC and may be defective. Disconnect

the reader from the PC and re-connect it (reboot the PC and try again).

If nothing changes, the card reader is defective.

• If there is no icon displaying, or if there is no response from the PC

once the card reader is connected, the USB host of the PC may not

be working. Reboot the PC and try again. If nothing changes, the USB

host on the motherboard needs repair.

• Whenever possible, use the Safely Remove Hardware icon (on the

lower-right corner of Window’s task bar in the system tray area) to

stop the USB device rst before detaching it from a PC. This will

protect both the USB device and the PC.

SPECIFICATIONS

Supports

CompactFlash Type I/II, Extreme CF, Extreme III CF, Ultra II CF, CF

High Speed, XS-CF, CF Elite Pro, CF PRO I/II, CF Picture, CF Wa,

CF UltraX*, IBM and Hitachi Microdrive, MagicStore, Memory Stick,

Memory Stick PRO, Memory Stick Duo*, Memory Stick PRO Duo*,

Memory Stick Extreme PRO, Memory Stick Extreme III PRO, Memory

Stick Ultra II PRO, MagicGate, MagicGate PRO, MagicGate Duo*,

MagicGate PRO Duo*, High Speed MagicGate PRO, High Speed

MagicGate PRO Duo*, High Speed Memory Stick PRO, High Speed

Memory Stick PRO Duo*, Memory Stick ROM, Memory Stick Select,

SecureDigital (SD), miniSD*, High Speed miniSD*, miniSDHC*, SDHC,

Extreme SD*, Extreme III SD, Ultra II SD, Ultra-X SD, Ultra Speed

SD, Pro SD, Elite Pro SD, High Speed SD, microSD, TransFlash*,

MMC/MMC II, RS-MMC*, High Speed MMC/RS-MMC*, Ultra RS

MMC*, DV-RS MMC*, MMCplus/100x/200x, MCCmobile, SmartMedia,

SmartMedia ROM and XD/Type M/Type H

* Adapter required (not included)

General

• Drivers, cable, bracket with screws and manual included

• Compatible with Windows 98SE/2000/Me/XP/Vista and Mac OS 9.X

or later

• Compliant with USB Specication Revision 2.0 and USB 1.1

• 1394a FireWire port

• 121.9 g (4.3 oz); 570 x 400 x 310 mm (22.4 X 15.7 X 12.2 in.)

All products mentioned are trademarks or registered trademarks of their respective owners.

www.manhattan-products.com

MANHATTAN®offers a complete line

of PC Components, Peripherals, Cables and Accessories.

Ask your local computer dealer for more information

or visit us online at

Table of contents

Manhattan 702775 User manual

Popular Card Reader manuals by other brands