Makita LS800D Manual

TECHNICAL INFORMATION

For Models

Description

Product

CONCEPTION AND MAIN APPLICATIONS

Specifications

Optional accessories

LS800D

210mm (8-1/4") Cordless Miter Saw

LS800D is the 18V Cordless version of Model LS0810

(210mm Miter saw) developed for works at the site far from A/C supplies.

This model is equipped with Electric Brake for quick stop.

Vertical vise 1

Lock-off button(spare) 2

Dust bag 1

Chip saw blade 216 (40T) 1

Holder metal fittings 2

Battery Cover 1

Box wrench 10 1

Sub Plate Set 1

Set square(triangle) 1

Holder assembly

Horizontal vise

Set plate

Holder fitting set (for long stock)

Chip saw blade(various types)

Battery 1822(Ni-Cd,18V,2.0Ah)

Battery 1833(Ni-MH,18V,2.0Ah)

Fast charger DC1801

Motor

Battery

No load speed

Blade diameter

Arbor diameter

Net weight

DC 18V magnet motor

Battery 1822(Ni-Cd,18V,2.0Ah) for LS800DWA

2000 rpm.

210mm(8-1/4")-216mm(8-1/2")

30mm(1-3/16")

Europe

Other Countries 25.4mm(1")

9.3Kg(20.5lbs) including the weight of battery

528mm (20-3/4")

486mm (19-1/8")

430mm (17")

Battery 1833(Ni-MH,18V,2.2Ah) for LS800DWB

Charger used for this Model DC1801

Standard equipment

Electronc

features

for fixed cutting speed

for soft start No

Bevel Angle

Miter Angle left 45°- 0°

left 52°- right 52°

Cutting

Capacity

Bevel Angle Miter Angle

left 45°

0°0°

left and right 45°

0°

left and right 45°

61mm(2-3/8") x 122mm(4-13/16")

61mm(2-3/8") x 85mm(3-3/8")

45mm(1-3/4") x 122mm(4-13/16")

45mm(1-3/4") x 85mm(3-3/8")

(1)GREASE APPLICATION

Repair

Apply Makita grease on the following rotating/sliding surfaces before assembling.

Up/Down shaking fulcrum of Blade case, Arm, Rod 16-100

Arm rotation part: Arm, Sub arm,

L/R rotating support and sliding parts of Turn base: Turn base,

Boss in the center of base, Slide plate,

Rotating and Open/Close parts of Safety cover: Center plate,Spiral spring 26,Tip of Link plate

(2)ASSEMBLY/DISASSEMBLY OF BLADE CASE( Motor part in the body)

[Disassembly]

Remove Blade , Safety cover, and Dust nozzle before disassembling.

1) Bring the cutting unit (motor section) to the blocking point (top position), and then push Stopper pin in.

2) Remove Hex. socket head bolt M6 fixing Link plate , and loosen Hex. Nut M6x10 fixing Rod 16-100.

3) Gripping Blade case (Motor sectiont in the body) with hand, pull Stopper pin and raise the body slowly. Where Torsion

spring 28 does not work, pull Rod 16-100 and take off Blade case from Arm.

[Assembly]

Reverse procedure of disassembly.

Blade Case

Stopper pin

Hex socket hed bolt M6

Rod 16-100

Part of Arm

Torsoin spring

Hex Nut M6 x 10

(3)ASSEMBLY OF SAFETY COVER

1) Insert Spiral spring 26 into the oval hole in Safety cover , making spring's tip meet the hole.

2) Making Center washer meet four bosses in Safety cover , and attach it. (See Fig.1)

3) By putting the tip of Spiral spring 26 into Center cover hole, attach Center cover as shown in Fig. 2.

4) Attach Center plate, making it meet four bosses in Safety cover, and tighten it with Pan head screw M5.

Oval hole in Safety cover Spiral spring 26

Flat washer 5

Pan head screw M5

Spiral spring 26 Center cover hole

Center washer

Center plate

Center cover

Fig. 1 Fig. 2

(5) Fastrening of Hex bolt M8 on teh Turn Base

Hex Lock Nut M8 has to be so fastened that the turn base can move smoothly without trembling.

Hex. lock nut M8 Turn base

Base

Lock lever

Hex. lock nut M8 Turn base

Base

Lock lever

Safety Cover

(6)ASSEMBLY OF POSITIVE LOCK UNIT ON TURN BASE

When Lock pin is located in the groove on the turn base, lock pin has to be so installed that

it stand out from the support plate by 2mm - 3mm.

(7)ASSEMBLY OF ARM

1) Adjust torque of Hex. lock nut M10-17 so that Arm may slide smoothly without trembling.

2) Attach Lever 100 that fixes Arm so that it is placed in the position as in the figure when Arm is fixed.

(8)ADJUSTMENT OF THE STRENGTH OF TORSION SPRING 28

Adjust the strength of Torsion spring 28 by tightening/loosening Hex. socket head bolt M6x10

so that the cutting head may return to the top dead center smoothly from any position.

Support plate

To be adjusted with this screw

Lock pin

Lever 100

Hex. socket head bolt M6x10 Torsion spring 28

Lock lever

approx.45°

2mm - 3mm

Hex Nut M6 x 10

Arm

Switch

White Red

Insulated

connector

Black Black

Black

Terminal(+)

Terminal(-)

Brush holer

Battery holder

Circuit diagram

Lead wire has to be nonnectee as below.

Interchangeability

The following spare parts have an interchangeability with the existing models.

Section Spare parts The existing model No.

Gears Spindle LS0711

Lever 100 LS1012, LS1013

Arm Hex Nut M10 - 7 LS0711,

Hex Lock Nut M10-17 LS1212

Turn base Hex Lock Nut M8 - 13 LS1040, LS0711

Spiral spring 26 LS0810, LS0711

Safety Covre Screw M5 LS1012, LS1013, LS1212, LS0711

LS1030

Center Washer LS07011

Cap 20, Adjust Screw M6x10, Switch buton LS1012, LS1212, LS0711

Dust nozzle, O Ring 35, O Ring 5, LS1012, LS1013, LS0711

Other Section Stopper Pin, Knob, Grip 32 LS1030

Lock Off Lever LS0711

Pin 5 LS0711, LS1030

Other manuals for LS800D

Table of contents

Popular Saw manuals by other brands

RIDGID

RIDGID BS1400 owner's manual

ATIKA

ATIKA BWS 400-2 Original instructions

RGC

RGC FS20 instructions

IMET Spa

IMET Spa BASIC 300 PLUS SHI Instructions for use

IMET Spa

IMET Spa SIRIO 370 AF-E User instructions

Optimum

Optimum OPTisaw CS 275 operating manual

Stihl

Stihl MS 462 C-M instruction manual

AEG

AEG TS 250 K Original instructions

Meec tools

Meec tools 004665 operating instructions

Ryobi

Ryobi RCS1400 Original instructions

DeWalt

DeWalt DCS391 instruction manual

Sealey

Sealey SA72 instructions

skilsaw

skilsaw SPT88 Operating/safety instructions

Urrea

Urrea SI810 User manual and warranty

EINHELL

EINHELL BKG 210/1 operating instructions

Altrad

Altrad BELLE RANGER 450 Operator's manual

Porter-Cable

Porter-Cable 725 instruction manual

Rockwell

Rockwell RK7241S manual