Makita 9035 User manual

A AA

Pad size

x 185

(3-518”

7-114”)

Finishing

No load speed Overall length Net weight

10,000 Rimin

236

114”)

Ibs)

Sander

MODEL

9035

INSTRUCTION MANUAL

DOUBLE

INSUL

ATlOly

SPEC

CAT

IONS

IMPORTANT

SAFETY INSTRUCTIONS

(For

All Tools)

WARNING:

WHEN USINGELECTRICTOOLS, BASICSAFETY

PRECAUTIONSSHOULD ALWAYS BE FOLLOWEDTO REDUCE

THE RISK OF FIRE, ELECTRIC SHOCK, AND PERSONAL

INJURY, INCLUDING THE FOLLOWING:

READ

ALL

INSTRUCTIONS.

KEEP WORK AREA CLEAN. Cluttered areas and benches invite injuries.

CONSIDER WORK AREA ENVIRONMENT. Don't use power tools in damp

or wet locations. Keep work area well

lit.

Don't expose power tools torain.

Don't use tool

presence of flammable liquids or gases.

KEEP CHILDREN AWAY. All visitors should be kept away from work area.

Don't let visitors contact tool or extension cord.

STORE IDLETOOLS. Whennotinuse,

tools

should bestored

dry, and high

or locked-up place

out of reach of children.

DON'T FORCETOOL.

willdothejob betterandsafer atthe ratefor which

was intended.

USE RIGHT TOOL. Don't force small tool or attachment to do the job of a

heavy-dutytool. Don't usetoolfor purpose notintended; for example, don't

use circular saw for cutting tree limbs or logs.

DRESSPROPERLY. Don't wear loose clothingorjewelry. They canbecaught

in moving parts. Rubber gloves and non-skidfootwear are recommended

when working outdoors. Wear protectivehair covering

contain long hair.

USE SAFETY GLASSES. Also use face or dust mask

cutting operation is

dusty.

DON'T ABUSE CORD. Never carry tool by cord or yank

todisconnect from

receptacle. Keep cord from heat, oil, and sharp edges.

IO.

SECURE WORK. Use clamps or a vise to hold work. It's safer than using

your hand and

frees both hands to operate tool.

11.

DON'T OVERREACH. Keep proper footing and balance at all times.

12.

MAINTAINTOOLS

WITH

CARE. Keep tools sharp and clean for better and

safer performance. Follow instructionsfor lubricatingand changing acces-

sories. Inspecttoolcords periodicallyand

damaged, haverepairedbyautho-

rized service facility. Inspect extension cords periodically and replace

damaged. Keep handles dry, clean, and free from oil and grease.

13.

DISCONNECTTOOLS. When not inuse, before servicing, and when chang-

ing accessories, such as blades, bits, cutters.

14.

REMOVE ADJUSTING KEYS

AND

WRENCHES. Form habit of checking to

see that keysand adjusting wrenches are removed from tool before turning

on.

15. AVOID UNINTENTIONALSTARTING. Don‘t carry toolwithfinger onswitch.

Be sure switch is

OFF

when plugging

in.

16. EXTENSION CORDS. Make sure your extension cord is

good condition.

When using an extension cord, be sure to use one heavy enough to carry

the

current your product will draw. An undersized cord will cause a drop

inline voltage resulting in

loss

of power and overheating. Table 1 showsthe

correct size touse depending oncordlengthand nameplateampere rating.

If in doubt, use the next heavier gage. The smaller the gage number, the

heavier the cord.

TABLE

MINIMUM

GAGE

FOR

CORD

SETS

Ampere Rating

More Not More

Than Than

Total Length of Cord in Feet

25 26

50 51

100

101

150

AWG

18 16 14

16 16 14 12

Not Recommended

18 16

17. OUTDOOR USE EXTENSIONCORDS. Whentoolisusedoutdoors, use only

extension cords intended for use outdoors and

marked.

18.

STAY ALERT. Watch what you are doing, use commonsense. Don’t operate

tool when you are tired.

19. CHECK DAMAGEDPARTS. Before further use of the tool, a guard or other

part that is damaged should be carefully checked to determine that

will

operate properly and performitsintended function. Check for alignment of

movingparts, bindingof movingparts, breakage

parts, mounting, and any

other conditionsthat may affect its operation. A guard or other part that

is damaged should be properly repaired or replaced by an authorized serv-

icecenter unless otherwise indicatedelsewhere inthis instruction manual.

Have defective switches replaced by authorized service center. Don’t use

tool if switch does not turn

on and off.

20.

GUARD AGAINST ELECTRIC SHOCK. Preventbody contact withgrounded

surfaces. For example; pipes, radiators, ranges, refrigerator enclosures.

REPLACEMENTPARTS. Whenservicing, useonly identical replacementparts.

22. POLARIZEDPLUGS. To reduce the risk of electric shock, this equipment has

a polarized plug (one blade is wider than the other). This plug will fit in a

polarized outlet only one way.

the plug does not fit fully in the outlet,

reversethe plug. If

stilldoes not

fit,

contact aqualifiedelectriciantoinstall

the proper outlet. Do not change the plug in any way.

VOLTAGE WARNING: Before connectingthe tooltoa power source (receptacle,

outlet, etc.) be sure the voltage supplied is the same as that specified on the

nameplate of the tool. A power source with voltage greater than that specified

for the tool can result in SERIOUS INJURY to the user

well as damage to

the tool. If in doubt,

NOT PLUG

THE TOOL. Usinga power source with

voltage less than the nameplate rating

harmful to the motor.

ADDITIONAL SAFETY RULES

Hold the tool firmly with both hands.

not leave the tool running. Operate the tool only when hand-held.

This tool has not been waterproofed,

do not use water on the working

surface.

SAVE THESE INSTRUCTIONS.

Attaching

the

abrasivepaper

Pull out the clamp lever and insert the

paper end. Be careful to maintain the

proper paper tension. Align edges of paper

with either edge of the pad. (Prebending

the paper makes attachment easier.) Once

the paper

inplace, return the clamp lever

its

original position.

After inserting the paper, make sure the

teeth of the clamper hold

securely.

Otherwise the paper will be loose and sub-

ject toslippage, resulting in uneven sanding

operation.

Switch action

start the tool, simply pull the trigger.

Release the trigger tostop.

For

continuous

operation, pull the trigger and then push

in the lock button.

stop the tool from

the locked position, pull the trigger fully,

then release

it.

Clamp

lever

CAUTION

Before plugging in the tool, always check to

see

that the trigger switch actuates properly

and returnstothe

"OFF"

position when released.

Operation

A finishing sander

generally used to re-

move only

small amount of material

time. Since the quality of the surface

more important than the amount of stock

removed, do not bear down on the sander.

Keep the base flush with the material

all

times. Undue pressure may damage the

paper and shorten tool life.

CAUTION

not block motor vent with your finger

or hand.

*Never run the tool without paper. You

may seriously damage the pad.

You can put

high polish on furniture or

other fine surfaces by using

cloth under

the sander.

MAINTENANCE

CAUTION

Always be sure that the tool

switched offand unpluggedbefore attempting toperform

inspectionand maintenance.

To maintain product SAFETY and RELlABlLITY, repairs, carbon brush inspection and

replacement, any other maintenance or adjustment should be performed

Makita

Authorized or

Factory

Service Centers, always using Makita replacement parts.

ACCESSORIES

CAUTION

These accessories or attachments are recommended for use with your Makita tool specified in

this

manual. The use

any other accessories or attachments might present a risk

injury to persons.

The accessories

attachmentsshould

used

only

the

properand intendedmanner.

Abraisve papers

Grit

,~~

Part

No.

Use

Sheets,p;r pack

150

742508-5

Fine

742506-9 Coarse

742507-7 Medium

Nov-30-'84

Note: The switch. noise suppressor and other part configurations

may differ

from

country to country

MODEL

9035

Sep.-29-'07

'Ft

$.D

DESCRIPTION

'i%M

$tD

DESCRIPTION

MACHINE

___

Makita Label

Housing Set IWith

Item

Rubber

Ball

Bearing 627LLB

Carbon Brush

Brush Holder

Switch

Pan

Head

Screw

M4x30 IWith Washerl

Rivet

0-5

Name

Plate

Rubber

Ball

Bearing 6201LLB

Flat Washer 12

ARMATURE ASSEMBLY

IWith Item 4 12

141

Pan

Head

Screw

M4x18 IWith Washerl

MACHINE

Strain

Relief

Cord Guard

Cord

Sponge Sheet

FIELD ASSEMBLY

Fan

Ball

Bearing 6201DDU

Flat

Washer 7

Countersunk Head

Screw

M5x12

Base

Fool

Clamper

Pan

Head

Screw

M4x10 IWith Washell

Housing Set IWith Item 21

Note The switch

and

other part

SPeCIfIcatmns

may

differ

from

country to country

MAKITA

LIMITED

ONE

YEAR

WARRANTY

Warranty

Policy

Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted

be free of defects from worhanshipand materials for the period of ONE YEAR from the date of

origmal purchase. Should any trouble develop during this one-year period,

return

the COMPLETE

tool, freight prepiud, to

one

of Makitz’s Factory

Authorized Service Centers. If inspection

shows

the trouble

caused

by defective workmanship

material, Makita

will

repair

(or

OYI

option,

replace) without charge.

This

Warranty does not apply where:

repairs have been made

attempted by othen:

repurs

are

required

because

normal

wear

and

tear:

The

tool

has been abused, misused or improperly maintained;

alterations have

been

made to the tool.

IN NO EVENT SHALL MAKITA BE LIABLE FOR ANY INDIRECT, INCIDENTAL

CON-

SEQUENTIAL DAMAGES FROM THE SALE

USE OFTHE PRODUCT. THIS DISCLAIMER

APPLIES BOTH DURING AND AFTER THE TERM OFTHIS WARRANTY.

MAKITA DISCLAIMS LIABILITY FOR ANY IMPLIED WARRANTIES, INCLUDING IMPLIED

WARRANTIES OF “MERCHANTABILITY” AND “FITNESS FOR A SPECIFIC PURPOSE,”

AFTER

THE

ONE-YEAR

TERM

mis

WARRANN.

This Warranty

@ves

you specific

1eg.l

rights,

and you may

also

have other rights which vary from

state to state. Some states do not allow the exclusion or Limitation of incidental

consequenttal

damages,

the above limitation

exclusion may not apply to you. Some states do not allow

limitation

how

long

implied warranty lasts,

the above Limitation may not apply

you.

Makita Corporation

3-11

-8,

Sumiyoshi-cho,

Anjo, Aichi

446

Japan

883323B061

PRINTED

JAPAN

1995

-3

Other manuals for 9035

Table of contents

Popular Sander manuals by other brands

Oliver

Oliver 6305 owner's manual

Jet

Jet 22-44 Pro-3 Operating instructions and parts manual

Craftsman

Craftsman 351.215131 Operator's manual

Clarke

Clarke Woodworker CBS1-5B Operation & maintenance instructions

Chicago Pneumatic

Chicago Pneumatic CP9778 Operator's manual

Nitto Kohki

Nitto Kohki BB-20 instruction manual

Ferm

Ferm FEOS-135 user manual

Unior

Unior 1510 Operating instruction

stayer

stayer ls1200 operating instructions

Jet

Jet JSG-96 Operating instructions and parts manual

Parkside

Parkside PDS 290 B2 Operation and safety notes

Status

Status XPA Series Original instructions

Clarke

Clarke EZ Sand Operator's manual

Craftsman

Craftsman 113.22521 owner's manual

Craftsman

Craftsman 113.225831 owner's manual

CLAS

CLAS OP 1429 manual

Parkside

Parkside PEXS 270 Al user guide

Flex

Flex ST 1005 VE operating instructions