Makita UP100D User manual

UP100D

EN Cordless Pruning Shears INSTRUCTION MANUAL 7

ZHCN 充电式果树剪使用说明书 17

ID Pisau Pemangkas Tanpa

Kabel PETUNJUK PENGGUNAAN 27

MS Ricih Pemangkas Tanpa Kord MANUAL ARAHAN 38

VI Máy Cắt Cành Cầm Tay Hoạt

Động Bằng Pin TÀI LIỆU HƯỚNG DẪN 49

TH   59

Fig.1

Fig.2

Fig.3

Fig.4

Fig.5

Fig.6

Fig.7

Fig.8

Fig.9

Fig.10

Fig.11

Fig.12

Fig.13

Fig.14

Fig.15

Fig.16

Fig.17

Fig.18

Fig.19

Fig.20

Fig.21

Fig.22

Fig.23

Fig.24

Fig.25

Fig.26

Fig.27

Fig.28

Fig.29

Fig.30

Fig.31

Fig.32

Fig.33

Fig.34

7ENGLISH

ENGLISH (Original instructions)

SPECIFICATIONS

Model: UP100D

Max. cutting capacity 25 mm

Overall length

(Without battery)

259 mm

Rated voltage D.C. 10.8 V - 12 V max

Net weight *1 0.68 kg

*2 0.89 - 1.1 kg

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

without notice.

• Specicationsmaydi󰀨erfromcountrytocountry.

*1:Weightwithoutthebatteryandholster.

*2:Thelightestandheaviestcombinationofweight,accordingtoEPTA-Procedure01/2014.Theweightmaydi󰀨er

dependingontheattachment(s),includingthebatterycartridge(s).

Applicable battery cartridge and charger

Battery cartridge BL1016/BL1021B/BL1041B

Charger DC10SA/DC10SB/DC10WC/DC10WD/DC18RE

• Someofthebatterycartridgesandchargerslistedabovemaynotbeavailabledependingonyourregionof

residence.

WARNING: Only use the battery cartridges and chargers listed above.Useofanyotherbatterycartridges

andchargersmaycauseinjuryand/orre.

Symbols

Thefollowingsshowthesymbolswhichmaybeused

fortheequipment.Besurethatyouunderstandtheir

meaningbeforeuse.

Take particular care and attention.

Readinstructionmanual.

Danger;beawareofthrownobjects.

Keepbystandersaway.

DANGER-Keephandsawayfromblade.

Donotexposetomoisture.

Ni-MH

Li-ion

OnlyforEUcountries

Duetothepresenceofhazardouscom-

ponentsintheequipment,wasteelectrical

andelectronicequipment,accumulators

andbatteriesmayhaveanegativeimpact

on the environment and human health.

Donotdisposeofelectricalandelectronic

appliancesorbatterieswithhousehold

waste!

InaccordancewiththeEuropeanDirective

onwasteelectricalandelectronicequip-

mentandonaccumulatorsandbatteries

andwasteaccumulatorsandbatteries,

aswellastheiradaptationtonationallaw,

wasteelectricalequipment,batteriesand

accumulatorsshouldbestoredseparately

anddeliveredtoaseparatecollectionpoint

formunicipalwaste,operatinginaccor-

dancewiththeregulationsonenvironmen-

tal protection.

Thisisindicatedbythesymbolofthe

crossed-outwheeledbinplacedonthe

equipment.

Intended use

Thetoolisintendedforpruningtwigsorbranches.

8ENGLISH

SAFETY WARNINGS

General power tool safety warnings

WARNING Read all safety warnings, instruc-

tions, illustrations and specications provided with

this power tool.Failuretofollowallinstructionslisted

belowmayresultinelectricshock,reand/orserious

injury.

Save all warnings and instruc-

tions for future reference.

Theterm“powertool”inthewarningsreferstoyour

mains-operated(corded)powertoolorbattery-operated

(cordless)powertool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

darkareasinviteaccidents.

2. Do not operate power tools in explosive atmo-

spheres, such as in the presence of ammable

liquids, gases or dust.Powertoolscreatesparks

whichmayignitethedustorfumes.

3. Keep children and bystanders away while

operating a power tool.Distractionscancause

youtolosecontrol.

Electrical safety

1. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodiedplugsandmatchingoutletswill

reduceriskofelectricshock.

2. Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators.Thereisanincreasedriskofelec-

tricshockifyourbodyisearthedorgrounded.

3. Do not expose power tools to rain or wet con-

ditions.Waterenteringapowertoolwillincrease

theriskofelectricshock.

4. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges

or moving parts.Damagedorentangledcords

increasetheriskofelectricshock.

5. When operating a power tool outdoors, use an

extension cord suitable for outdoor use.Useof

acordsuitableforoutdoorusereducestheriskof

electricshock.

6. If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply.UseofanRCDreduces

theriskofelectricshock.

7. Power tools can produce electromagnetic

elds (EMF) that are not harmful to the user.

However,usersofpacemakersandothersimilar

medicaldevicesshouldcontactthemakeroftheir

deviceand/ordoctorforadvicebeforeoperating

thispowertool.

Personal safety

1. Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the inuence of drugs, alcohol or med-

ication.Amomentofinattentionwhileoperating

powertoolsmayresultinseriouspersonalinjury.

2. Use personal protective equipment. Always

wear eye protection.Protectiveequipmentsuch

asadustmask,non-skidsafetyshoes,hardhator

hearingprotectionusedforappropriateconditions

willreducepersonalinjuries.

3. Prevent unintentional starting. Ensure the

switch is in the o󰀨-position before connecting

to power source and/or battery pack, picking

up or carrying the tool.Carryingpowertoolswith

yourngerontheswitchorenergisingpowertools

thathavetheswitchoninvitesaccidents.

4. Remove any adjusting key or wrench before

turning the power tool on.Awrenchorakeyleft

attachedtoarotatingpartofthepowertoolmay

resultinpersonalinjury.

5. Do not overreach. Keep proper footing and

balance at all times.Thisenablesbettercontrol

ofthepowertoolinunexpectedsituations.

6. Dress properly. Do not wear loose clothing or

jewellery. Keep your hair and clothing away

from moving parts.Looseclothes,jewelleryor

longhaircanbecaughtinmovingparts.

7. If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used.Useof

dustcollectioncanreducedust-relatedhazards.

8. Do not let familiarity gained from frequent use

of tools allow you to become complacent and

ignore tool safety principles.Acarelessaction

cancausesevereinjurywithinafractionofa

second.

9. Always wear protective goggles to protect

your eyes from injury when using power tools.

The goggles must comply with ANSI Z87.1 in

the USA, EN 166 in Europe, or AS/NZS 1336

in Australia/New Zealand. In Australia/New

Zealand, it is legally required to wear a face

shield to protect your face, too.

It is an employer's responsibility to enforce

the use of appropriate safety protective equip-

ments by the tool operators and by other per-

sons in the immediate working area.

9ENGLISH

Power tool use and care

1. Do not force the power tool. Use the correct

power tool for your application. The correct

powertoolwilldothejobbetterandsaferatthe

rateforwhichitwasdesigned.

2. Do not use the power tool if the switch does

not turn it on and o󰀨.Anypowertoolthatcannot

becontrolledwiththeswitchisdangerousand

mustberepaired.

3. Disconnect the plug from the power source

and/or remove the battery pack, if detachable,

from the power tool before making any adjust-

ments, changing accessories, or storing power

tools.Suchpreventivesafetymeasuresreduce

theriskofstartingthepowertoolaccidentally.

4. Store idle power tools out of the reach of chil-

dren and do not allow persons unfamiliar with

the power tool or these instructions to operate

the power tool.Powertoolsaredangerousinthe

handsofuntrainedusers.

5. Maintain power tools and accessories. Check

for misalignment or binding of moving parts,

breakage of parts and any other condition that

may a󰀨ect the power tool’s operation. If dam-

aged, have the power tool repaired before use.

Manyaccidentsarecausedbypoorlymaintained

powertools.

6. Keep cutting tools sharp and clean.Properly

maintainedcuttingtoolswithsharpcuttingedges

arelesslikelytobindandareeasiertocontrol.

7. Use the power tool, accessories and tool bits

etc. in accordance with these instructions, tak-

ing into account the working conditions and

the work to be performed.Useofthepowertool

foroperationsdi󰀨erentfromthoseintendedcould

resultinahazardoussituation.

8. Keep handles and grasping surfaces dry,

clean and free from oil and grease.Slippery

handlesandgraspingsurfacesdonotallowfor

safehandlingandcontrolofthetoolinunexpected

situations.

9. When using the tool, do not wear cloth work

gloves which may be entangled. The entangle-

mentofclothworkglovesinthemovingpartsmay

resultinpersonalinjury.

Battery tool use and care

1. Recharge only with the charger specied by

the manufacturer.Achargerthatissuitablefor

onetypeofbatterypackmaycreateariskofre

whenusedwithanotherbatterypack.

2. Use power tools only with specically desig-

nated battery packs.Useofanyotherbattery

packsmaycreateariskofinjuryandre.

3. When battery pack is not in use, keep it away

from other metal objects, like paper clips,

coins, keys, nails, screws or other small metal

objects, that can make a connection from one

terminal to another.Shortingthebatterytermi-

nalstogethermaycauseburnsorare.

4. Under abusive conditions, liquid may be

ejected from the battery; avoid contact. If con-

tact accidentally occurs, ush with water. If

liquid contacts eyes, additionally seek medical

help.Liquidejectedfromthebatterymaycause

irritationorburns.

5. Do not use a battery pack or tool that is dam-

aged or modied.Damagedormodiedbatteries

mayexhibitunpredictablebehaviourresultingin

re,explosionorriskofinjury.

6. Do not expose a battery pack or tool to re or

excessive temperature.Exposuretoreortem-

peratureabove130°Cmaycauseexplosion.

7. Follow all charging instructions and do not

charge the battery pack or tool outside the

temperature range specied in the instruc-

tions.Chargingimproperlyorattemperatures

outsidethespeciedrangemaydamagethe

batteryandincreasetheriskofre.

Service

1. Have your power tool serviced by a qualied

repair person using only identical replacement

parts.Thiswillensurethatthesafetyofthepower

toolismaintained.

2. Never service damaged battery packs.Service

ofbatterypacksshouldonlybeperformedbythe

manufacturerorauthorizedserviceproviders.

3. Follow instruction for lubricating and chang-

ing accessories.

Pruning shears safety warnings

1. Do not use the pruning shear in bad weather

conditions, especially when there is a risk of

lightning.Thisdecreasestheriskofbeingstruck

by lightning.

2. Keep all power cords and cables away from

cutting area.Powercordsorcablesmaybe

hidden and can be accidentally cut by the blade.

3. Hold the pruning shear by insulated gripping

surfaces only, because the blade may contact

hidden wiring.Bladescontactinga“live”wire

maymakeexposedmetalpartsofthepruning

shear“live”andcouldgivetheoperatoranelectric

shock.

4. Keep all parts of the body away from the blade.

Do not remove cut material or hold material to

be cut when blades are moving.

5. When clearing jammed material or servicing

the pruning shear, make sure the power switch

is o󰀨 and the battery pack is removed or dis-

connected.Unexpectedactuationofthepruning

shearwhileclearingjammedmaterialorservicing

mayresultinseriouspersonalinjury.

6. Carry the pruning shear by the handle with the

blade stopped and taking care not to operate

the power switch.Propercarryingofthepruning

shearwilldecreasetheriskofinadvertentstarting

andresultantpersonalinjuryfromtheblades.

7. Check the hedges and bushes for foreign

objects, such as wire fences or hidden wiring

before operating the tool.

8. Hold the tool rmly when using the tool.

9. The tool is intended to be used by the operator

at ground level. Do not use the tool on ladders

or any other unstable support.

10 ENGLISH

Additional Safety Instructions

1. Use personal protective equipment. Always

wear eye protection.Protectiveequipmentsuch

asadustmask,non-skidsafetyshoes,hardhator

hearingprotectionusedforappropriateconditions

willreducepersonalinjuries.

2. This tool is for pruning branches.Donotuseit

foranyjobexceptthatforwhichitisintended.

3. Never allow children, persons with reduced

physical, sensory or mental capabilities or

lack of experience and knowledge or people

unfamiliar with these instructions to use the

tool. Local regulations may restrict the age of

the operator.

4. Children should be supervised to ensure that

they do not play with the appliance.

5. Never operate the tool while people, especially

children, or pets are nearby.

6. Do not overreach and keep balance at all

times.Alwaysbesureoffootingonslopesandto

walk,neverrun.

7. Do not touch moving hazardous parts before

the tool is disconnected from the mains and/or

the battery pack is removed from the tool.

8. Always wear substantial footwear and long

trousers while operating the tool.

9. Disconnect the supply and/or remove the

battery pack from the tool:

• wheneverthetoolisleftbytheuser,

• beforeclearingablockage,

• beforechecking,cleaningorworkingonthe

tool,

• afterstrikingaforeignobjecttoinspectthe

toolfordamage,

• ifthetoolstartstovibrateabnormally,for

immediately check.

10. Never operate the tool with defective guards

or shields, or without safety devices, or if the

cord is damaged or worn.

11. Avoid using the tool in bad weather conditions

especially when there is a risk of lightning.

12. Don’t use the tool or perform battery charging

operations in the rain.

13. Don’t leave the tool in rain or wet locations.

14. Be careful not to catch foreign matter between

the shear blades.Iftheshearbladesarejammed

withforeignmatter,immediatelyswitcho󰀨thetool

anddisconnectthebatteryfromthetool.Then

removetheforeignmatterfromtheshearblades.

15. Never hold the branch you are pruning with

your free hand.Keepyourfreehandawayfrom

thecuttingarea.Nevertouchtheshearblades,

theyareverysharpandyoumaycutyourself.

16. Don’t force the tool to make it cut. You could

slipandinjureyourselforcutsomethingelse

unintentionally.

17. Avoid cutting electrical wires that may be

hidden.

18. Always check the shear blades carefully

before operation.

19. Handle the shear blades with extreme care to

prevent cuts or injury from the shear blades.

20. Disconnect the battery from the tool after each

use and before attempting to perform inspec-

tion or maintenance.

21. When not in use, always keep the tool in its

holster.

Battery tool use and care

1. Avoid dangerous environment. Don't use the

tool in damp or wet locations or expose it to

rain. Water entering the tool will increase the

risk of electric shock.

2. Recharge only with the charger specied by

the manufacturer.Achargerthatissuitablefor

onetypeofbatterypackmaycreateariskofre

whenusedwithanotherbatterypack.

3. Use power tools only with specically desig-

nated battery packs.Useofanyotherbattery

packsmaycreateariskofinjuryandre.

4. When battery pack is not in use, keep it away

from other metal objects, like paper clips,

coins, keys, nails, screws or other small metal

objects, that can make a connection from one

terminal to another.Shortingthebatterytermi-

nalstogethermaycauseburnsorare.

5. Under abusive conditions, liquid may be

ejected from the battery; avoid contact. If con-

tact accidentally occurs, ush with water. If

liquid contacts eyes, additionally seek medical

help.Liquidejectedfromthebatterymaycause

irritationorburns.

6. Do not dispose of the battery(ies) in a re. The

cell may explode. Check with local codes for

possible special disposal instructions.

7. Do not open or mutilate the battery(ies).

Released electrolyte is corrosive and may

cause damage to the eyes or skin. It may be

toxic if swallowed.

8. Do not charge battery in rain, or in wet

locations.

Service

1. Have your power tool serviced by a qualied

repair person using only identical replacement

parts.Thiswillensurethatthesafetyofthepower

toolismaintained.

2. Follow instruction for lubricating and chang-

ing accessories.

3. Keep handles dry, clean and free from oil and

grease.

WARNING: DO NOT let comfort or familiarity

with product (gained from repeated use) replace

strict adherence to safety rules for the subject

product. MISUSE or failure to follow the safety

rules stated in this instruction manual may cause

serious personal injury.

SAVE THESE INSTRUCTIONS.

WARNING: DO NOT let comfort or familiarity

with product (gained from repeated use) replace

strict adherence to safety rules for the subject

product. MISUSE or failure to follow the safety

rules stated in this instruction manual may cause

serious personal injury.

Other manuals for UP100D

Table of contents

Languages:

Popular Power Tools manuals by other brands

AEG

AEG OMNI-JS Original instructions

SIP

SIP 01533 manual

Ribimex

Ribimex PRS499 quick start guide

3M Fiber Optic Connector Crimp Tool instructions

Ryobi

Ryobi P524 Operator's manual

ROJEK

ROJEK FSN 300A manual

Kemper

Kemper 1740PRO manual

WABCO

WABCO OptiTire installation manual

EINHELL

EINHELL TE-MS 18/210 Li Original operating instructions

Orgapack

Orgapack OR-T 85 Operating and safety instructions

TOUGHCUT

TOUGHCUT Diamond 400 instruction manual

Yaros

Yaros PB-3603 user manual

Fein

Fein BSS 2.0 E Repair instructions

Baileigh Industrial

Baileigh Industrial SS-2725 Operator's manual

Milwaukee

Milwaukee 2674-20 Operator's manual

Fein

Fein BLs 1.6 parts list

Princess

Princess Electric Multi Sharpener user manual

FOREDOM

FOREDOM K.1050 Operation & maintenance manual