MAIOR Levante User manual
Maior Levante
Instruction Manual
Rev 1.0 - 05/2019
Eurotecno srl
Via Proventa 120/1 - 48018 Faenza (RA) - Italy | Tel. +39 0546 646821 | info@maiormover.it
ADDRESS:
MAIOR - EUROTECNO SRL
ADDRESS:
Via Proventa, 120/1
48018 Faenza (RA) - Italy
Tel. +39 0546 646821
DOCUMENT TYPE:
Instruction Manual
PRODUCT:
Levante
YEAR OF CONSTRUCTION:
2019
CONFORMITY ':
Warnings
This manual contains the instructions needed to successfully perform the installation, the machine operation
and maintenance.
To safeguard the operator's safety and to avoid any possible damage to the equipment it is essential to have
taken knowledge of the entire manual before taking any action.
This manual is to be considered part of the machine and must therefore follow the machine's life cycle also
in the case of transfer of the same to another user.
This manual must be intact and readable in its entirety; each person authorized to use the equipment or
installation and/or maintenance must know the location and be able to consult it at any time.
Please refer to our latest version of the manual here:https://www.maiormover.it/area-riservata/
All machines are subjected to testing prior to shipment.
It is forbidden to make any kind of changes to the machine.
Any use of the machine different from what is expressly provided by this manual as potentially dangerous.
EUROTECNO SRL accepts no responsibility for the improper use of the machine.
Any damage to the machine or property derived from the infringement of the provisions contained herein or
direct or indirect tampering of any Maior component, will make the warranty invalid.
For each of all communication inherent to the machine, please always quote the serial number on the
nameplate on the machine (see Sec. 1.2)
IT
4
Summary
Warnings............................................................................................................................................................ 3
1. Product ....................................................................................................................................................... 5
1.1. Intended uses .................................................................................................................................... 5
1.2. package ............................................................................................................................................. 6
1.2.1. Package Contents ..................................................................................................................... 6
1.3. Machine description........................................................................................................................... 6
1.3.1. Components and knots.............................................................................................................. 6
1.3.2. Identification of the machine...................................................................................................... 7
1.3.3. Dimensions and technical data.................................................................................................. 8
1.3.4. Linak Actuator DL12XL.............................................................................................................. 9
1.3.5. motor lead.................................................................................................................................. 9
1.3.6. CDB6S unit................................................................................................................................ 9
1.3.7. Power cable compatible (EU version) ..................................................................................... 10
1.3.8. RFRL Receiver ........................................................................................................................ 10
2. Assembly instructions............................................................................................................................... 11
2.1. General safety instructions .............................................................................................................. 11
2.2. Installation........................................................................................................................................ 11
2.2.1. Instructions and tips for creating mobile.................................................................................. 11
2.2.2. installation Steps...................................................................................................................... 12
3. Operation, use, maintenance and disposal.............................................................................................. 15
3.1. Operating instructions...................................................................................................................... 15
3.2. commands ....................................................................................................................................... 15
3.3. Remote control optional................................................................................................................... 16
3.4. Procedure coupling between transmitter and receiver.................................................................... 16
3.5. Malfunction....................................................................................................................................... 17
3.6. Reset Procedure.............................................................................................................................. 17
3.6.1. Precautions.............................................................................................................................. 17
3.6.2. the column reset procedure (DL12XL) .................................................................................... 17
3.7. Maintenance .................................................................................................................................... 18
3.8. Demolition and disposal................................................................................................................... 18
4. Attached documentation........................................................................................................................... 19
4.1. EC Declaration of Conformity.......................................................................................................... 19
IT
5
1. Product
1.1. Intended uses
The equipment, called Maior Levante, is a lifting device for moving vertically a monitor or a television.
The purpose of the machine is to hide the TV, showing it only when desired.
The machine has to be installed within an article of furniture made specifically for the television that you are
going to mount. It is also envisaged that the environment in which it will be placed this mobile is not subject
to jolting movements or that may affect the cabinet and/or the machine installed in it.
The machine provides for the installation of a top closure panel that during use of the machine is moved
together with the television. This will allow to dispose, in completely closed machine, a continuous plane.
The machine can be controlled via a control panel, provided with the machine, or via its own home
automation system. It also provided an optional remote control.
IT
6
1.2. Package
The machine is attached to a pallet, packed in a wooden crate. The case is then further wrapped in a nylon
film.
The equipment must be transported using means having capacity suitable for the weight to be supported.
During transport the equipment must be protected with waterproof material to prevent seepage and water
deposits on electrical components.
1.2.1. Package Contents
Before installing the machine, check the contents of the crate.
The box contains:
- 1x machine
- 1x Drilling template
- 1x adjustable stand for top panel ⑤
- 2x decorative covers ⑧
- 2x Side cover ⑨
- 1x unit ⑫
- 1x Receiver ⑬
- Push-button 1x
- 1x Ethernet cable "linear" prepared for dry contacts and / or pushbutton (3 meters)
- 1x Instruction Manual and accompanying documents
If you verified the lack of any component, contact your dealer immediately.
1.3. Machine description
1.3.1. Components and knots
The following graphic identified the main groups and of the machine components.
Refer to it the bollinati numbers (eg. ③) present in the remainder of this manual.
Figure 1Components
IT
7
In line are some of the cables already in place, in order to cover the most common needs.
Coaxial cable 75 Ohm
Antenna
High Speed HDMI Cable
DVD, Blu-Ray, decoders
Cat.6 UTP Ethernet cable
Smart TV, data, home automation
for electric power cable of the television
The supply of cables may not correspond to that listed above in the case when ordering both a different
configuration was requested.
1.3.2. Identification of the machine
Each machine is accompanied by a label that uniquely identifies by serial number.
Figure 2: ID plate
The serial code is required for any communication relating to the machine.
The label is affixed to one of ⑧ ornamental wings, the side facing the back of the TV.
If it is necessary to consult, the wing can be removed from the machine by unscrewing the two screws that
fix it.
IT
8
1.3.3. Dimensions and technical data
Template
LEVANTE
dimensional data
Minimum height [mm]
842.5
Height [mm]
1901.5
Depth [mm]
185
maximum ascent speed [mm / s]
38
Vacuum Total weight [kg]
33
Electrical system
Power circuit [V]
220/110
Frequency [Hz]
50/60
flow
Maximum TV Capacity (including accessories) [kg]
30
Maximum TV Size
65 "900mm or until the short
side
Maximum covering panel capacity [Kg]
10
Figure 3: Dimensions
The adjustable support of the cover ⑤ panel allows an adjustment in the vertical direction,
independent of the column, 60mm
IT
9
1.3.4. Linak Actuator DL12XL
Features:
• Max. Thrust: 600 N
• Max. Speed: 38 mm / s
• Max bending moment: M max = 100 Nm dynamic
• Piezo ™: Anti-collision sensor
• PVC-Free ™
• Silent movement
use:
• Duty cycle: 5%
• Operating temperature: from + 10 ° to +40 ° C
• transport and storage temperature: -10 ° C to + 70 ° C
• approved system in accordance with EN 60335-1, UL 962 with CBD6S
Figure 4Column DL12XL
1.3.5. motor lead
Figure 5: Motor lead
The motor must be connected to the control unit via the supplied cable. The motor should not be connected
directly to the mains, it will invalidate the guarantee.
1.3.6. CDB6S unit
Features
• Power: 300W
• Power supply: 230V AC, 50Hz, or 120V AC, 60Hz
• Unit SMPS (Switch Mode Power Supply)
• Protection Electronic against overloads (EOP)
• Function soft start / stop
IT
10
• PVC-Free ™
• Power consumption in standby mode only 0.1W, ZERO ™ technology
use:
• Duty cycle: max. 10% ~ 6 minutes per hour or 2 minutes continuous use at full load
• CBD6S 300W is approved in accordance with standards EN 60335-1, EN 13849-1 and UL 962
Figure 6: Unit CDB6S
1.3.7. Power cable compatible (EU version)
Figure 7: Alimentation cable
1.3.8. RFRL Receiver
The RFR receiver operates radio frequency to 433 MHz.
It is connected to the control unit through a cable with a RJ45 connector.
The radio control operation is expected in a radius of about 6 meters from the receiver.
Environments in which there are other emitters of waves in radio-frequency, or in which the RF signal is
shielded could adversely affect the signal reception.
Table of contents
