MAIMAN ELECTRONICS SF6060 User manual
v1.0.1 ‒ 2020
SF6060
Laser diode driver
Datasheet &
User Manual
Before powering on your driver, read this manual thoroughly.
If you have any doubt or suggestion, please do not hesitate to contact us!
Maiman Electronics
web site: www.maimanelectronics.com
v1.0.1 ‒ 2020
v1.0.1:
Paragraph «Warranty», error-triggered fall-time values (Paragraph «Electrical characteristics»),
examples of digital commands, and correction in paragraphs «how to get started»and «Digital control
description (extended)» was added.
Maiman Electronics SF6060
2
Table of content
1. Features ............................................................................................................................................... 3
2. Applications.......................................................................................................................................... 3
3. Description........................................................................................................................................... 3
4. Package set .......................................................................................................................................... 3
5. Overall dimensions and weight ........................................................................................................... 3
6. Absolute maximum ratings.................................................................................................................. 3
7. Recommended operating conditions .................................................................................................. 4
8. Power supply requirements................................................................................................................. 4
9. Electrical characteristics ...................................................................................................................... 4
10. Typical Performance Characteristics ................................................................................................... 6
11. Functional schemes ............................................................................................................................. 8
12. Pin and terminal functions................................................................................................................... 9
13. Analogue control description ............................................................................................................ 11
14. How to get started ............................................................................................................................. 12
15. Cooling ............................................................................................................................................... 12
16. Internal protections ...........................................................................................................................12
17. Software.............................................................................................................................................12
18. Digital control description ................................................................................................................. 12
19. Digital control description (extended)............................................................................................... 17
20. Mechanical dimensions ..................................................................................................................... 20
21. Warranty ............................................................................................................................................20
Maiman Electronics SF6060
3
1. Features
Low current ripple
No need to adjust voltage
Soft-start
Adjustable overcurrent limit
Thermal warning and shutdown
Reverse current protection
Crowbar circuit protection
Universal controls
NTC thermistor input
Own software
2. Applications
Supplying laser diodes, bars and arrays
Supplying high power LED arrays
3. Description
The SF6060 is a non-isolated DC/DC SMPS
(POL) with constant current output. Driver
produces high stability and low ripple
current. Protection features include an over
current protection with adjustable limit, soft-
start, thermal warning and shutdown,
reverse current protection and crowbar
circuit protection. This means the SF6060 can
safely drive nonlinear and current quality
sensitive loads like laser diodes and LEDs.
The driver can be controlled by analogue
or digital signals.
SF6060 is available in thermal enhanced
quarter-brick package with aluminum base
plate to aid thermal dissipation. Driver can be
mounted on any thermal conductive surface
enough to dissipate driver losses.
4. Package set
Driver –1 pcs
50 cm ribbon cable with one 8-pin connector –1 pcs
50 cm ribbon cable with one 14-pin connector –1 pcs
Datasheet & User Manual –1 pcs
5. Overall dimensions and weight
The driver has overall dimensions of 57.9 x 36.8 x 21 mm and a weight of 60 g.
6. Absolute maximum ratings*
MIN
MAX
UNIT
Vin+ to Vin-
-0.3
60
V
Operating temperature
-40
50
°C
Analogue control pins to GND
-0.3
5.5
V
RS-232 RXD to GND
-25
25
V
RS-232 TXD to GND
-13.2
13.2
V
UART RXD to GND
-0.3
5.5
V
UART TXD to GND
-0.3
5.5
V
*Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device.
These are stress ratings only, which do not imply functional operation of the device at these or any other
conditions beyond those indicated under recommended operating conditions. Exposure to absolute-maximum-
rated conditions for extended periods may affect device reliability.
Maiman Electronics SF6060
4
7. Recommended operating conditions
MIN
MAX
UNIT
Input voltage (Vin)
12
55
V
Operating temperature
-10
40
°C
Analogue control pins to GND
0
5
V
RS-232 RXD to GND
-12
12
V
RS-232 TXD to GND
-12
12
V
UART RXD to GND
0
5
V
UART TXD to GND
0
5
V
8. Power supply requirements
The driver requires a DC power supply with line regulation ± 1%. The power supply must be able to
cover the driver output power and losses. The power supply voltage must be at least 27% higher than
the voltage drop of your laser diode. Recommended power supply: Mean well SE-1000-48.
ATTENTION! Do not use any relay between power supply and driver. When using a relay, voltage surges
may occur and driver may fail.
9. Electrical characteristics
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
UNIT
OUTPUT
Output voltage (Vout)
5
0.73*Vin
V
Output current (Iout)
0
15
A
Current ripple
15
25
mA
Pulse rate (F)
QCW-mode
0.1
100
Hz
Pulse duration
Set by RS-232 or UART
2
1/F - 2
5000
ms
Set by analogue pin
0.5
1/F
Rise time (Soft-start time)
Iout = 15A
60
75
100
us
Iout = 7.5A
60
75
100
us
Fall-time (Stop time)
20
60
70
us
Error-triggered fall-time (Stop time)
20
55
us
Output capacitance
13.2
uF
INPUT
Vin quiescent current
Vin = 48V, no AUX load
10
20
30
mA
Input capacitance
22
uF
CONTROLS
Enable pin low threshold
1
V
Enable pin high threshold
2.3
V
Interlock pin threshold
1
V
Interlock pin pull-up resistance
10
kΩ
Current set pin voltage vs. output
current
3
A/V
Current set step
Set by RS-232 or UART
0.01
A
Current set accuracy1
5A < Iout < 10A
+/- 5
%
10A < Iout < 15A
+/- 1
%
Current set calibration
- 5
+ 5
%
1
See more at regulation characteristic (Figure 3).
Maiman Electronics SF6060
5
AUX SUPPLY
+/- 15V accuracy
+/- 2
%
+/- 15V output current
20
30
mA
5V accuracy
+/- 1.5
%
5V output current
200
300
mA
INTERNAL MEASURMENTS
Internal measurements accuracy
+/-2
%
Current monitor pin voltage vs.
output current
3
A/V
Voltage monitor pin voltage vs.
output voltage
5
V/V
External sensor temperature
NTC 10k
-10
150
°C
POWER DISSIPATION
Driver losses
Vin = 55V, Iout = 15A
20
W
PROTECTIONS
Crowbar clamp resistance
7.4
9.4
mΩ
Crowbar clamp response time
100
200
ns
Over-temperature warning
threshold temp
60
°C
Over-temperature warning
hysteresis
2
°C
Over-temperature shut down
threshold temp
80
°C
Over-temperature shut down
hysteresis
22
°C
Maiman Electronics SF6060
6
10. Typical Performance Characteristics
Figure 1 –Power dissipation vs. output current at full load
Figure 2 –Efficiency vs. output current at full load
Figure 3 –Regulation characteristic: dotted –ideal, solid –real
Maiman Electronics SF6060
7
3A/div
50us/div
Figure 4 –Typical start up sequence
Figure 5 –Typical stop sequence
Maiman Electronics SF6060
8
11. Functional schemes
Analogue interface
Figure 6 –Analog interface functional scheme
Power unit
Figure 7 –Power unit functional scheme
Maiman Electronics SF6060
9
12. Pin and terminal functions
Please, note polarity!
Never ground any lead of the output,
this may cause permanent damage to the laser diode and the driver!
Never use any grounded probes (e.g. from the oscilloscope) at the output!
Control pins are not isolated!
Terminals
Please, pay attention to the markings!
Terminal
Description
Vin+
Connect to the positive terminal of
the power supply.
Please, note polarity!
Vin-
Connect to the negative terminal of
the power supply.
Please, note polarity!
LD+
Connect to the laser diode anode.
Please note polarity!
Grounding this terminal may cause
permanent damage to the driver.
LD-
Connect to the laser diode cathode.
Please note polarity!
Grounding this terminal may cause
permanent damage to the laser
diode.
Controls
№
Description
1
Analogue control connector
2
Current limit adjustment
potentiometer (adjustment from
zero to maximum occurs in 12 turns)
3
Digital control connector
Table of contents
Other MAIMAN ELECTRONICS DC Drive manuals
Popular DC Drive manuals by other brands
ABB
ABB RSYC-01 user manual
Rockwell Automation
Rockwell Automation PowerFlex 700S Programming manual
WEG
WEG DeviceNet CFW500 user manual
Siemens
Siemens SINAMICS G List manual
Siemens
Siemens SINAMICS SM150 6SL3815-7NP41-0AA1 Operating instructions & installation instructions
SOMFY
SOMFY JR RU 30 instructions