Magnetrol Eclipse 706GWR User manual

Eclipse®Model 706

PROFIBUS PA

Operating Manual

Software Version 1.x

High Performance, 4th Generation

Guided Wave Radar

Level Transmitter

Use in conjunction with

I&O manual BE 57-606

BE 57-658 Eclipse®Model 706 Guided Wave Radar Transmitter – PROFIBUS PA output

Table of Contents

1.0 PROFIBUS PA Overview

1.1 Description ...............................................................4

1.2 Benefits .....................................................................5

1.3 Device Configuration................................................5

1.3.1 PROFIBUS DD Revision Table......................6

1.4 Intrinsic Safety ..........................................................7

2.0 Function Blocks

2.1 Overview...................................................................7

2.1.1 Standard PROFIBUS Block Parameters ...........8

2.2 Physical Block ...........................................................8

2.3 Analog Input Block.................................................10

2.3.1 AI Block Parameters .....................................10

2.3.2 Local Display of

Analog Block Output Values ........................11

2.3.2.1 AI Out Display Screens .........................12

2.3.3 AI Block Configuration................................13

2.4 WR Transducer Block ..........................................14

3.0 Model 706 Transmitter Configuration

3.1 Configuration Information .....................................14

3.2 Menu Transversal and Data Entry...........................15

3.2.1 Navigating the Menu ...................................15

3.2.2 Data Selection ..............................................16

3.2.3 Entering Numeric Data Using Digit Entry ..16

3.2.4 Entering Numeric Data Using

Increment/Decrement ..................................17

3.2.5 Enter Character Data ...................................17

3.3 Password Protection ................................................18

3.4 Model 706 Menu: Step-By-Step Procedure .............19

3.5 Model 706 Configuration Menu: Device Setup ......21

4.0 Troubleshooting and Diagnostics

4.1 Diagnostic Parameters .............................................27

4.1.1 Diagnostics (Namur NE 107) ......................28

4.1.2 Diagnostic Indication Simulation.................29

4.1.3 Diagnostic Indicator Table ...........................29

4.1.4 Diagnostic Help ...........................................32

4.2 Diagnostic Parameters.............................................33

4.3 PROFIBUS PA Segment Checklist .........................36

Appendix A .........................................................................37

Eclipse®Model 706 GWR transmitter

with PROFIBUS PA Output

4BE 57-658 Eclipse®Model 706 Guided Wave Radar Transmitter – PROFIBUS PA output

1.0 PROFIBUS PA™Overview

1.1 Des ription

PROFIBUS PA™is a digital communications system that

serially interconnects devices in the field. A fieldbus system

is similar to a Distributed Control System (DCS) with two

exceptions:

• PROFIBUS PA™is a system that allows the user to

distribute control across a network. Fieldbus devices are

smart and actually maintain control over the system.

Unlike 4–20 mA analog installations in which the two wires

carry a single variable (the varying 4–20 mA current), a dig-

ital communications scheme such as PROFIBUS PA™con-

siders the two wires as a network. The network can carry

many process variables as well as other information. The

Model 706PA transmitter is a PROFIBUS PA™certified

device that communicates with the DPV1 protocol operat-

ing at 31.25 kbits/sec. The MBP physical layer is an

approved IEC 61158 standard.

An IEC61158 shielded twisted pair wire segment can be as

long as 6234 feet (1900 meters) without a repeater. Up to

4 repeaters per segment can be used to extend the distance.

The maximum number of devices allowed on a fieldbus seg-

ment is 32 although this depends on the current draw

of the devices on any given segment.

Details regarding cable specifications, grounding, termination,

and other network information can be found in IEC 61158

or the technical guideline “PROFIBUS PA™User and

Installation uideline” at www.profibus.com.

Control Room

Power Supply

Ter mi na to r

6234 feet (1900 meters) maximum

Ter mi na to r

Power

Conditioner

Typical PROFIBUS Installation

BE 57-658 Eclipse®Model 706 Guided Wave Radar Transmitter – PROFIBUS PA output

1.2 Benefits

The benefits of PROFIBUS PA™can be found throughout

all phases of an installation:

1. Design/Installation: Connecting multiple devices to a single

pair of wires means less wire and fewer I/O equipment.

Initial Engineering costs are also reduced because

PROFIBUS International requires interoperability, defined

as “the ability to operate multiple devices in the same system,

regardless of manufacturer, without a loss of functionality.”

All PROFIBUS PA™devices must be tested for

interoperability by a PI accredited, independent testing

agency. Magnetrol Model 706PA device certification infor-

mation can be found at www.profibus.com.

2. Operation: A PROFIBUS PA™system allows for multiple

variables to be brought back from each device to the control

room for additional trending and reporting.

3. Maintenance: The self-diagnostics residing in the smart

field devices minimizes the need to send maintenance

personnel to the field.

1.3 Devi e Configuration

The function of a PROFIBUS PA™device is determined by

the arrangement of a system of blocks. The types of blocks

used in a typical User Application are described as follows:

Physical Block describes the characteristics of the

PROFIBUS PA™device such as the device name,

manufacturer, and serial number.

Function Blocks are built into the PROFIBUS PA™devices

as needed to provide the desired control system behavior.

There can be numerous function blocks in a single User

Application.

Transducer Blocks contain information such as calibration

parameters and sensor type. They are used to connect the

sensor to the input function blocks.

An important requirement of fieldbus devices is the interop-

erability concept mentioned earlier. Device Description

(DD) technology can provide extended descriptions for

each object and provides pertinent information useful for a

host system.

DDs are similar to the drivers that your personal computer

(PC) uses to operate peripheral devices connected to it.

6BE 57-658 Eclipse®Model 706 Guided Wave Radar Transmitter – PROFIBUS PA output

General PROFIBUS Information:

• The Model 706 supports PA Profile Version 3.02

• The Ident Number issued by the PNO for Magnetrol

Model 706 is 0x101A. The Ident Number is included in

the name of the SD file.

• The eneral Station Description ( SD) file provides

information on the features and performance capabilities

of a PROFIBUS device to allow easy configuration of

PROFIBUS networks with devices from different manu-

facturers. The manufacturer-specific SD file for the

Model 706PA is MI01101A.gsd. Also, a bitmap file speci-

fied in the SD file provides a symbolic representation of

the device for network configuration tools.

• The Model 706PA can also use the profile-specific SD

file PA139707.gsd. If this general SD file is used, the

“Ident number Selector” parameter in the Physical Block

must be set to the profile-specific ident number. The

default selection of the “Ident Number Selector” parameter

is the manufacturer-specific ident number.

• A Device Description is available for configuring the

device using Simatic PDM.

• The range of device bus addresses is 0 to 126. 126 is the

default address and all units will ship with address 126

unless a non-default address assignment is requested by the

customer. The address can be changed via the fieldbus or

the local LCD interface.

Additional information can be found at www.profibus.com.

1.3.1 PROFIBUS DD Revision Table

Model 706PA

DD Version Release Date Compatible with Model 706PA

Firmware Software Revision

Dev V1 DD v1 March 2018 1.0 V 3.0.1

BE 57-658 Eclipse®Model 706 Guided Wave Radar Transmitter – PROFIBUS PA output

1.4 Intrinsi Safety

The IEC 61158 physical layer supports Intrinsic Safety (IS)

applications with bus-powered devices. To accomplish this,

an IS barrier or galvanic isolator is placed between the

power supply in the safe area and the device in the

hazardous area.

IEC 61158 also supports the Fieldbus Intrinsically Safe

Concept (FISCO) model which allows more field devices in

a network. The FISCO model considers the capacitance and

inductance of the wiring to be distributed along its entire

length. Therefore, the stored energy during a fault will be

less and more devices are permitted on a pair of wires.

Instead of the conservative entity model, which only allows

about 90 mA of current, the FISCO model allows a maxi-

mum of 110 mA for Class II C installations and 240 mA

for Class II B installations.

FISCO certifying agencies have limited the maximum

segment length to 1000 meters because the FISCO model

does not rely on standardized ignition curves.

The Model 706 PA is available with entity IS, FISCO IS,

FNICO non-incendive, or explosion proof approvals.

2.0 Fun tion Blo ks

2.1 Overview

The Eclipse Model 706 uided Wave Radar Level

Transmitter operates on the principle of Time Domain

Reflectometry (TDR).

The Eclipse Model 706PA is a uided Wave Radar ( WR)

level transmitter with twelve PROFIBUS PA™Blocks (one

Physical Block, three Transducer Blocks, and eight Analog

Input blocks). The idea of Function Blocks, which a user

can customize for a particular application, is a key concept

of fieldbus topology. Function Blocks consist of an algo-

rithm, inputs and outputs, and a user-defined name.

The TRANSDUCER block output is available to the

network through the ANALO INPUT blocks.

The ANALO INPUT blocks (AI) take the TRANSDUCER

block measured values and makes them available as an

analog value to the network. The AI blocks have scaling

conversion, filtering, and alarm functions.

8BE 57-658 Eclipse®Model 706 Guided Wave Radar Transmitter – PROFIBUS PA output

2.1.1 Standard PROFIBUS Block Parameters

The following are general descriptions of the parameters

common to all blocks. Additional information for a given

parameter is described later in that specific block section.

BLOCK_OBJECT: Contains the characteristics of the

block. This object applies to every block and is placed

before the first parameter.

ST_REV A read-only parameter to track changes of static

parameters in the associated block. ST_REV will be incre-

mented each time a static parameter is changed.

TAG_DESC (tag descriptor): A user-supplied description

of the block.

STRATEGY: A user-specified value that may be used in

configuration or diagnostics as a key in sorting block

information.

ALERT_KEY: A user-assigned value that may be used in

sorting alarms or events generated by a block.

TARGET_MODE: This attribute indicates what mode of

operation is desired for the block.

MODE_BLK: A structured parameter composed of the actual

mode, the normal and the permitted mode(s) of a block.

The actual mode is set by the block during its execution to

reflect the mode used during execution

The permitted mode shows which changes of the target

mode are valid for the specific block

ALARM_SUM: This parameter summarized the status of

up to 16 block alarms.

2.2 Physi al Blo k

The Physical Block contains data specific to the Model

706PA transmitter, along with some information about the

firmware.

NOTE: The Physical Block has no control function.

MODE_BLK: Actual mode must be in AUTO in order for

the AI Function blocks in the transmitter to operate.

NOTE: A Physical Block in “out of service” will stop all function block

execution in the transmitter.

SOFTWARE_REVISION: Revision number of the

software of the field device.

HARDWARE_REVISION: Revision number of the

hardware of the field device.

DEVICE_MAN_ID: Identification code of the

manufacturer of the field device.

BE 57-658 Eclipse®Model 706 Guided Wave Radar Transmitter – PROFIBUS PA output

DEVICE_ID: Manufacturer specific identification of the

device.

DEVICE_SER_NUM: Serial number of the device.

DIAGNOSIS: Detailed information about the device,

bitwise coded.

DIAGNOSIS_EXTENSION: Additional detailed

information about the device.

DIAGNOSIS_MASK: Definition of supported

DIA NOSIS information-bits.

0 = not supported

1 = supported

DIAGNOSIS_MASK_EXTENSION: Definition of sup-

ported DIA NOSIS_EXTENSION information-bits.

0 = not supported

1 = supported

DEVICE CERTIFICATION: Pertinent certifications of

the device.

WRITE_LOCKING: Software write-protection can be

enabled or disabled.

FACTORY_RESET: Command for resetting the device for

default values. The setting of the bus address in not affected.

• RESTART_WITH_DEFAULTS: As RESTART

DEFAULT will set all configuration parameters to their

default values. Devices need to be reconfigured follow-

ing activation of this function. The bus address is not

affected.

• WARM_START: No parameters changed

• RESET_ADDRESS_TO_DEFAULT: Other

parameters unchanged

DESCRIPTOR: User-definable text string to describe the

device within the application.

DEVICE_MESSAGE: User-definable message string used

to describe the device within the application of in the plant.

DEVICE_INSTAL_DATE: Installation date of the device.

IDENT_NUMBER_SELECTOR: Selects manufacturer-

specific Ident number issued by PNO or profile-specific

Ident number to determine features and behavior for

interacting with device.

HW_WRITE_PROTECTION: Indicates the position of a

write block mechanism (e.g., hardware jumper).

10 BE 57-658 Eclipse®Model 706 Guided Wave Radar Transmitter – PROFIBUS PA output

2.3 Analog Input Blo k

The ANALO INPUT (AI) block takes the Transducer

Block input data, selected by channel number, and makes it

available to other function blocks at its output:

2.3.1 AI Block Parameters

The first eight parameters in an AI block are the standard

block parameters discussed in section 2.1.1. Additional

analog input function block parameters are as follows:

BATCH: A parameter intended to be used in Batch applica-

tion in line with IEC 61512 Part 1.

OUT: Contains the current measurement value in the con-

figuration engineering unit.

PV_SCALE: High and low scale values used to convert

Process Variable Configured by channel into percent.

OUT_SCALE: The high and low scale values, the engineer-

ing code, and number of digits to the right of the decimal

point to be used in displaying the OUT parameters.

LIN_TYPE: Type of linearization. No linearization is sup-

ported in the AI function blocks.

CHANNEL: Selects the measurement value from an active

transducer block as the input to the function block.

PV_FTIME: Filter time of the Process Variable.

FSAFE_TYPE: Defines the reaction of a device, if a fault is

detected and the quality of the process variable input from

the transducer block is BAD.

0 = FSAFE_VALUE is used as OUT

1 = Use last stored valid OUT value

2 = OUT has incorrect calculated value; status

remains “bad”.

FSAFE_VALUE: Default value for the OUT parameter, if a

fault is detected, and FSAFE_TYPE is 0.

HI_LIM: Value of the upper limit of warnings.

LO_LIM: Value of the lower limit of warnings.

ALARM_HYS: Hysteresis to adjust sensitivity of alarm

triggering.

HI_HI_LIM: Value of the upper limit of alarms.

HI_LIM: Value of the upper limit of warnings.

Scaling

1. Level

2. Distance

3. Interface Level

4. Upper Thickness

5. Echo Strength

6. Ifc Echo Strength

7. Electronics Temperature

8. Probe Buildup

9. Volume

10. Flow

11. Head

12. NR Totalizer

13. R Totalizer

Other manuals for Eclipse 706GWR

Table of contents

Other Magnetrol Transmitter manuals

Magnetrol

Magnetrol Eclipse 706GWR User manual

Magnetrol

Magnetrol Kotron Sentinel II 804 Series User manual

Magnetrol

Magnetrol eclipse 705 User manual

Magnetrol

Magnetrol Orion Jupiter Enchanced 2 Series User manual

Magnetrol

Magnetrol Kotron 805 series User manual

Magnetrol

Magnetrol KOTRON SMART RF 805 User manual

Magnetrol

Magnetrol Eclipse 706 User manual

Magnetrol

Magnetrol 82 CE Series User manual

Magnetrol

Magnetrol Pulsar R96 User manual

Magnetrol

Magnetrol E3A Modulevel User manual

Magnetrol

Magnetrol STI Echotel 350 User manual

Magnetrol

Magnetrol Echotel 335 Assembly instructions

Magnetrol

Magnetrol Jupiter JM4 User manual

Magnetrol

Magnetrol Pulsar R86 User manual

Magnetrol

Magnetrol Jupiter JM4 User manual

Magnetrol

Magnetrol STI KOTRON 805 User manual

Magnetrol

Magnetrol Enhanced Model 705 User manual

Magnetrol

Magnetrol E3A Modulevel User manual

Magnetrol

Magnetrol Eclipse 706GWR User guide

Magnetrol

Magnetrol Eclipse 706-512 User manual

Magnetrol

Magnetrol Pulsar R86 User manual

Magnetrol

Magnetrol 2xx User manual

Magnetrol

Magnetrol PULSAR RADAR R86 Instructions for use

Magnetrol

Magnetrol ES Modulevel User manual

Popular Transmitter manuals by other brands

NIVELCO

NIVELCO EasyTREK SCA-300 Series Programming manual

Honeywell

Honeywell 5816WMBR installation instructions

Kamstrup

Kamstrup READy MTU Installation and operation guide

Omega

Omega ZW Series user guide

ABB

ABB Field 264H Instructions for installation

Alinco

Alinco DJ-V17T Service manual

Dejero

Dejero EnGo 3x manual

Rosemount

Rosemount 4600 Reference manual

Speaka Professional

Speaka Professional 2342740 operating instructions

trubomat

trubomat GAB 1000 instruction manual

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 instructions

Rondish

Rondish UT-11 quick start guide

MG 10JRE instruction manual

Burkert

Burkert 8177 operating instructions

Firetide

Firetide HotPort 3203 Hardware installation guide

Tele Radio

Tele Radio T9-02 User instructions

Rotronic

Rotronic HygroFlex HF3 Series user guide

Jamara

Jamara FCX6 Pro Tel Instruction