MadgeTech ThermoVault Max Specification sheet

ThermoVault Max

Extreme Temperature Thermal Barrier

PRODUCT

USER GUIDE

To view the full MadgeTech product line,

visit our website at madgetech.com.

Product User Guide | 2

ThermoVault Max

PRODUCT USER GUIDE

Product Overview

The ThermoVault Max is an extreme, high temperature

thermal barrier designed for use with the HiTemp140

series. This durable thermal barrier can withstand

temperatures up to +400 °C in dry heat applications and

+250 °C in wet applications when used with the TMAX Wet

Seal Kit (optional accessory).

Compatible Data Loggers

• HiTemp140-M12

• HiTemp140-FP

• HiTemp140-PT

Getting Started

Dry Applications

The HiTemp140-FP, HiTemp140-PT HiTemp140-M12 can

be used for dry applications up to +400 °C.

1. Unscrew the lid of the

thermal barrier.

3. If using the HiTemp140-M12

data logger, screw the

probe into the bottom end

of the barrier lid.

4. Slide the data logger and

lid back into the barrier

body and screw the lid

back on tightly.

2. Feed the probe of the data

logger through the bottom

end of the lid.

Product User Guide | 3

ThermoVault Max

PRODUCT USER GUIDE

Wet Applications

For use in wet applications, the TMAX Wet Seal Kit (sold separately, optional accessory) should be used with the

HiTemp140-FP, and HiTemp140-PT data logger. When used in wet applications the maximum operating environment

cannot exceed 250 °C (482 °F).

Installing the O-Ring: The O-Ring ensures a tight seal which prevents liquid from entering the inside of the barrier. O-Ring

maintenance is a key factor when properly caring for the ThermoVault Max. Please refer to the application note “O-Rings

101: Protecting Your Data Logger,” found on the MadgeTech website, for information on how to prevent O-Ring failure.

The TMAX Wet Seal Kit Includes:

• PTFE Thread Sealing Tape

• Fitting Body

• Dome Nut

• Compression Ferrules: PTFE (5), Stainless Steel (1)

• O-Ring

1. Unscrew the endcap of the

thermal barrier.

2. Stretch the O-Ring over the

endcap so it sits in the groove just

beneath the knurled shoulder.

Product User Guide | 4

ThermoVault Max

PRODUCT USER GUIDE

Securing the Compression Fitting: The compression fitting is used with the HiTemp140-FP and HiTemp140-PT data

loggers to ensure a water tight seal.

Compression Ferrule Note: The

stainless steel Ferrule provides the

most reliable seal, but becomes

permanent crimped onto the probe.

The PTFE Ferrule will become more

deformed with multiple uses and will

eventually require replacement. It’s

benefit is that it allows easy removal

and repositioning of the probe.

1. Wrap the provided PTFE thread

sealing tape around the Fitting

Body threads.

2. Screw the Fitting Body into the

end of the stopper assembly

(finger-tight).

3. Holding the smooth metal end of

the stopper, use a 7/16” wrench

or socket to tighten the body into

the stopper.

4. Insert the Compression Ferrule

into the Fitting Body and hold it in

place loosely with the Dome Nut.

5. Feed the data logger probe throw

the Compression Fitting until

the base of the probe is tightly

against the Dome Nut.

6. Tighten the Dome Nut to secure

the data logger in place (finger-

tight).

7. Insert the data logger and stopper

assembly back into the thermal

barrier and screw the endcap

of the thermal barrier until the

O-Ring is no longer visible.

ThermoVault Max

NEED HELP?

DOC-1322035-00 | REV 2 2020.04.28

6 Warner Road, Warner, NH 03278

(603) 456-2011

info@madgetech.com

madgetech.com

Product Support & Troubleshooting

• Visit our Resource Library online at madgetech.com/resources.

• Contact our friendly Customer Support Team at (603) 456-2011 or support@madgetech.com.

Table of contents

Other MadgeTech Data Logger manuals

MadgeTech

MadgeTech Pulse101A User manual

MadgeTech

MadgeTech MadgeNET RFTemp2000A Specification sheet

MadgeTech

MadgeTech RTDTempX Series Specification sheet

MadgeTech

MadgeTech TransiTemp-EC Specification sheet

MadgeTech

MadgeTech Volt101A User manual

MadgeTech

MadgeTech HiTemp140-M12 Specification sheet

MadgeTech

MadgeTech HiTemp140-PT Series Specification sheet

MadgeTech

MadgeTech TSR101-5 User manual

MadgeTech

MadgeTech HiTemp140 Series Specification sheet

MadgeTech

MadgeTech Therm-A-lert Specification sheet

MadgeTech

MadgeTech Bridge101A User manual

MadgeTech

MadgeTech Process101A User manual

MadgeTech

MadgeTech RFPulse2000A User manual

MadgeTech

MadgeTech X Series Specification sheet

MadgeTech

MadgeTech Volt101A-30V Specification sheet

MadgeTech

MadgeTech RHTemp101 User manual

MadgeTech

MadgeTech Shock101-EB Specification sheet

MadgeTech

MadgeTech QuadVolt User manual

MadgeTech

MadgeTech BRIDGE101A Specification sheet

MadgeTech

MadgeTech PR1000IS Series Specification sheet

MadgeTech

MadgeTech PRTemp140 Specification sheet

MadgeTech

MadgeTech Temp101A User manual

MadgeTech

MadgeTech CTL2000 User manual

MadgeTech

MadgeTech TEMP1000EX User manual

Popular Data Logger manuals by other brands

TESTO

TESTO 176 instruction manual

HT Italia

HT Italia XL421 user manual

HBM

HBM SOMAT XR CX22B-R operating manual

Agtrix

Agtrix 380i manual

Hobo

Hobo H8 Pro user manual

Beijing ART Tech

Beijing ART Tech PCI2320 user manual

Athena

Athena GET SL1 user manual

Motec Systems

Motec Systems C185 user manual

Beijing ART Tech

Beijing ART Tech USB2832 user manual

Rotronic

Rotronic HygroLog HL20 Short instruction manual

MRC

MRC DW-6092 Operation manual

Racelogic

Racelogic VBOX LapTimer quick start guide

Edu-Logger

Edu-Logger 900-240 Guide

Elma

Elma DT173 manual

Comet

Comet U0121M user guide

pico Technology

pico Technology PT-104 user guide

Soil Instruments

Soil Instruments GTecLink user manual

APLICOM

APLICOM A11 installation guide