Mad Catz REACTOR User manual

Wii Remote Manual

Page 1 of 10

Set Up of the Wii Remote

The remote uses two AA batteries. Use only high quality alkaline batteries for

the best game play experience and longevity of battery life. Please read the

following information carefully.

•Installing Batteries

•Synchronizing a Wii Remote With the Wii Console

•Turn the Rumble feature on or off

•Check battery levels

•Adjust volume of internal speaker

Installing the Batteries

Important Note: If you would like to use rechargeable batteries, the

only type of battery recommended are Nickel Metal Hydride batteries.

When it comes to using rechargeable batteries, you must follow

manufacturer guidelines for safety and proper usage. Failure to do so

could cause damage to the Wii Remote and void the warranty.

1. Remove the battery cover on the back of the Wii Remote and insert two

AA batteries, using the plus (+) and minus (-) guides in the Wii

Remote's battery compartment to insert the batteries in the proper

direction.

2. Be sure to insert the minus (-) end first when inserting new batteries,

and remove the plus (+) end first when replacing the batteries.

3. Replace the battery cover.

Wii Remote Manual

Page 2 of 10

Synchronizing the Wii Remote with the Wii Console

Synchronizing the Wii Remote to a Wii console allows the Wii Remote to

communicate with the console. The Wii Remote included with your system

should already be synchronized to your console. However, all additional Wii

Remotes you use with your system also need to be synced in order to function

properly..

There are two different modes of synchronizing (syncing):

•STANDARD MODE - The Standard Mode procedure is used when

adding additional Wii Remotes to your system or if you want to

re-synchronize your original Wii Remote. Once synchronized, the Wii

Remote will stay synced to the console unless you overwrite the

settings by syncing the remote to a different console. For instructions

on Standard Mode syncing, please click here.

•ONE TIME MODE - This mode allows you to temporarily use your

remote on a Wii console other than your own, or to use a friend's

remote on your console. It can also be used to change the order of the

Wii Remotes, without the need to turn off the Wii console. One Time

Mode does not delete the Standard Mode setting stored in the Wii

Remote. In this mode, the Wii Remote will only communicate with the

Wii console while the power is on. When the power is turned off, the Wii

Remote will lose its sync with the Wii Console. For instructions on One

Time Mode setup, please click here.

Note: Only a Wii Remote in Standard Mode can turn the Wii console power ON

or OFF.

Standard Mode Synchronization

Note: Make sure you have placed batteries in the Wii Remote (how to).

1. Press the Power button on the Wii console to turn it on.

2. Open the SD Card Slot cover on the front of the Wii console. Remove the

battery cover on the back of the Wii Remote you wish to sync up.

Wii Remote Manual

Page 3 of 10

3. Press and release the SYNC button on the inside of the SD Card

compartment on the console. Press and release the SYNC button just

below the batteries on the Wii Remote.

4. When the Player LED blinking stops, the syncing is complete. The LED

that is illuminated indicates the player number (1 through 4).

This procedure must be followed for each additional Wii

Remote added to your system.

One Time Mode Synchronization

Note: This mode temporarily removes Standard Mode synchronization

setup for all Wii Remotes until the power of the Wii console is turned off.

When the power is turned back on again, the Standard Mode settings

will return.

1. Press the HOME Button on a Wii Remote that is synchronized with the

Wii console.

Wii Remote Manual

Page 4 of 10

2. Select the Wii Remote Settings option from the Home Button menu.

3. Select the Reconnect Option.

4. Press the 1 and 2 Buttons at the same time on the Wii Remote that you

want to synchronize with the console. If you are syncing multiple Wii

Remotes, press the 1 and 2 Buttons on each Wii Remote

immediately (without a significant pause) in the order you want them

synced. The order in which you synchronize Wii Remotes determines

the player order (1 through 4) for multiplayer games. The Player LED

will blink during the syncing process. When the blinking stops, the

connection is complete.

Wii Remote Manual

Page 5 of 10

Turn the Rumble feature on or off

The Wii Remote has a built-in rumble device that will shake the Wii

Remote at certain points while using the Wii. The following information

describes how to turn this feature "on" or "off."

•Not all games use the Rumble feature.

•Turning the Rumble feature off can extend battery life of the Wii

Remote.

2. Press the HOME Button on a Wii Remote that is synchronized with the

Wii console.

3. Select the Wii Remote Settings option from the Home Button menu.

4. Select the Rumble "On" or "Off".

Wii Remote Manual

Page 6 of 10

Check battery levels

A fresh set of alkaline batteries should last, depending on amount and

type of use, up to 35 hours. This can vary greatly based on certain

factors, such as Wii Remote Speaker Volume, Rumble, battery quality

and age, and type of game being played.

Important Note: If you are using rechargeable batteries, the only

type of battery recommended are Nickel Metal Hydride batteries. When

it comes to using rechargeable batteries, you must follow manufacturer

guidelines for safety and proper usage. Failure to do so could cause

damage to the Wii Remote and void the warranty.

There are two ways to check the Wii Remote's battery levels:

•Remove the battery cover and press the Red "Sync" button. The number

of lights flashing indicates the Wii Remote's battery strength. Four

flashing lights indicates full strength, with one light flashing indicating

the lowest level.

•Use the HOME Menu to check battery level of each Wii Remote:

1. Press the HOME Button on a Wii Remote that is synchronized with

the Wii console.

Wii Remote Manual

Page 7 of 10

2. Select the Wii Remote Settings option from the Home Button

menu.

3. The battery level of all synced Wii Remotes is dispalayed along

the bottom. Four bars indicates a full charge, with one being the

lowest charge.

Adjust volume of internal speaker

The Wii Remote has a built-in speaker that is used at certain points

while using the Wii. The following information describes how to adjust

the volume of the Wii Remote's speaker.

•Not all games use the built-in speaker.

•Turning the speaker volume down can extend battery life of the

Wii Remote.

•This procedure must be performed on all Wii Remotes you wish to

adjust the volume of.

Wii Remote Manual

Page 8 of 10

1. Press the HOME Button on a Wii Remote that is synchronized with the

Wii console.

2. Select the Wii Remote Settings option from the Home Button menu.

3. Move the cursor over the "-" and "+" buttons to increase or decrease the

volume levels. You will hear a sound from the speaker each time you

adjust the setting. The sound approximates what the volume level

would be at that setting.

Wii Remote Manual

Page 9 of 10

Using the Wii Remote

This page details the common controller positions of the Wii Remote. If you

need assistance with setting up your Wii Remote (installing batteries, attaching

the wrist strap, or syncing to the console), click here.

Important Note: If you would like to use rechargeable batteries, the only

type of battery recommended are Nickel Metal Hydride batteries. When it

comes to using rechargeable batteries, you must follow manufacturer

guidelines for safety and proper usage. Failure to do so could cause damage to

the Wii Remote and void the warranty.

Wii Remote Configurations:

Depending on the game, the way you hold and operate the Wii Remote will

vary. You may need to hold the remote in either one or two hands. Read the

instruction booklet for the game you are playing for information about what

kind of game play control is required for that game.

The remote can be used by itself, or in different configurations when connected

up to other Wii accessories. These configurations can be used right or

left-handed.

Wii Remote Manual

Page 10 of 10

Basic Operations:

The Wii Remote redefines the controller with its motion-sensitive capabilities.

Below are some of the common motions Wii players can expect to perform

while enjoying their games.

Point: Point the Wii Remote

at a specific place on the TV

Screen

Waving: Wave the Wii

Remote back and forth from

side to side

Pushing or Pulling: Move the

Wii Remote forward and

backward.

Holding and Grabbing: Point the Wii Remote at a specific

place on the TV screen and move the Wii Remote while

holding down a button.

Twisting: Move the Wii

Remote in a twisting motion

by rotating your arm.

Table of contents

Other Mad Catz Video Game Controllers manuals

Mad Catz

Mad Catz MC2 User manual

Mad Catz

Mad Catz CUBICON User manual

Mad Catz

Mad Catz 900MHz DUAL FORCE 2 User manual

Mad Catz

Mad Catz L.Y.N.X. 3 User manual

Mad Catz

Mad Catz DUAL FORCE 2 User manual

Mad Catz

Mad Catz Z-CHUK BACK5716-MUG-R2 User manual

Mad Catz

Mad Catz Rock band 3 User manual

Mad Catz

Mad Catz Hand Held Racing Wheel User manual

Mad Catz

Mad Catz C.T.R.L. R User manual

Mad Catz

Mad Catz RB2 9766 MUG User manual

Mad Catz

Mad Catz MLG Pro Circuit User manual

Mad Catz

Mad Catz cybord F.L.Y. 9 User manual

Mad Catz

Mad Catz ADVANCED CONTROLLER User manual

Mad Catz

Mad Catz MC2 User manual

Mad Catz

Mad Catz 5873 User manual

Mad Catz

Mad Catz Cyborg V.3 Rumble User manual

Mad Catz

Mad Catz C.T.R.L. Smart Use and care manual

Mad Catz

Mad Catz Lynx User manual

Mad Catz

Mad Catz Lynx User manual

Mad Catz

Mad Catz ROCK BAND 3 MIDI PRO-ADAPTER 96071 User manual

Mad Catz

Mad Catz F.L.Y. 5 User manual

Mad Catz

Mad Catz street fighter V arcade fightstick tournament edition... User manual

Mad Catz

Mad Catz LYNX User manual

Mad Catz

Mad Catz EGO User manual

Mad Catz REACTOR User manual

Popular Video Game Controllers manuals by other brands