Mackworth SA160E User manual

SA160E User Manual Rev 3 - Aug 2016 Page

Unit 1, Tir Llwyd Industrial Estate, St Asaph Avenue, Kinmel Bay, Rhyl, Conwy, LL18 5JA

Tel +44 (0)1924 840100 www.prismmedical.co.uk info@prismmedical.co.uk

User Manual

Mackworth

Stand Aid

SA160E

SA160E User Manual Rev 3 - Aug 2016 Page 2

1.0 Assembly instructions Page

1.1 Initial Assembly 3

2.0 Stand Aid Features

2.1 Emergency Stop Button 6

2.2 Emergency Lowering 7

2.3 Control Box 8

2.4 Handset 8

3.0 Operating instructions

3.1 To Alter the Leg Width 9

3.2 Positioning 9

3.3 Knee block adjustments 10

3.4 Raising & Lowering 10

3.5 Batteries—recharging 11

4.0 Safety precautions

4.1 Safety precautions 12 & 13

5.0 Safety Checks

5.1 Daily Check List 14

5.2 Warning Notes 14

6.0 Technical Specification

6.1 Dimensions & Weights 15

6.2 Sound levels 15

6.3 Maximum lifting Height & leg width 16

6.4 Electrical detail 16

6.5 SA160 Main Assembly Components 17

7.0 Fault Finding / Maintenance

7.1 Fault Finding 18

7.2 Service / Maintenance 18

7.3 Cleaning & Sterilisation 18

Declaration of Conformity 19

8.0 Test Certificate & Guarantee 20

9.0 Testing and service record

10.1 Initial Information 21

10.2 Service record History 22

10.0 Standing support and Posterior sling 25

Table of Contents

Mackworth SA160E - Stand Aid

SA160E User Manual Rev 3 - Aug 2016 Page 3

1.0 ASSEMBLY INSTRUCTIONS

Mackworth SA160E Stand Aid

1.1 Initial Assembly

1. Remove carefully from the box:

Boom / Mast assembly

Base unit with legs attached (Base Unit)

Battery pack / charging lead

Hand set control

Foot Plate

Document wallet

SAFETY NOTE: Some of the parts are heavy and will need to be lifted with

care. Heavier items may need two people to lift. ( Please refer to technical

details on page 15

2. Place base unit on level floor surface and lock rear castors.

3. Remove boom/mast assembly from packaging.

Boom / Mast

Assembly

Base Unit with

Legs attached

Foot Plate

Hand set

Battery Pack

SA160E User Manual Rev 3 - Aug 2016 Page 4

1.0 ASSEMBLY INSTRUCTIONS

Mackworth SA160E Stand Aid

5 The control unit is already fitted to the

mast, so assembly is not required.

Check the emergency stop button (red

button) located on the control box is in

the out position (i.e. out )

6 Fit the battery pack to the control box

making sure it clicks into position in the

top of the bracket, as shown.

Emergency stop button

Mast locking knobs

SAFETY NOTE: Possible finger trap. Keep fingers away from

end of mast when fitting to base unit.

4. Carefully take the boom/mast

assembly and slide bottom of the mast

into the base socket. When the mast is

fully engaged into the base, fit both of

the 2 mast locking knobs and tighten by

hand firmly

SA160E User Manual Rev 3 - Aug 2016 Page 5

8 Fit the lifting actuator into the socket

located on the base of the control unit.

7 Fit the hand control unit to the

hand control socket located on the

base of the control unit.

NOTE: The hand control lead can

only be fitted in one orientation

into its socket. Do not use force to

insert the hand control into its

socket. The plug when correctly

inserted should be pushed firmly

home.

9. Fit the mains cable I into the socket

on the underneath of the control unit.

You have a choice where the mains

cable can be stored, either away from

the hoist or it can be stored at the side

of the battery pack / control unit.

See page 11.

SA160E User Manual Rev 3 - Aug 2016 Page 6

Emergency Stop Button

11. The foot plate is fitted onto the

base by locating it onto the 2 location

pegs either side of the mast, as shown.

2.0 STAND AID FEATURES

2.1 Emergency Stop Button

During all operations and at all times,

the stop button should be in the out

position. In the unlikely event of a

failure of the handset control, it is

possible that the electric ram either

continues to lift or continues to lower.

This may be overridden by pressing the

Emergency stop button to stop the ram.

To re-set the button after it has been

pressed, simply twist it slightly

clockwise and the button will spring

outwards.

NOTE: THE STAND AID WILL NOT OPERATE WITH THE STOP BUTTON

PUSHED IN

SA160E User Manual Rev 3 - Aug 2016 Page 7

Twist Clockwise to Lower

2.2 Emergency Lowering / raising

Manual emergency lowering is facilitated by turning the emergency lowering ring

clockwise. The ring is situated at the top of the actuator where the actuator connects

to the mast.

Electrical emergency lowering: is facilitated by pressing the button on the control

box.

Electrical Emergency

Lowering Button

SA160E User Manual Rev 3 - Aug 2016 Page 8

2.3 Control Box

The control box has been developed for patient lifting devices and the features that

meet the patients needs for a safe and comfortable transfer.

The actuator for the raising / lowering is connected into the bottom of the

control box.

To recharge the batteries the hoist is connected to the mains via a mains lead.

See page 11 regarding ‘Re-charging the batteries’

Handset

Connection

Actuator Connection

Battery Charge

Level Indicator

Raising

Lowering

2.4 Handset

The Stand Aid handset operates 2 functions on the

Stand Aid. They are:-

1. Raises the Boom

2. Lowers the Boom

The handset is attached to the control box via a

flexible cable that is secured in place with a

bayonet type fitting.

The back of the handset has a hook that enables

the user to position the handset anywhere on the

boom whilst attending to the patient.

Clear and easy to understand button diagrams

enable ease of use for the caregiver.

SA160E User Manual Rev 3 - Aug 2016 Page 9

3.0 OPERATING INSTRUCTIONS

Mackworth SA160E Stand Aid

Before use, you should familiarise yourself with use of the Stand Aid the procedure

for opening / closing the leg sections and raising and lowering the Stand Aid,

including emergency stop/lower and raise functions. Appropriate training in lifting

and handling procedures should be undergone by any person operating a Stand Aid

or sling, for their own and the clients safety and comfort. These instructions are

designed to cover the method of using of the Mackworth Stand Aid .

3.1 To Alter the Leg Width

The legs on the base unit of the Stand Aid are operated by adjusting the leg lever

pedal, as shown in the photo below. To open the legs, press on “open” to close the

legs, press on “close”. Stand Aid manoeuvres can be completed with the legs in

any position.

3.2 Positioning

1. Fit the person to be lifted with a suitable sling. Instruction should be taken in the

fitting of slings to ensure maximum safety and comfort. A full assessment

should be carried out by a qualified person and carers should be trained

in the correct use. (See sling safety)

2. Select the leg position required. Position the Stand Aid near to person to be

lifted. Assuming you are lifting on a level surface do not use the brakes on the

Stand Aid (A documented risk assessment may advise to use the brakes). This

allows the Stand Aid to align its self before lifting. Ensure ALL sling loops are

attached over the safety hooks.

NOTE: It is recommended to only use the brakes when carrying out lifts on / off the

floor, following a risk assessment or when the Stand Aid is not in use & on

charge.

*PLEASE READ THE OPERATING INSTRUCTIONS CAREFULLY*

SA160E User Manual Rev 3 - Aug 2016 Page 10

3.4 Raising & Lowering

1. To raise a person press handset button marked with upward facing arrow.

When the sling straps become taut before the lift is commenced, check the

straps are secure in position over the hooks on the boom before continuing the

lift. When the desired height has been reached, release button and the Stand

Aid will stop.

2. When moving a person use the mast push handle and walk with the Stand Aid

NEVER pull or twist at arms length, this can cause injury to the carer.

3. To a lower person, press and hold handset button marked with downward

facing arrow and Stand Aid will descend. When you have reached desired

level, simply release button and Stand Aid will stop in that position.

3.3 Knee Pad Adjustment

The knee pad can be adjusted either inwards / outwards or raising / lowering the

height.

Moving the Knee pad can be achieved by altering the position of the brackets which

hold the knee pad in place.

To move the knee pad in / out, pull out and twist the location pin by the knee pad,

then move the knee pad to the required position.

To alter the height of the knee pad, pull out and twist the location pin, then move the

knee pad to the required position .

Pull out and twist knob to

change height of knee pad

Pull out and twist knob to

move knee pad in or out

Table of contents

Other Mackworth Wheelchair manuals

Mackworth

Mackworth M60 User manual

Popular Wheelchair manuals by other brands

Otto Bock

Otto Bock Skippi plus Service manual

Invacare

Invacare Action 4NG series user manual

SORG

SORG LoopSORG 802 Instructions for use

Designability

Designability WizzyBug User instruction

Vermeiren

Vermeiren RAPIDO instruction manual

Excel

Excel G5 KIDS 0285 user manual

M. Bartels

M. Bartels SA-3 Operation manual

nino robotics

nino robotics NIno user manual

Vermeiren

Vermeiren Turios installation manual

Invacare

Invacare MK5 EX Service manual

Invacare

Invacare Solara Spree GT Owner's operator and maintenance manual

Nova

Nova TKW-12 user guide

BCW

BCW Advantage manual

You-Q

You-Q Luca Service manual

interco

interco Ortolight Standard Operating guidelines

Nova

Nova 7190L owner's manual

Vermeiren

Vermeiren EZ1 instruction manual

PaceSaver

PaceSaver Scout M-300 owner's manual