LuxCam Connect User manual
LUXCAM 4G Multifunction Wireless Router
User Manual
◎Overview
Thank you for choosing the 4G multifunction wireless router !
Supported functions and actual appearance depend on the specific models
you purchased.The illustrations are provided for your reference only.For
details about the model you selected,consult your service provider.This
guide briefly describes the functions of the 4G router.For more details,see
“HELP” on the web management page.
◎Appearance
Appearance
USB Port only sup Introduction of MIFi
1. WiFi Indicator Light
2. Micro SD Card
3. Signal Strength Indicator
4. Battery Level Indicator
5. LOGO
6. Power Button/ Breathing Indicator
7. RESET
8. ply power for other device
9. Micro-USB Charging Port
10. Charge Indicator Light
11. Micro-SD Card Slot
12. Sim Card Slot
13. LAN/WAN Port
◎LED Display
NO.
Display Icon
Description
*
NO Icon
Power off or not receiving power.
1
WLAN indicator
No icon:WLAN can not be used.
Blue:WLAN is ready.
Blue Flashing:device sleep mode
2
Data indicator
No icon:Data are not ready.
Blue:Data are ready.
3
Signal level indicator
Blue:Signal strength is very good.
Purple:Signal strength is good.
Red:SIM not insert or Signal strength
is generally.
4
Battery level indicator
Blue:Battery capacity ≥80%.
Purple:Battery capacity 40~80%.
Red:Battery capacity 10~40%.
Red Flashing:Battery capacity <10%，
please charge immediately.
5
Charging Indicator
Blue:Device is charging.
No icon: charging end.
◎Installing the SIM Card
Caution : Do not use any SIM card that is not standard or is incompatible
with the router .Otherwise,the router will be damaged.
Insert the SIM card in the card slot.Be sure that the SIM card is facing in
the right direction as shown in the following figure,and then slide the
SIM card into the slot.
◎Installing the TF(Micro SD) Card
Insert the TF card in the card slot.Be sure that the TF card is facing in the
right direction as shown in the following figure,and then slide the TF card
into the slot.
Note: Micro SD card support up to 32GB, USB or WEB access .
◎Charging the Battery
※Using the charger
Caution :Only use chargers compatible with the router, use of an
incompatible charger or one from an unknown manufacturer may cause
the router to malfunction,fail,or could even cause a fire. Such use voids
all warranties,whether expressed or implied on the product.The charger is
an optional accessory.IF the charger is not provided in the
package,contact your local dealer to buy one.
※Connecting to a PC for charging
Connect the router to a PC using a compatible data cable.
Note: Input range +5±0.25V,1A
◎Discharging (Router works as a power bank)
Router must powered on,connect a standard USB dis-charger to Output
port.
Note: Output range +5V,1A
◎Device POWER ON/OFF
※POWER ON：
Press the POWER button and hold until the LED all light
up. The device enter working state.
※POWER OFF：Press the POWER button and hold until LED all light
up one second then light off,router is power down.
◎Restart router
Mark sure router power on，
short press
（≤2S）RESET button,restart your
router will not change any current parameters.
◎Restoring Factory Defaults
If you forget the changes you have made to some parameters,you may
restore factory defaults and reconfigure the router. To restore the factory
defaults,press and hold the RESET button until the LED turn off and then
turn on again. All factory default setting are successfully restored.
Note :Restoring factory defaults deletes all personal configuration
settings and restore all web_based management settings and parameters
to the default values.
◎Connection Scenario
Scenario 1: Connect to Internet via USB（Router works as USB modem）
Step 1:Install SIM card and power on,connect router with computer via
USB connector.
Step 2:Install application driver and network adapter step by step
according to tip.
Step3:Surfing internet after the network adapter installation done.
Scenario 2: Connect to Internet via WLAN
Step1:Install SIM card and power on.
Step2:Establish a WLAN connection.
Other manuals for Connect
1
Table of contents
Other LuxCam Network Router manuals
