Lupo SCENE SETTER 48 User manual
SCENE SETTER 48
User Manual
SC - 2448 48CH
Dimmer Console
SCENE SETTER / DC-1224 24 CH Dimmer Console.
Improvement and changes to specications, design and this manual, may be made at any time without prior notice.
All Rights Reserved
Contents
Features
General Instructions
1. Overview
1.1 Front View
1.2 Rear View
2. Operation Guide
2.1 Begin Programming
2.1.1 Record Enable
2.1.2 Security for Your Programs
2.1.3 Program Scenes
2.2 Editing
2.2.1 Edit Enable
2.2.2 Erase a Program
2.2.3 Erase all Programs
2.2.4 Clear a Scene or Scenes
2.2.5 Delete a Step or Steps
2.2.6 Insert a Step or Steps
2.2.7 Modify a Step or Steps
2.3 Running 18
2.3.1 Running Chase Programs
2.3.2 Running a Program To Audio
2.3.3 Running a Program With the Speed Slider
2.3.4 Running a Program With the Standard Beat
2.4 Change the Speed Mode between 5 Minutes and 10 Minutes
3. MIDI Operation & DMX Channel Setup
3.1 Setting MIDI IN
3.2 Setting MIDI OUT
3.3 Exit MIDI Setting 24
3.4 Receiving MIDI File Dump
3.5 Sending MIDI File Dump
3.6 Implementation
3.7 DMX Channel Setup
3.8 Clear of DMX Channel Setup
3.9 Call 12 Preset Programs
Technical Specications
Brief of Main Functions
1
2
3
3
6
7
7
7
7
8
11
11
12
13
13
14
15
17
18
18
19
20
21
22
23
23
23
24
24
25
25
27
28
28
32
29
Features
Thank you for your purchase.
This product features include:
Digital Technology Adopted.
As a stage light controller, the unit can control intelligent unit and ordinary
light.
Power Failure Memory.
Automatically recover to the last condition when you turn on the machine.
Standard MIDI and DMX ports.
Conveniently connect with other units and machines.
Powerful Program Edit.
You could edit different program according to your needs. The program
could contain 4600 steps utmost and 48 programs could be stored.
Various Running Type.
You can run the SCENE with Audio, Speed Slider, Standard beat etc.
More programs can run synchronously.
You can run more programs in Single Mode or Mix Mode simultaneously.
1
General Instructions
2
Read the instruction in this manual carefully and thoroughly, as they give important
information regarding safety during use and maintenance. Keep this manual with
the unit, in order to consult it in the future. If the unit is sold or given to another
operator, make certain that it always has its manual, to enable the new owner to
read about its operation and re lative instructions.
• DO NOT make any inammable liquids, water or metal objects enter the unit.
• Should any liquid be spilled on the unit, DISCONNECT the power supply to the
unit immediately.
• STOP using the unit immediately in the event of serious operation problems
and either contact your local dealer for a check or contact us directly.
• DO NOT open the unit – there are no user serviceable parts inside –.
• NEVER try to repair the unit yourself. Repairs by unqualied people could
cause damage or faulty operation. Contact your nearest dealer.
• This unit is NOT intended for home use.
• After having removed the packaging check that the unit is NOT damaged in
any way. If in doubt, DON’T use it and contact an authorized dealer.
• Packaging material (plastic bags, polystyrene foam, nails, etc.) MUST NOT be
left within children’s reach, as it can be dangerous.
• This unit must only be operated by adults. DO NOT allow children to tamper or
play with it.
• NEVER use the unit under the following conditions:
– In places subject to excessive humidity.
– In places subject to vibrations or bumps.
– In places with a temperature of over 45 °C/113 °F or less than 2 °C/35,6 °F.
• Protect the unit from excessive dryness or humidity (ideal conditions are
between 35% and 80%).
• DO NOT dismantle or modify the unit.
WARNINGS
CAUTIONS
1. Overview
1.1 Front View
3
1. Overview
1.1 Front View
1Preset A LEDs Show the current intensity of the relevant channel
numbered from 1 to 24.
2Channel Sliders 1-24
3Flash Buttons 1-24
4Preset B LEDs
5SCENE LEDs
6Channel Sliders 25-48
7Flash Buttons 25-48
8Dark Button
9Down/Beat Rev
10 Mode Select/Rec Speed
11 Up/Chase Rev
12 Page Button
13 Delete/Rev One
14 Segment Display
15 Insert / % or 0-255
These 24 sliders are used to control and /or program
intensities of channels 1-24.
These 24 buttons are used to bring an individual
channel, to full intensity.
Show the current intensity of the relevant channel
numbered from 25-48.
Light when relevant scenes are active.
These 24 sliders are used to control and /or program
the intensities of channels 25-48.
These 24 buttons are used to bring an individual
channel, to full intensity. They also are used for
programming.
This button is used to momentarily black out overall
output.
DOWN functions to modify a scene in Edit mode;
BEAT REV is used to reverse the chasing direction of
a program with regular beat.
Each tap will activate the operating mode in the
order: CHNS /SCENES, Double Preset and Single
Preset. Rec Speed: Set the speed of any of the
programs chasing in Mix mode.
Up is used to modify a scene in Edit mode.
Chase Rev is to reverse the chasing direction of a
scene under Speed Slider control.
Tap to select pages of scenes from Page 1-4.
Shows the current activity or programming state.
Insert is to add one step or steps into a scene.
% or 0-255 is used to change display value cycle
between % and 0-255.
Delete any step of a scene or reverse the chasing
direction of any program.
4
1. Overview
1.1 Front View
16 Edit / All Rev Edit is used to activate Edit mode.
All Rev is to reverse the chasing direction of all
programs.
17 Add or Kill/ Rec Exit
18 Record/ Shift
19 Master A Button
20 Park Button
21 Hold Button
22 Step Button
23 Audio Button
24 Master Slider A
25 Master Slider B
26 Blind Button
27 Home Button
28 Tap Sync Button
29 Full On Button
30 Black Out Button
In Add mode, multiple scenes or Flash buttons will
be on at a time.
In Kill mode, pressing any Flash button will kill any
other scenes or programs.
Rec Exit is used to exit from Program or Edit mode.
Record is used to activate Record mode or program
a step.
Shift functions only used with other buttons.
Brings channel 1-24 to full of current setting.
Used to select Single/Mix Chase, bring Channel
25-48 to full of current setting, or momentarily
program a scene into Master B slider, depending on
the current mode.
This button is used to maintain current scene.
This button is used to go to next step when the
Speed Slider is pushed to the bottom or in Edit mode.
Activates audio sync of chase and audio intensity
effects.
This slider controls overall output of all channels.
This slider controls the chase of all programs.
This function takes the channel out of the chase of a
program in CHNS /SCENE mode.
This button is used to deactivate the Blind.
This function bring overall output to full intensity.
This button is used to kill all output with exception
for that resulting from Flash and Full On.
Repeatedly tapping this button establish the chase
speed.
31 Fade Time Slider
32 Speed Slider
33 Audio Level Slider
34 Fog Machine button
Used to adjust the Fade Time.
Used to adjust the chase speed.
This slider controls the sensitivity of the Audio input.
5
1. Overview
1.2 Rear view
35 Power Switch This switch controls turning on or off of the power.
36 DC Input
37 MIDI Thru/Out/In
38 DMX Out
39 Audio Input
40 Remote Input
41 Fog Machine Connector
DC 12-20V, 500 mA Min.
MIDI ports for connection to a sequencer or MIDI
device.
This connector sends your DMX value to the DMX
xture or DMX pack.
This jack accepts a line level audio input signal
ranged from 100mV to 1Vpp.
Black Out and Full On may be controlled by a remote
control using a standard 1/4”stereo jack.
For connection to an outside fog machine.
6
2. Operation Guide
2.1 Begin Programming
2.1.1 Record Enable
2.1.2 Security for Your Programs
1. Press and hold down the Record button.
2. While holding down the Record button, tap the Flash buttons 1, 6, 6 and 8
sequence.
3. Release the Record button, the Record LED lights up, now you can begin
programming your chase patterns.
NOTE:
The rst time you turn on your unit, the default setting of the Record Code is
Flash buttons 1, 6, 6 and 8.
You may change the Record Code to protect your programs.
To protect your programs from any editing by others, you may change the Record
Code.
1. Enter current Record Code(Flash buttons 1, 6, 6 and 8).
2. Press and hold down the Record and Edit buttons at a time.
7
This manual suits for next models
1
Table of contents
Other Lupo Dj Equipment manuals
