Lumo LU002RDSP-AL01 User manual
LU002RDSP-AL01, LU002RDSP-BR01 2W
www.lumo.ae
12V AC/DC or 24V DC
INPUT VOLTAGE
IP67
LED PENNISETUM LIGHT - WITH SPIKE
Switch off the main power before doing any installation or
maintenance process. Insert the coupler in to the PVC spike.
1
Optional height extending rod can be attached to the light.
Put the PVC spike to the place that you like to have the light
almost 40cm away from the object or tree.
3
2
Install the light in the PVC spike.
4
PART NO. POWER
OFF
1x
5
Note : This product is out of warranty if :
1-The installation method is not followed as per instruction-sheet
2-Installation material is not used properly
3-Waterproofing is not done as per instruction method
4-Waterproofing connectors are not used
5-The correct voltage is not used
6- If the light is permanently submerged in water
7- If drainage is not provided to drain the rain water
Note : To prevent any risk while doing installation of this product an electrical engineer need to install / supervise installation team.
www.lumo.ae
Connect the light to the main cable which comes from 12V transformer or 24V LED driver. Using
waterproof connectors. (To make a group of lights T-connectors and for single connection I-connector.).
Turn On the power after installation.
LED PENNISETUM LIGHT - WITH SPIKE
ON
T-connector
I-connector
24V LED Driver
Junction Box
LED Driver
12V Transformer
LED
Transformer
LU002RDSP-AL01, LU002RDSP-BR01 2W
www.lumo.ae
12V AC/DC or 24V DC
INPUT VOLTAGE
IP67
LED PENNISETUM LIGHT - WITH BRACKET
Switch off the main power before doing any installation or
maintenance process.
1
Optional height extending rod can be attached to the light.
Insert the coupler in to the Bracket.
3
2
Install the light in the Bracket.
4
PART NO. POWER
OFF
1x
5
Note : This product is out of warranty if :
1-The installation method is not followed as per instruction-sheet
2-Installation material is not used properly
3-Waterproofing is not done as per instruction method
4-Waterproofing connectors are not used
5-The correct voltage is not used
6- If the light is permanently submerged in water
7- If drainage is not provided to drain the rain water
Note : To prevent any risk while doing installation of this product an electrical engineer need to install / supervise installation team.
www.lumo.ae
LED PENNISETUM LIGHT - WITH BRACKET
Connect the light to the main cable which comes from 12V transformer or 24V LED driver. Using
waterproof connectors. (To make a group of lights T-connectors and for single connection I-connector.).
Turn On the power after installation.
ON
T-connector
I-connector
24V LED Driver
Junction Box
LED Driver
12V Transformer
LED
Transformer
This manual suits for next models
1
Table of contents
Other Lumo Landscape Lighting manuals
Popular Landscape Lighting manuals by other brands
Cooper Lighting
Cooper Lighting MCGRAW-EDISON WBG Specification sheet
Cooper Lighting
Cooper Lighting Invue 42 - 175W Specification sheet
Saxby Lighting
Saxby Lighting Islay 68784 Instruction leaflet
LIGMAN
LIGMAN EU-10016-3 installation manual
Cooper Lighting
Cooper Lighting McGraw-Edison ZD Credenza specification
LIGMAN
LIGMAN KI-60475 installation manual
Cooper Lighting
Cooper Lighting Generation CLB25MWW5C373 Specification sheet
Malibu Boats
Malibu Boats CL905K instructions
LIGMAN
LIGMAN NYB-30161 installation manual
LIGMAN
LIGMAN SI-80021 installation manual
Volt
Volt 2-in-1 Tiki-Brass Torch Light installation instructions
Malibu Boats
Malibu Boats CM110P instructions