Luminar Outdoor 56423 Assembly instructions

Visit our website at: http://www.harborfreight.com

Email our technical support at: [email protected]

Owner’s Manual & Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions, assembly,

operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the

back of the manual near the assembly diagram (or month and year of purchase if product has no number).

Keep this manual and the receipt in a safe and dry place for future reference. 19e

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly an d se rv ic e may n ot b e in cl uded.

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

Page 2 For technical questions, please call 1-888-866-5797. Item 56423

Specifications

Electrical Rating 120VAC / 60Hz / Max 1.92A

Fuse Rating 125V 5A

Length (one Rope Light) 18 ft

Max Length 16 Segments (288 ft)

IMPORTANT SAFETY INFORMATION

READ AND FOLLOW ALL SAFETY INSTRUCTIONS.

1. Do not cover this product as the covering may cause

the flexible light to overheat and melt or ignite.

2. Do not operate with the flexible light tightly coiled.

3. Do not puncture, cut, shorten, or

splice the flexible lighting.

4. Do not route the cord or flexible lighting

through walls, doors, windows or any

like part of the building structure.

5. Do not use if there is any damage to the light

or cord insulation. Inspect periodically.

6. Do not submerge flexible light in liquids,

or use the product in the vicinity of

standing water or other liquids.

7. Secure this flexible light using only the

hangers or clips provided. Do not secure this

product or its cord with staples, nails, or like

means that may damage the insulation or

permanently attach to the building structure.

8. Do not subject flexible lighting to continuous flexing.

9. Do not exceed the length in feet

permitted by the marking.

10. This product has a polarized plug (one blade is

wider than the other) as a feature to reduce the risk

of electric shock. This plug will fit in a polarized

outlet only one way. If the plug does not fit fully

in the outlet, reverse the plug. If it still does not

fit, contact a qualified electrician. Do not use

with an extension cord unless the plug can be

fully inserted. Do not alter or replace the plug.

11. WARNING! When using outdoor-use

portable lighting products, basic safety

precautions should always be followed to

reduce the risk of fire, electric shock and

personal injury, including the following:

a. Ground Fault Interrupter (GFCI) protection

should be provided on the circuits or outlet to be

used for outdoor use flexible lighting product.

Receptacles are available having built-in

GFCI protection for this measure of safety.

b. Use only outdoor extension cords, such as

type SW, SOW, STW, STOW, SJW, SJOW,

SJTW, or SJTOW. This designation is

marked on the wire of the extension cord.

12. Verify that installation surface has no hidden

utility lines before drilling, driving screws.

13. Place/mount the LED Rope to prevent

tripping or choking. Keep out of reach

of young children and babies.

14. People with pacemakers should consult their

physician(s) before use. Electromagnetic fields in

close proximity to heart pacemaker could cause

pacemaker interference or pacemaker failure.

15. Install only according to these instructions.

Improper installation can create hazards.

16. Wear ANSI-approved safety

goggles during installation.

17. This product is not a toy. Do not allow

children to play with or near this item.

18. Use as intended only.

19. Maintain product labels and nameplates.

These carry important safety information.

If unreadable or missing, contact

Harbor Freight Tools for a replacement.

SAVE THESE INSTRUCTIONS.

Page 3For technical questions, please call 1-888-866-5797.Item 56423

Installation and Operation Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document

including all text under subheadings therein before set up or use of this product.

To prevent serious injury: Disconnect power before adding segments. Only use 56423 segments. Make sure

that all connections and the end cap on the last segment are tightly secured to preclude the entry of water.

Rope Light Assembly

1. The Rope Light can be left loose, wall mounted or

wrapped around an object such as a fence rail.

Notice: Place/mount the Rope Light to

prevent tripping or choking. Keep out of

reach of young children and babies.

2. Carefully unpack and uncoil the Rope Light.

Do not cut or nick the Rope Light.

3. If using only one Rope Light, keep Power

Cord and End Cap connected. Make

sure the End Cap is secure.

4. If attaching additional segments, remove End

Caps and Power Cords as needed. Connect

segments together by screwing the Locking

Ring at the end of one segment onto the

threads of another segment until tight.

End

Cap

Locking

Ring

5. After all segments are connected, connect Power

Cord and End Cap, tightening both securely.

Wall Mounting

1. WARNING! Select a location without

hidden cables or utility lines. Turn off all

power in the wall for added safety.

2. Carefully measure the mounting path and ensure

the Power Cord’s plug or extension cord reaches

the outlet without straining the cord or lights.

3. Mark and drill holes for the Clips one

foot apart from each other.

4. Position the Clips over the holes and

secure in place with the Wall Screws.

5. Push Rope Light into Clip opening until it snaps in

place. Continue for the full length of Rope Light(s).

Clip Wall

Screw

Wall

Rope Light

Clip

Wrapping Around an Object

1. Carefully measure the mounting path and ensure

the Power Cord’s plug or extension cord reaches

the outlet without straining the cord or lights.

2. Wrap the Rope Light(s) around the object using the

included Mounting Ties to secure the lights to the

object. Space the Mounting Ties one foot apart.

Operation

To turn the Rope Light on, plug into 120VAC, GFCI protected outlet.

Fuse Replacement

1. Grasp plug and remove from the receptacle or other

outlet device. Do not unplug by pulling on the cord.

2. Open fuse cover. Slide open fuse access cover

on top of attachment plug towards blades.

3. Remove fuse by carefully pulling one side

out of the clasp and then the other side.

4. Risk of fire. Replace fuse only with 5 amp,

125 Volt fuse (provided with product).

5. Close fuse cover. Slide closed the fuse

access cover on top of attachment plug.

6. Risk of fire. Do not replace attachment

plug. Contains a safety device (fuse) that

should not be removed. Discard product

if the attachment plug is damaged.

Spare

Fuse

Live

Fuse

26541 Agoura Road • Calabasas, CA 91302 • 1-888-866-5797

Limited 90 Day Warranty

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards,

and warrants to the original purchaser that this product is free from defects in materials and workmanship for the

period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly,

to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper

installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries

to persons or property, or for incidental, contingent, special or consequential damages arising from the use of

our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the

above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us with transportation charges

prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If

our inspection verifies the defect, we will either repair or replace the product at our election or we may elect

to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return

repaired products at our expense, but if we determine there is no defect, or that the defect resulted from

causes not within the scope of our warranty, then you must bear the cost of returning the product.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

Record Serial Number Here:

Note: If product has no serial number, record

month and year of purchase instead.

Note: Some parts are listed and shown for

illustration purposes only, and are not available

individually as replacement parts.

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM

IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR

MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS

QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE

ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY

STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND

LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY

ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS

THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Parts List and Diagram

Part Description Qty

1 Rope Light 1

2 Mounting Tie 18

3 Power Cord 1

Part Description Qty

4 Fuse, 125V 5A 2

5 Clip 18

6 Wall Screw, 3 x 16mm 36

Other Luminar Outdoor Lighting Equipment manuals

Luminar Outdoor

Luminar Outdoor 70278 Assembly instructions

Popular Lighting Equipment manuals by other brands

Brizo

Brizo 8SP-MU-4 manual

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 installation instructions

IKEA

IKEA BJÖRKSPIREA manual

Laserworld

Laserworld Evolution Series ES-400RGB manual

Alien

Alien RG STAR user manual

EuroLite

EuroLite LED B-40 user manual

Qazqa

Qazqa Suplux SL 3 Black 103062 instruction manual

Commercial Electric

Commercial Electric 54568141 Use and care guide

CREE LIGHTING

CREE LIGHTING 304 Series installation instructions

Goobay

Goobay 49867 user manual

ECOMAN ITALIA

ECOMAN ITALIA LED T8 instruction manual

Alkalite

Alkalite Krypton KT-81 user manual

Clas Ohlson

Clas Ohlson GU10 manual

DTS

DTS DELTA 10 F user manual

ring

ring Solar Steplight manual

One Stop Gardens

One Stop Gardens 57696 Owner's manual & safety instructions

Chauvet DJ

Chauvet DJ COREpar UV120 ILS user manual

SIREM

SIREM Swimeo A2 instructions