LP&No.1 LPSC-027 User manual
Vintage Turntable
Model: LPSC-027
Instruction Manual
PLEASE READ THIS MANUAL CAREFULLY BEFORE USE AND KEEP IT FOR
FUTURE REFERENCE
BEFORE USE
1. Choose a safe location and avoid placing the unit in direct sunlight or near any heat
source.
2. Avoid environments subject to vibration, excessive dust, cold or moisture.
3. Due to the risk of electrical shock, do not open the cabinet. Should a foreign object
accidentally find its way into the interior of the unit, contact your local dealer.
4. Do not attempt to clean the unit with chemical solvents as this might damage the
finishing. A clean, dry cloth is recommended for cleaning.
5. Keep this manual for future reference.
TURNTABLE PARTS:
1. Speakers hidden in the front feet
2. Turntable Platter
3. Slip Mat
4. Lift Lever
5. Turntable Arm Lock
6. Auto Stop Control Switch
7. Speed Selection Switch
8. Turntable Shaft
9. Turntable Arm
10. Indicator
11. Power ON/OFF Control and Volume Knob
12. Phono Stylus Cartridge
13. Removable Dust Cover
14. Hinge
15. RCA Output Jack
16. USB Jack
17. DC IN Jack
18. Function Mode Switch Button
PACKAGE INCLUDED:
The package includes below main unit and accessories. If anything missing, please feel free
to contact our after-sale service team via email LP0613@outlook.com
1. LPSC-027 Vintage Turntable
2. Extra Stylus Replacement
3. Audacity Software CD
4. 12V 1A Power Supply Adapter
5. USB Cable
6. User Manual
7. Warrantee Card
8. 45RPM Adaptor
GETTING STARTED
Fix the dust cover onto the hinges.
Firmly and securely insert the DC plug of the adaptor to the DC IN Jack on the back of the
turntable.
Plug the adapter’s AC plugs into a power outlet.
PHONO MODE
1. Press down the Function Mode Switch Button and it is PHONO mode and the indicator
will become red color.
2. Raise the dust cover
3. Turn the Power ON/OFF Control and Volume Knob and the indicator will in red color.
4. Place a record on the turntable platter and set the player speed to match the record
speed.
NOTE: when playing a single (a 45 rpm record) and/or records with large centre holes,
use the 45 rpm adapter.
Remove the needle cartridge protective cover and unlock the tone arm lock from the tone arm
rest. Push the lift lever backward, the tone arm will gently rise up. Gently move the tone arm
to the desired position over the record and the turntable platter will begin to rotate when the
arm is moved towards it if Auto Stop Control Switch is ON. Release the tone arm onto the
turntable by pushing the lift lever forward and the vinyl record will begin to play.
If the Auto Stop Control Switch is turned ON, the record will stop automatically when finished.
If Auto Stop Control Switch is turned OFF, the record will NOT stop automatically when
finished.
Remark: AUTO STOP function applies to most 33RPM vinyl records. However, for very few
vinyl records, it will stop when it does not come to the end(in this case, turn the AUTO STOP
switch to OFF position and then it will continue playback), or it will not stop when it comes to
the end when AUTO STOP is ON.
5. Connect the RCA Output Jack to the external speaker system(with power amplifier built-in)
with the RCA cable (not provided) to enjoy vinyl records music on your speaker system.
BLUETOOTH MODE
1. Press up the Function Mode Switch Button and it is BLUETOOTH mode. The indicator will
become blue color with flashing.
2. Turn on your Bluetooth function on your mobile phone or tablet PC and then search the
turntable player with its name LPSC-027 . After pairing and connection, the indicator will
become blue color without flashing, and you can play your music of your mobile phone or
tablet PC on this turntable player.
During paring and connecting process, if the mobile phone or tablet PC ask for password,
then type in 0000.
3. Turn the VOLUME CONTROL KNOB to adjust the volume.
Remark: the mobile phone or tablet PC's volume level also impact the overall volume; please
adjust that as well to have a satisfying sound
HOW TO REPLACE THE NEEDLE
To replace the needle, please refer to the instructions below.
Removing the needle from the cartridge
1. Place a screwdriver at the tip of the needle headshell and push downwards in the
direction shown in sketch “A”
2. Remove the needle headshell by pulling it forwards and pushing downwards.
Inserting the needle
1. Hold the tip of the needle headshell
and insert it by pressing in the
direction illustrated by”B”.
2. Push the needle headshell upwards
in the direction illustrated by “C”
until the needle locks into the tip
position.
RECORD YOUR VINYL TO YOUR APPLE COMPUTER
For MAC, please go to http://www.audacityteam.org and download the latest version of the
MAC software.
RECORD YOUR VINYL TO YOUR WINDOWS PC
1. Setup
Connect the USB cable with your turntable and your computer. No extra driver is
required.
2. Audacity Installation
Insert the installation CD. Your computer will auto-run the program. Follow the
instructions to complete installation.
If your computer does not auto run, click on the “Start” menu, select “Run” and choose the
CD located on your computer and run “Setup.exe”
3. Run Audacity Program
Double-click on the Audacity program and the Audacity interface window will be displayed
on your computer screen.
4. Playback Control Toolbar
Audacity will display a control toolbar for you to edit and manage your recordings.
5. Playing Your Record
Play the record you want to record by following the procedure described in the section
“LISTENING TO A RECORD”
6. Adjusting Input and Output
Adjust the output and input volume.
7. Recording
Select the RECORD button to start recording while your record is playing.
You will need to position the needle on the record for a few seconds before the track starts,
so that you select the RECORD button at the beginning of your track.
Start playback on the USB turntable. You will see the waveform of the audio on the screen
as it is recording. You will hear the audio coming from the output of your computers
soundcard.
No Audio? - go back to the preference menu and make sure you have “Software
Playthrough” selected and the speaker volume up on your computer.
Press Stop
SAVE YOUR FILE NOW by clicking on “File” followed by “Save Project”
Select the destination and file name for the project and click “Save”
Once finished recording, your screen should display your recording as below.
8. Editing your Recording
Audio Levels
Select your entire recording by selecting “Edit,” then “Select…” then click “All.”
Select the “Effect” menu and choose the desired effect. There are various types of effects
which are described further on Audacity’s website.
Selecting “Normalize” should be used to have Audacity auto-correct volume on the
recording.
Noise Reduction
Drag your cursor over a portion of the audio track which contains unwanted noise. We
recommend using the beginning or end of a track where there is no music and only
noise.
Table of contents
Other LP&No.1 Turntable manuals
