Lorex DXR4280UQ Quick start guide
INSTALLATION OF THE HARD DISK DRIVE
IN THE DXR4280UQ (80 GB HDD)
The HDD serves the same purpose in a DVR as a video cassette does in a VCR.
However, installing the HDD is a bit more complicated. Please follow the next steps
carefully in order to ensure proper installation.
The compartment located on the front panel of the DVR is the removable Cartridge Casing in which you
insert the HDD. The various parts of the Cartridge Casing are labeled for your reference.
Cartridge Casing
YOU MAY FIND THAT THE CARTRIDGE CASING IS LOCKED. IN THIS CASE, SKIP
AHEAD TO STEP 8 TO FIND INSTRUCTIONS ON UNLOCKING THE CABINET, THEN
RETURN TO STEP 2.
2. Remove the Cover from the Cartridge Casing
a) Unclip the release latch with the word “OPEN” printed beside it by gently pushing on the latch.
b) Slide the cover off the Cartridge Casing.
1. Keyhole
2. LED indicator lights
(Power indicator & HDD Access indicator)
3. Handle
1
3 2
1. Remove the Cartridge Casing from the DVR
Lift the Handle and pull towards you. The Cartridge Casing will slide out of the DVR.
3. Connect the 80 GB HDD into the Cartridge Casing
Take the Hard Disk Drive and Connect the two cables from the back of the Cartridge Casing to the HDD.
The cables should be pushed in firmly, but not forcibly.
PLEASE MAKE SURE THAT YOU SET THE HARD DRIVE TO MASTER. FOR MORE
INFORMATION PLEASE CONTACT THE MANUFACTURER OR REFER TO THE
OWNER’S MANUAL
The 4 Pin connection is the DC Power cable, and the wider cable is the standard Hard
Drive IDE type connection.
4. Secure the HDD in the Casing
Use screws and tighten them, positioning the HDD into place. This step is optional, but it is recommended.
7. Lock the Cabinet. Lock the cabinet by turning the key clockwise.
A
(locked)
B
(unlocked)
If you need to unlock the cabinet, turn the key counter-clockwise from the position shown above.
IF YOU DO NOT LOCK THE CABINET, THE DVR SYSTEM WILL NOT FUNCTION
PROPERLY.
www.lorexcctv.com
PLEASE MAKE SURE THAT YOU SET THE HARD DRIVE TO MASTER. FOR MORE
INFORMATION PLEASE CONTACT THE MANUFACTURER OR REFER TO THE
OWNER’S MANUAL
8. Turn ON the DVR .The system will boot up and will detect the Master hard drive
5. Slide the top Cover over the Cartridge Casing
Slide the Cover forward over the Cartridge Case. Ensure it is secured in place over the release latch.
6. Reinsert the Cartridge Casing into the DVR. Fully insert the Cartridge Case into the DVR.
Table of contents
Other Lorex DVR manuals
Lorex
Lorex LH400 LINK SERIES User manual
Lorex
Lorex LH314 Instruction Manual
Lorex
Lorex D841 Series User manual
Lorex
Lorex ECO 2 User manual
Lorex
Lorex D881 Series User manual
Lorex
Lorex SG19 Series Operating instructions
Lorex
Lorex N843 Series User manual
Lorex
Lorex LH120 Series User manual
Lorex
Lorex LHA2000 Series Instruction Manual
Lorex
Lorex LHD200 User manual
Lorex
Lorex LHV5100 Series User manual
Lorex
Lorex LHB926 Series User manual
Lorex
Lorex N91 Series User manual
Lorex
Lorex L284161 User manual
Lorex
Lorex QLR464 User manual
Lorex
Lorex VANTAGE LH110 ECO SERIES Installation guide
Lorex
Lorex QLR1660 User manual
Lorex
Lorex L3104000 User manual
Lorex
Lorex SC325000 User manual
Lorex
Lorex ECO LH100 SERIES User manual
