Logitech G923 User manual
G923
Racing Wheel and Pedals For Xbox One and PC
Volant de course et pédales pour Xbox One et PC
SETUP GUIDE |GUIDE D’INSTALLATION
ENGLISH . . . . . . . . . . . . . . . . . . . . . . . . .3
FRANÇAIS . . . . . . . . . . . . . . . . . . . . . . . 14
ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . . .25
PORTUGUÊS . . . . . . . . . . . . . . . . . . . . . . 36
G923
620-008916.002
USB USB
1
3Xbox One PC
2
logitechG.com/support/g923-xb1
3ENGLISH
CONNECTIONS AND MOUNT POINTS
1 Mounting clamps
2 Cable management cleat
3 Optional shifter connection (DB-9 male)
4 USB cable
5 Pedal unit connection (DB-9 female)
6 Power connection
7 Bolt mounting points (uses M6X1 bolts)
OPTIMAL CABLE ROUTING
USB and pedal cables (1, 2) should be routed through inner
channels.
Power and optional shifter cables (3, 4) should be routed through
outer channels.
Cables may be wrapped multiple times around cable
management cleat to take in slack.
2
3
4
1
5
6
7
14 2 3
4
3
21
4ENGLISH
USB
Xbox One
USB
PC
INSTALLATION — XBOX ONE
— PC
Attach power adapter and USB cables as shown.
Every time your racing wheel connects with your system, it will
rotate fully to each side and then to the center to calibrate.
Yourwheel will be ready once this calibration is completed.
For PC to enable the force feedback and RPM LED features on
your G923 Wheel and Pedals you must install the Logitech G HUB
software. This can be found at logitechg.com/support/g923-xb1
5ENGLISH
MOUNTING CLAMPS
G923 Racing Wheel is equipped with a built in clamping system
for mounting to a table.
Push down and rotate clamp knobs to lock or unlock.
Rotate clamp knobs to tighten or loosen clamps.
Note:
Clamp extenders should be removed for attachment
tothickertables.
6ENGLISH
BUTTONS
1 Left bumper
2 Directional pad
3 View button
4 Left stick button*
5 +/- Setting Adjustment buttons*
6 Right bumper
7 A, B, X, Y buttons
8 Menu button
9 Right stick button*
10 Setting Selection Dial and select button*
11 Xbox button
2
3
5
4
1 6
7
8
10
11
9
* requires supported games on Xbox One. Assignable in any game on PC using either in-game assignment
orLogitech G HUB software.
7ENGLISH
FORCE FEEDBACK
Your Racing Wheel contains dual motors that will provide
forcefeedback with supported games and systems.
In supported titles you will also experience our next generation
approach to force feedback: TRUEFORCE.
TRUEFORCE integrates directly with game physics and audio
to unlock high-denition, real-time force feedback. Tire grip,
suspension, weight, horsepower—even unique engine sound
resonance—are immediately and accurately felt through
thewheel.
Supported titles on Xbox One and PC may implement
TRUEFORCE high-denition force feedback. For a list
ofsupported titles visit logitechg.com/support/g923-xb1
Note:
Your Racing Wheel has an overheat protection circuit safeguard
to protect it under high-temperature operating conditions.
Inrare instances, force feedback features may shut down
duringuse while controls continue to operate.
If this occurs, allow the wheel to cool down and power it down by
unplugging it. If this occurs frequently, contact product support.
8ENGLISH
FEATURES
1 Clutch pedal
2 Brake pedal
3 Throttle pedal
4 Textured heel rest
1 2 3
4
9ENGLISH
5 Bolt mounting points (uses M6X1 bolts)
6 Patented carpet grip system
7 Carpet grip release clip
Push towards rear of pedal unit to release
8 Change pedal face position (requires 2.5mm hex key)
5
6
7
8
10 ENGLISH
USING THE DUAL CLUTCH IN-GAME
Using a dual clutch system from a grid start in a race
enables you to achieve maximum traction without the need
tond thebite point of your clutch pedal - this can give you
asignicant advantage at the start of a race.
To use the dual clutch system in-game:
1 At race start, fully depress the clutch pedal and the button
assigned to the dual clutch function (see next section for
setting instructions).
2 Select rst gear using the Gear Up Paddle and fully depress
the gas pedal.
3 As soon as you get the green light for race start, immediately
release the Dual Clutch button. The car should start moving
as the bite point of the clutch is engaged.
4 Smoothly release your foot from the clutch pedal in order to
achieve maximum traction. It’s worth practicing this last step
and modifying the bite point setting several times to nd
amethod that works for you. Once you have it perfected,
this feature can help make up several places on the grid.
Note:
Support for the dual clutch function is not possible in some
games. A list of games that support the dual clutch feature can
be found at logitechg.com/support/g923-xb1
SETTING UP THE DUAL CLUTCH SYSTEM
1 Press and hold the left and right gear paddle and Left stick
button and Right stick button together for two seconds to
enter dual clutch setting mode. The RPM LEDs will illuminate
blue and ash slowly:
Note:
Whilst in the Dual Clutch setting mode the RPM LEDs will not
respond to the game/SDK
Other manuals for G923
4
Table of contents
Other Logitech Video Game Controllers manuals
Logitech
Logitech F710 User manual
Logitech
Logitech 920-000946 - G13 Advanced Gameboard Command... User manual
Logitech
Logitech G940 User manual
Logitech
Logitech Wireless Guitar Controller User manual
Logitech
Logitech F510 User manual
Logitech
Logitech 939-000183 - Wireless Drum Controller User manual
Logitech
Logitech 963283-0403 - Freedom 2.4 Cordless Joystick User manual
Logitech
Logitech Freedom 2.4 User manual
Logitech
Logitech G940 User manual
Logitech
Logitech G940 - Flight System Joystick User manual
Logitech
Logitech Bluetooth wireless hub User manual
Logitech
Logitech PRO RACING WHEEL User manual
Logitech
Logitech 963435-0403 - ChillStream Game Pad User manual
Logitech
Logitech G27 RACING WHEEL User manual
Logitech
Logitech WingMan User manual
Logitech
Logitech Gamepad F310 User manual
Logitech
Logitech G920 Driving Force User manual
Logitech
Logitech Gamepad F310 User manual
Logitech
Logitech X56 HOTAS User manual
Logitech
Logitech 963262-0403 - Cordless Controller For PlayStation Game... Owner's manual
